hi, one of the keayboard screws is completely stripped what can i do now?
@marathabattalionwotblitz
Жыл бұрын
Those subtitles including number of screws & speed of the video are unique/important things for those who wants to disassemble their laptop for the first time 😃🤗👌👍
@Sunnykhutan
2 жыл бұрын
Thank you my Amazing Brother for that 🙏
@thankyouverymochi
2 жыл бұрын
thanks for the guide dude. I successfully clean my fan and motherboard, the instruction was neat and you also show us how to assemble it again. thankyou.
@thankyouverymochi
2 жыл бұрын
bruh my heatsink screw was too tight
@ngarmur
2 жыл бұрын
Thought my laptop was broken but I had to give this tutorial the benefit of the doubt and perhaps break it even further, and guess what?? IT WORKED, props to guys like you man. Y’all are the best 😍
@juanpamontoyav
2 жыл бұрын
Hola qué modelo de fuente de alimentación usa este portátil ? No he podido aún encontrar el modelo exacto, necesito una de repuesto dado que la antigua ha fallado por el tiempo de uso. Alguno sabría ? Gracias
@saramadani8417
2 жыл бұрын
Thanks for the video man but I really don't think I have the courage to reassemble the whole thing by myself I'm afraid I won't be able to put all things back in the right place.
@diysmart
2 жыл бұрын
It’s almost impossible to put a component in the wrong place. My advice is to watch this video during your disassembly and then assembly and pause it while you are doing the same action. Also, it might help you to take a few pictures before you remove a connection or a component. Good luck!
@saramadani8417
2 жыл бұрын
@@diysmart Thank you so much for your reply. Yeah I think I can make it that way.
@user-ww1rv7hb7v
2 жыл бұрын
Thx a lot mate , simple str8 to the point and very good explaining. You earned a like !!
@olegslepehins2095
2 жыл бұрын
what to do if i lost sound after disassembly?
@diysmart
2 жыл бұрын
Go back and check the connections. If this doesn't work, try cleaning the connectors
@olegslepehins2095
2 жыл бұрын
Looks like I didn’t reconnect speaker connector. Thanks.
@olegslepehins2095
2 жыл бұрын
disk driver board connector colors are inverted, not black but white one, i was trying to disconnect the black one like the rest ones and bent it a little bit, only then i realized it was white one, maybe beucause camera zoom was too far away. I have lenovo g50-80. I hope nothing will go wrong later.
@jtalks1047
2 жыл бұрын
bro my screen is not working, how to fix that??
@diysmart
2 жыл бұрын
What do you mean? Can you try connecting an external monitor and see if that one works?
@ashwineekharel2943
2 жыл бұрын
Will I loose my laptop data and documents after disassembling my laptop and reconnecting it. Is it safe to do so ??! Or should I secure my data first.
@diysmart
2 жыл бұрын
It is always a good idea to secure your data. But, if you discharge yourself by touching a metal case that is grounded, everything should be fine.
@ashwineekharel2943
2 жыл бұрын
I poured water in my laptop by mistake and it doesn't turn on. What should I do now?? How can I secure my data ??
@diysmart
2 жыл бұрын
@@ashwineekharel2943 Start by disconnecting the battery, then disassemble the laptop (to the point you still feel confident you can put it back together) and then wipe the water from the components and place everything in a sealed bag filled with rice. Leave the bag sealed for at least 12 hours (better if you can leave it like this for 24 hours) and the rice will absorb all the water. Good luck!
@venomflick3362
2 жыл бұрын
Which processor is this
@OniiRem
2 жыл бұрын
y'all made the base open so easy while I'm struggling xD
@PraisetechGX
3 жыл бұрын
Is it the same z50.?
@diysmart
3 жыл бұрын
Not sure, but they should be pretty similar
@zaidk3112
3 жыл бұрын
Hey... thanks to your video I was able to change my thermal paste. Fixed my overheating problem.
@nayabjahan1204
Жыл бұрын
Which brand thermal paste u used
@somalac
3 жыл бұрын
Saved me about 400 euros. Thank You!!!!
@xerionix2195
3 жыл бұрын
aminoglu klavyeyi nasil cikardin?
@at4396
3 жыл бұрын
I NEED HELP! my laptops screen is black when turn on power, i opened my laptop and one part is missing. at time 2:30 you unplug some part, what i dont even have in my laptop. pls can you help me and tell me what is that part? you unplug it before unpluging usb and audio connecter.
@diysmart
3 жыл бұрын
That part from 2:30 is used by the DVD writer, it is not needed for the display to work. Try to connect an external monitor. If you don't receive video signal on the external monitor, it means that there is something wrong with the CPU/GPU. At this point the repair cost would be too high and I think it would be easyer to change the laptop. If you have any kind of image on the external monitor, try to disconnect the laptop's display and clean the connectors with some alcohol. If this doesn't work, I think the display is broken. A replacement display should be around $50, maybe even less.
@radu5247
3 жыл бұрын
well done!
