I got a couple questions as I’m going thru the install on my boat now.. is there any way I can send you a couple pics to see if I can mount it where I am thinking..?
@amigosnano
28 күн бұрын
You can send them right here I think.
@ltbackwoods9350
27 күн бұрын
@@amigosnano doesn’t seem to let me attach a picture
@buckshotgeorge7201
2 ай бұрын
I think you need another bump brother…. No offense intended. I do too
@st3v3j
3 ай бұрын
I have a motorcycle I'm looking for sound without spending a ton on a head unit this might be the way I go
@amigosnano
3 ай бұрын
Definitely good for motorcycles or off-road. Doesn't use any space, but you will need a way to get sound from it. An amp, or equalizer, or head unit of some kind to power your speakers.
@jesseburk1986
4 ай бұрын
Nice exactly what I was wanting to know. Head units are a thing of the past.
@dylanyoung2399
7 ай бұрын
Hey there I just got one of these I have the red light but not the blue light
@amigosnano
7 ай бұрын
Check your power and ground connections.
@eprohoda
8 ай бұрын
Thanks, you did unusual edition-have a good one-
@joev8887
Жыл бұрын
I love your energy my brother
@amigosnano
Жыл бұрын
Gracias!
@GbodySS_LsX
Жыл бұрын
Will knock hard as in bass subs
@amigosnano
Жыл бұрын
Sound quality is not bad. Bluetooth technology has approved a ton recently.
@PeteyPablo408
Жыл бұрын
So how does this work on system that has 4 front and rear speakers? Would they all have to be wired to the same so they all work with no front or rear just all the same?
@amigosnano
Жыл бұрын
Whatever speakers are wired to the amp will play the music. This unit plays music thru the amp.
@jamesleee3512
Жыл бұрын
How to get your door speakers to work
@amigosmotorsports7191
Жыл бұрын
This product is for Bluetooth sound to your amp.
@robertovalentin1482
Жыл бұрын
Hell yeah no more Deck for me 😅
@dlsjunkremoval
Жыл бұрын
Mines is hooked up just like yours and I’m getting a constant blue light. Any help would be great. Thanks
@travelagentdave
Жыл бұрын
Move the remote wire and test it. You will need the unit to power off when you turn your vehicle off.
@dlsjunkremoval
Жыл бұрын
It’s on a motorcycle. Light stay on even without the accessories hooked up to anything. It’s receiving constant power which I know is bad for the battery
@amigosmotorsports7191
Жыл бұрын
Use the blue wire for remote battery to try and make it accessory power only. The unit should not be taking power with the motorcycle off.
@louisbravo5296
Жыл бұрын
How's the sound quality from the receiver
@amigosnano
Жыл бұрын
It's good enough. No static or engine noise. Work just fine.
@peterstathenon7639
Жыл бұрын
Excellent! Thanks. Did you need to make sure that the transducer is level? Also, what did you mean by reset? And will silicone work OK?
@amigosnano
Жыл бұрын
Transducer should be level as possible. Silicon should work jjust make sure it is the type to bond to your surface. I had to reset the unit itself once the transducer was installed. It was giving me funky readings once i tested it on the water.
@peterstathenon7639
Жыл бұрын
@@amigosnano excellent thanks.
@rondenny5773
Жыл бұрын
How is this working out, does the bildge need to have water in it for this to work
@mrvic92154
2 жыл бұрын
Great idea thanks for the video I'm gonna try to use some fine sandpaper and just laid flat on the concrete and maybe just rub it around To keep it flat,
@jimbow56
2 жыл бұрын
Couldn't I just double up the gasket?
@jorgeperez758
2 жыл бұрын
Muy apropiado tu comentario estoy en argentina y hoy he comprado uno Lowrance para mi bote y tenia duda si colocar el trasductor en el espejo o pegarlo en el casco Thanks!!
