It sounds like a big block chevy even though it's only 4.0 Liters haha
@GamingByBaka
3 ай бұрын
Last guy with the Hilux is silly AF for doing chambered mufflers, and separately choosing not to do a crossover pipe. what a way to kill potential torque/HP/mpg
@bergchace
4 ай бұрын
Aaayyyyye that’s my 8-1 header for the FRS
@user-wd6jf5ee3z
4 ай бұрын
thank you 🙏🏽
@BasketballAve
5 ай бұрын
Dang I can’t fit those in my 92 ls400 but sounds beautiful
@fnafplayer6447
6 ай бұрын
Oh hell yeah, I need one of these for a datsun im looking at. Also your voice sounds so bored 😂
@robertburton8055
6 ай бұрын
I wish ELH and 180 degree headers were mass produced and able to be purchased
@SimanSlivar
7 ай бұрын
4-2-1 minifolds on a non-flat plane is 100% useless...
@Chillin4030
9 ай бұрын
i like how it sounds like a mix between an ls and coyote for most of them
@IszBuB
9 ай бұрын
That's insane ❤❤ nice
@lexomotorsports
9 ай бұрын
Badass
@6shot9
9 ай бұрын
Damn son
@AndrewShingange
11 ай бұрын
Watching this video all over again to try and rank these noises in my opinion and note which ones to try out, given the chance...
@AndrewShingange
11 ай бұрын
00:10 - Great noise for a toy car - Nice meaty roar 04:05 - Tri-Y a very close second for me! I would totally get it if they made 1st place for someone else! 05:14 - Block huggers sound super mean, love the deep notes. Not the greatest rev sound 02:00 - Boring, ordinary V8 sound. Sounds great while drifting but not on the dyno 03:05 - Pretty ordinary 04:55 - Same...
@AndrewShingange
11 ай бұрын
Nah, that first car sounds like tigers fighting inside an empty room!!😭😭😭😭
@AndrewShingange
11 ай бұрын
I bought a BMW e12 for cheap because I love the shape and think it's gonna make for a great project car. I would love a rowdy v8 for it eventually it but would hate to put a non-BMW engine in it but I CANNOT get over the sound that these UZ engines make!!!😭😭😭NO BMW ENGINE SOUNDS ANYTHING LIKE THIS!!!🙌🏾🙌🏾🙌🏾😭😭😭
@BingBangBrine
11 ай бұрын
2:13
@johnauer-pv8pv
Жыл бұрын
😀 "PromoSM"
@paradox5087
Жыл бұрын
Design me a M50B25 E36BMW equal length long tube header
@ShaikhOsamaa
Жыл бұрын
How does the blue corollas Toyota v8 sound like an old school muscle or LS.. ???? 😍😍😍
@timothyshearer6538
Жыл бұрын
Hey Im curious if you have a 3UZ swap video on your 4runner? I have a 92 im thinking about swapping!
@drivingmonkeyofus6239
Жыл бұрын
was not my video, and im not sure if it was a 1uz or 3uz tbh
@travisstamp7428
Жыл бұрын
Do 1UZ vvti and non-vvti engines use the same header? I have a gs400 that I want headers for.
@drivingmonkeyofus6239
Жыл бұрын
i do not believe so, i think the exhaust ports and the bolt pattern changed. i could be wrong, though
@shanerobinson1050
Жыл бұрын
Seems like intake manifold and custom headers are the magic behind these engines!! 300+ whp easy!
@fredjones554
Жыл бұрын
Thanks for starting the video with the sound. U r a legend
@nathanheyburn6735
Жыл бұрын
the last set is mine how can i send you a video its running now and sounds awesome!
@drivingmonkeyofus6239
Жыл бұрын
Hey, I can send you a message on FB! I'm in the 1UZ Forced Induction page on there!
@kristapsvoronovs9994
Жыл бұрын
Wwwwwoooooowwwww
@Tatarinfidel
Жыл бұрын
This car sounds like DMX on startup
@l7ragoon
Жыл бұрын
I've been looking for a long tube equal length for my ls400 1999 for my Vip build. I might have to relocate and do a tuck radiator and then hopefully source someone to make the headers.
@shiningstaer
Жыл бұрын
Do you bend the pipe? Or just cut straights and have premade bends? Asking as a beginner
@drivingmonkeyofus6239
Жыл бұрын
Some people bend the pipes and weld them, some people do "pie cut" and weld them together, some people do "mandrel bends" and cut them to size!
@jameswaldron9280
Жыл бұрын
Might have to do this when I get a Lexus ls400
@drivingmonkeyofus6239
Жыл бұрын
Might be a tight squeeze, but with enough time and effort, anything is possible!