@syedtariqali604
3 жыл бұрын
Good video . Sir mere pas lenova ka G50 laptop hai uska key bord se jese hi pin cod dalte hain screen ki light chli jati hai . On nhi ho pa rha hai weae screen ati rehti hai ye falt key bord ka hai ya nhi to ap bta dijiye thik krna hai. Plz thnx reply zrur krna
@puginthemug2650
4 жыл бұрын
i was about to clean my laptop from in side but now after see what i have to do i am not going to this is way to complax
@darshanshetty1584
4 жыл бұрын
It was gr8 help.thank u
@Tioy0
4 жыл бұрын
Thanks for the video, however I may have screw things up. When I reboot, it show me an error screen and some boot issue, is it only a connectic issue ? (Default boot device missing or boot failed)
@nandhinisr3443
3 жыл бұрын
bro it means that it cannot recognize any os. just check the drive on other system. if it is fine then reinstall windows
@infantraj6262
4 жыл бұрын
good job man! thanks for this video. very clear steps.
@zirael3765
4 жыл бұрын
thanks bro
@PtaszekZPtasiegoMleczka
4 жыл бұрын
Thank you for the guide, it helped me a lot <3 For some reason my laptop is exactly the same model, but the heat sink extended to what I think was the GPU, so that looked different from yours, where it just covered the CPU. But that was easy enough to figure out.
@lifeissh
4 жыл бұрын
I applied. thank you. But there was no sound from the speaker. help me
@kabirsharma5003
4 жыл бұрын
Is lenovo G50-80 or G50-70 keyboard compatible with Lenovo Z51-70
@diysmart
4 жыл бұрын
I'm not 100% sure, but the dimensions and mounting hardware looks the same. Also, the pin-out should be the same (I see no reason in changing it).
@cgamorph
4 жыл бұрын
You were absolutely fantastic. Thank you
@AldoApachi-
4 жыл бұрын
I had my CPU temps at 80, did a thorough cleaning and now it dropped to 60
@humanbeing2631
4 жыл бұрын
It's too far from the camera
@AbdelrahmanTheGreat
4 жыл бұрын
You are the best . Thank you
@raviuchiha3939
5 жыл бұрын
Dude i broke the keyboard pin... I mean the lid of it came off where you send that transparent sheet. Now what?
@aramisanasazi2833
5 жыл бұрын
Thank you big time!!
@robertxerxes1932
5 жыл бұрын
Initially I wanted to change paste. Then I watched this video. And I like my initial plan less.
@diysmart
5 жыл бұрын
It's less complicated than it looks. Try it and you can use the video also for assembly :)
@robertxerxes1932
5 жыл бұрын
@@diysmart Dont get me wrong, your video is great and I still wanna do it, but though it would be simpler. Can u tell me what is most dangerous part which can go wrong? like scratching cpu or sth?
@diysmart
5 жыл бұрын
@@robertxerxes1932 Just don't use your screwdriver around the CPU and you'll avoid any scratches. For me, the hardest part when I did this kind of operation for the first time was keeping all the screws in order and remember where every screw goes.
@mirceavasile7688
5 жыл бұрын
WOW. It really worked. Thank you. For anyone trying this may I suggest you have patience. Lots of patience. Take it slowly.
@MaRiO1017.
5 жыл бұрын
Thank you very much you helped me
@binger8134
5 жыл бұрын
this looks scary for a person like me
@groadmiralbismarck6625
5 жыл бұрын
Is because that feeling about you will lose the Laptop, i feel this too
@binger8134
5 жыл бұрын
@@groadmiralbismarck6625 hell yeah.....but i did it and its aight....like i just cleaned the fan and didnt de assemble anything else.....i basically did clean everything and it did the trick
@ujwalshah9739
5 жыл бұрын
Where can i find the screws for this? I have lost all of them!!
@nandhinisr3443
3 жыл бұрын
bro if u go any hardware store and say 2x4 and 2x6 screws they will give
@stronglittleman
5 жыл бұрын
Thank you soo much! This is by far the most complete disassembly among other videos
@diysmart
5 жыл бұрын
I'm glad that it was helpful :)
@news.maghribya
5 жыл бұрын
thank you so much for the sharing
@kingschouhan5885
4 жыл бұрын
Can gta5 run In this laptop
@raffrodog
5 жыл бұрын
i actually cut my finger while unpluging one of those plugs..
@cccPaKYccc
5 жыл бұрын
I just wanna see what i need to disassemble to replace thermal paste.
@user-el3pz3fr3q
3 жыл бұрын
Same. But it seems like I have to remove a lot of parts to get to replace that thermal paste 😅
@cccPaKYccc
3 жыл бұрын
@@user-el3pz3fr3q But it was worth it. Laptop is now cool as a breeze even when on bed. You wouldn't believe what difference it makes.
@jayasreek.s8641
5 жыл бұрын
What's its resale value in INR
@diysmart
5 жыл бұрын
It's around $140-360, it depends on the condition of the computer (that's 10000-25000 in INR)
@jayasreek.s8641
5 жыл бұрын
@@diysmart 25k INR is too much coz I bought in 2015 for 29k😀 it's was steal deal that time for 1tb and 2 GB GPU with i3
@jayasreek.s8641
5 жыл бұрын
@@diysmart Thanks for Ur response subscribed to Ur channel 👍
@kappa6244
5 жыл бұрын
can i change the cpu on this notebook? (G50-70)
@diysmart
5 жыл бұрын
No, on this model the CPU is soldered on the motherboard.
Пікірлер