@amigosmotorsports7191
2 жыл бұрын
intente poner el transductor en el suelo en la parte trasera de su embarcación.
@jorgezamora566
2 жыл бұрын
Can I wire both voice and bass amp to it
@amigosnano
2 жыл бұрын
I would assume a bass amp would work, but without a crossover, you would just get music out of the subwoofer.
@redwood1957
2 жыл бұрын
Images of mountings?
@amigosmotorsports7191
2 жыл бұрын
What would you like to see? The transducer glued in? Or the unit morning on the dash?
@redwood1957
2 жыл бұрын
@@amigosmotorsports7191 Transducer glued in Thank you
@yarnozijlstra753
2 жыл бұрын
Hi dear I Glue it in but the screen depth is changing continusly
@amigosnano
2 жыл бұрын
Reset the unit. It might have to recalibrate. I looked for a video on how to reset it. Worked for me. Wait till you get it on the water for accurate depths. Mine also does not always read perfect all the time and depths change. Overall it give good readings
@yarnozijlstra753
2 жыл бұрын
I reset It en take it out on the leak in Shallow water it reads are not constand in deeper water it Works fine do you have a fix for shallow water. It reads are than 0,7 meters for a couple of seconds en than it goes fliping
@amigosnano
2 жыл бұрын
@@yarnozijlstra753 I do not have a fix, but I know you can off set the depth in the settings to help compensate for your hull in the water. Try that. Remember it is a thru hull read so it is not always going to be perfect reading thru the fiberglass. Once I'm in 5ft of water I don't really need it to read anymore, I know I'm on the shore. Fishing might be different.
@yarnozijlstra753
2 жыл бұрын
@@amigosnano yes that is true thanks
@AlejandroTorres-ug8lh
2 жыл бұрын
My car is turn off and still the on blue light , that’s okey to be like that ?
@amigosmotorsports7191
2 жыл бұрын
No. It is taking power. Move the remote Blue wire to the power. It should shut off the led when car is off.
@alejandroyomartorres2567
2 жыл бұрын
Thanks
@erick462
2 жыл бұрын
@@amigosmotorsports7191 I have a question I have a install o would like to do for myself on a atv I have the amp and Bluetooth receiver. Can I hook up amp directly to battey power from amp to power on batter then ground to battery. Install receiver directly btp amp red to power on amp ground to ground on amp and blue to blue on amp. It amp shut off on it own?
@amigosnano
2 жыл бұрын
@@erick462 yes you can do that. This is exactly what this is made for.
@dlsjunkremoval
Жыл бұрын
@@amigosmotorsports7191 so hook the remote up to power and it will turn off and on?
@K4K96
2 жыл бұрын
I inverted a corded belt sander in my vice and took a couple thousandths off the gear face. Works now without the blowing fuse shenanigans. Safety third🤣🇺🇸
@amigosnano
2 жыл бұрын
Hell yeah. Getrdun!
@meme330212
2 жыл бұрын
Can the transducer with the down scan function also be installed in this way?
@amigosmotorsports7191
2 жыл бұрын
I have no idea. I'm assuming yes. Call Lowrence and ask them. That's what I did.
@bhagwansinghrana8224
2 жыл бұрын
Does it have dual bluetooth connections or built in mic for handsfree calls ?
@amigosnano
2 жыл бұрын
No. That would be a different type of device. This is for Bluetooth connection only. Your looking for a Bluetooth audio transmitter. I have one in my Cruze. They run from a USB connection inside your car. This device does not do that.
@kristoferedelberg5295
2 жыл бұрын
I have this wired up like you showed but it is constantly on (solid blue light). They way you have it wired will it ever power down? I have the remote wire from my amp wired to my head unit so it turns on if/when I turn the head unit on and that seems to be working fine. Appreciate the video, was super helpful.
@amigosnano
2 жыл бұрын
The power for the unit should come from the amp. Your just jumping the power. When your amp powers down everything should. Try to move the power wires all to the remote power and see if it works better that way.