@taylordooley3765
Жыл бұрын
I feel the FRS headers might be overheating the bay
@drivingmonkeyofus6239
Жыл бұрын
Potentially, but it's all for the sound!
@johnnon6583
6 ай бұрын
With the FRS headers joining cylinders 1-5 and 3-7 doesn’t seem right because of the firing order. Surely it should be 1-7 and 3-5 which keeps the pairs 180° rather than 270° and 90°?
@Twobarpsi
Жыл бұрын
I put a 1UZ in a 91 Miata 👍
@drivingmonkeyofus6239
Жыл бұрын
Share some videos!!!
@Tommyg-rq6lj
Жыл бұрын
It sounds ANGRY
@robwhite240z
Жыл бұрын
Real tuned exhaust kzitem.info/news/bejne/oq59x2qYsoyqgqw
@drivingmonkeyofus6239
Жыл бұрын
I've started watching his videos, definitely a TON of extremely good info to parse through!
@WorivpuqloDMogh
Жыл бұрын
Damn this car roars. Sounds sooo fcking good
@buckstarchaser2376
Жыл бұрын
Blue Man Group called... ...They didn't leave a message.
@fastinradfordable
Жыл бұрын
You are surrounding the engine with lava. Let’s see u idle for 5 min in 90f without catching the paint on fire
@drivingmonkeyofus6239
Жыл бұрын
my biggest concern would be brake lines, not necessarily the paint job
@WattsGemini323
Жыл бұрын
1:19 looks like alot of heat soak though
@drivingmonkeyofus6239
Жыл бұрын
Worth it
@alexairconditioning1581
Жыл бұрын
Woah that sounds amazing
@frostgodx
Жыл бұрын
Fucks this video in video shit lol at least edit out the full screen notification 😂
@drivingmonkeyofus6239
Жыл бұрын
huh
@EnglertRacing96
Жыл бұрын
Wrong lenght
@drivingmonkeyofus6239
Жыл бұрын
5 inches is average
@FUBBA
Жыл бұрын
My mom had SC430 with 3UZ-FE engine that thing had one of the best interiors I have ever seen. The Lexus is beyond comfort.
@drivingmonkeyofus6239
Жыл бұрын
They definitely do have wonderful interiors. Not a fan of the exterior, though :\
@pindanymus3403
Жыл бұрын
Spaghetti headers!
@drivingmonkeyofus6239
Жыл бұрын
yummy
@skullofserpent5727
Жыл бұрын
Um, excuse me?!
@archangel3237
Жыл бұрын
Dude I would hate to be the guy having to do a timing belt on that car
@drivingmonkeyofus6239
Жыл бұрын
I couldn't imagine how annoying it would be having to remove all that piping ever single time you have to get into that area lol
@sinegra30
Жыл бұрын
You do not have to equalized headers length... you just need to equalized headers flow and pressure! No matter if one header's pipe ends up being wider than the other.
@frostgodx
Жыл бұрын
If you want it to sounds like shit listen to this guy
@heinzhaupthaar5590
Жыл бұрын
It's about not having interference from exhaust gas pulses. Therefore no that's not how it works.
@frostgodx
Жыл бұрын
@@heinzhaupthaar5590 you get it. The op you can tell by the way he speaks is ignorant in real power
@seenile6962
Жыл бұрын
Knaww nz plates ...heart. Love it mah bro .....B...E...A....U....tifulllll
@drivingmonkeyofus6239
Жыл бұрын
The UZs are definitely loved very much down under !
@surfofsinify
Жыл бұрын
Holy crap the first are probably going to sound like a flat plane crank V8 just the level of work is mind blowing
@drivingmonkeyofus6239
Жыл бұрын
I'm so excited to hear it lol, its gonna sound bonkers
@surfofsinify
Жыл бұрын
@@drivingmonkeyofus6239 I am going to guess it going to sound close to the ls7 Passat
@drivingmonkeyofus6239
Жыл бұрын
I hope so because that Passat sounds absolutely insane
@surfofsinify
Жыл бұрын
@@drivingmonkeyofus6239 I can't wait to hear that guy set up
@TheGrayWarbler
Жыл бұрын
Im 99percent sure I took the gearbox out of that blue corolla once. It ran 10second 1/4 miles and was on nos
@drivingmonkeyofus6239
Жыл бұрын
Do you have any videos or other info on it?
@TheGrayWarbler
Жыл бұрын
@@drivingmonkeyofus6239IF I am right, my workmates brother owns/owned it. I'll see what I can find on it for you
@TheGrayWarbler
Жыл бұрын
@@drivingmonkeyofus6239 Its been sold. Its now sporting a silver wrap and is turboed. FYI, If you weren't aware, this is from New Zealand. Cheers
Пікірлер