I have a 10,000 gallon in-ground pool that is filled with well water and have the same problem. I put my chlorine tablets in the skimmer basket rather than a floater and the ‘brown’ stained water then passes through my sand filter before coming back to the pool. Perfectly clear pool since I started doing this. I just backwash the sand filter once a month to remove the iron staining.
@jasminemorris5173
Ай бұрын
I leave in the city and when i filled my pool up the water came out looking just like this !! We shocked it and put liquid chlorine in it as well it still looks like green tea water,Any suggestions what should we do ?
@alfredough
3 ай бұрын
Absolutely great idea. Now let me find my damn crowbar! I had two laying around
@tonyb2337
2 жыл бұрын
I get a 0205 and 0305 on a 2014 Grand Caravan. It comes and goes but the problem mostly occurs when the engine is hot. (the radiator fan does work). I think its the PCU. I may spray component cooler on it to lower the PCU temperature and to see if it clears the problem. Any opinion on that idea?
@dodgeyaussie
2 жыл бұрын
This was a great idea!
@jacemarble1258
3 жыл бұрын
Short sweet straight to the point thank you!
@frijus100
3 жыл бұрын
hi i conect tester to injector plug.i one tester wire i conect to pisitive in plug o nather wire on positve batery and show voltage
@luisaceves6310
3 жыл бұрын
How much was the pcm???
@bobbiehoward3796
4 жыл бұрын
What if you rip the thing apart before you get it off. Left with just the metal band that is stuck. Husband doing this job with a autozone loaned puller.
@KryptaKnight
4 жыл бұрын
How did you remove the actual harmonic balancer pulley AFTER you removed the bolt?
@lsellclumanetsolarenergyll5071
4 жыл бұрын
Yes you used a 3 clamp pully for that. Also there is under your belt tensioner a 16mm bolt so don't forget that one.
@KryptaKnight
4 жыл бұрын
@@lsellclumanetsolarenergyll5071 I call it a 3 jaw puller. Thats the same thing right?
@lsellclumanetsolarenergyll5071
4 жыл бұрын
@@KryptaKnight Yes but might be to long just check it. And you might have to take it apart to fit it into the pully since the space is limited but it works.
What hardware store did u find that bolt..I can't find it.for some reason home Depot and Lowe's skip from m12to m16
@MandR2007
4 жыл бұрын
I went to an Ace Hardware
@MandR2007
4 жыл бұрын
I went to Ace Hardware with my crank bolt to get the exact thread pitch. I had several lengths to choose from too!
@atxjax1
5 жыл бұрын
Thanks for the video. How easy is it to take the timing cover off once you have the balancer off? I just need to replace my timing cover and crank seal because they are leaking oil.
@MandR2007
5 жыл бұрын
Taking off the timing cover was very simple. I suggest buying a new timing cover gasket before you do it though
Sorry Todd I got rid of the car a couple years ago but I still have the manual if you need me to look it up.
@mikemarsh4221
5 жыл бұрын
You sir, are the GOAT! Thanks for the vid!
@mattmgarza
5 жыл бұрын
For reference: I have a 2001 Chrysler Sebring with 2.7 liter engine
@mattmgarza
5 жыл бұрын
my crankshaft sprocket (driving the timing chain) sits behind the harmonic balancer--this tool should help install that as well, correct?
@MandR2007
5 жыл бұрын
I believe so..but I never actually used this for my crankshaft sprocket myself so I couldnt recommend this. I also dont have this car anymore :(
@VijayBhalla
6 жыл бұрын
Very good video, thanks for posting. I was looking for a tool to use on car and now i can easily make own version.
@impalarg2012
6 жыл бұрын
Good looking out .The human mind can accomplish much
@darriuservin9322
6 жыл бұрын
Life saver!
@lsellclumanetsolarenergyll5071
4 жыл бұрын
much easier is if you use your belt. I will publish a video about it here in a few days.
@CraigArndt
6 жыл бұрын
Good job thanks for posting this.
@MandR2007
6 жыл бұрын
Thanks!
@frayjc
7 жыл бұрын
Worked for me🙌
@MandR2007
7 жыл бұрын
This test does show that the PCM is bad and injector driver #4 has a short somehow. I dont know why I didnt try this sooner but I installed my Original PCM, the one with the P0202 code and the P0204 code disappeared and my injector plug at cylinder #4 worked fine! Ill be having a chat with the Module company.
@hankhill6569
7 жыл бұрын
Matt Friesen did you fix it? my 07, 2.7 is doing the same thing.
@MandR2007
7 жыл бұрын
Yeah it was another bad PCM straight from the company. i sent it back and finally got one that worked and my problem went away. I got my refurbished PCMs from Auto Modual Source. Pay the $100 for the lifetime warranty, its worth it.
@j-sinkelly165
4 жыл бұрын
My 08 magnum has the misfire on cylinder 2 but has all 6 injector circuits open codes. How is it showing they are open if the car can still run and drive?
Пікірлер