@kristoferedelberg5295
2 жыл бұрын
@@amigosnano That was the ticket. I don't know why it was staying powered on even when the Amp was not, but hooking it up the way you recommended works great. I can switch my old head unit on and it powers it up, send tunes to it and that powers my amp on too. Much more cost effective option that replacing my classic stereo head unit to get bluetooth capability!
@robertovalentin1482
Жыл бұрын
You don't need the Deck to power the amp just connect to a fuse that works with the switch when the car switch is on
@jamesleee3512
Жыл бұрын
@@robertovalentin1482 how do I get sound to my car speakers
@juancharles3656
4 ай бұрын
What does it mean uf only red light is on
@jstarebel
2 жыл бұрын
Thanks for showing the installation of the transducer. I'm needing to do the same installation with my transducer.
@powerstrokeeld
2 жыл бұрын
Nice ww. I am doing this next weekend to my fsw3200
@joshsalmons1
2 жыл бұрын
I would just like to add. If you do this, MAKE SURE you buy 12V DC led light strips. There also sell 5V led strips that are identical. If you hook up the 5V ones they will burn up.
@amigosnano
2 жыл бұрын
Yes, What Josh said. Make sure all the electrical components you use on your RVs that will be hooked into your 12V system match the requirements or you will burn up the product, or worse burn up your electrical. Always, Always, Always use a fuse of some kind to protect your power sources. Yes you have breakers, but fuses will save you and are easily replaced.
@tomhunter1982
3 жыл бұрын
will it work the same on a class d amp or will it need a line output converter?
@amigosnano
3 жыл бұрын
Good question. I'm not sure about this one. If the class d amp only inputs mono, thats the only sound your going to get out of it. RCA cables work the same no matter what kind of amp your using. So I'm going to say yes this should work, but I'm really not sure.
@MrGrassymaps
3 жыл бұрын
This just changed my life. Thanks for informing me on such cool inventions. I’m old school system junkie, now I can throw subs in every fkin thing I drive. 😎
@joshuamontgomery4822
3 жыл бұрын
Does it make any noise when the gears lock up? When I turn mine on there’s crickets. Any advice?
@amigosnano
3 жыл бұрын
No noise. The pump won't work. At first the pump should come on and you should hear it try to spin but it will lock up. It won't spin. When you loosen the gear door of the pump the pump should work. It might spill gas, but it will pump correctly. That's when you should grind the gears down.
@lindavillarreal3519
3 жыл бұрын
I think you did a great job! I’m going to have my husband put lights on our RV. I love the blue!
@amigosnano
3 жыл бұрын
It's not too hard and cost to much to have someone install them. If you have any questions or need help let me know.
@carloscabadas6473
3 жыл бұрын
I did the same you do but no gas is coming out
@amigosnano
3 жыл бұрын
If the pump is turning freely and no pressure has built up the pump may not be good anymore. This trick is to get it to turn freely and unstick the gears. Try to bench test the pump.
@glababit
3 жыл бұрын
If I use a y splitter for to hook up to 4 channel amp will I loose to ability to fade left and right.
@amigosnano
3 жыл бұрын
I'm going to say yes. You have to keep them seperate in order to use the seperate. If you combine the sound it's going to be all one sound.
@nigelgregory5857
3 жыл бұрын
Hi, just purchased the same unit and watched your video on gluing the bullet transducer to the inside of the hull, great video thanks, did it work well in the water and can you do a video on the reset you had to do to get it working. Thanks
@amigosnano
3 жыл бұрын
Sure thing on the reset. I just looked up someone else's video, but I can also do one. Thanks!
@nigelgregory5857
3 жыл бұрын
@@amigosnano Did the bullet transducer work Ok after you glued it to the floor of your boat?
@amigosnano
3 жыл бұрын
@@nigelgregory5857 Yes it did. I have gone out 2 more times and it works perfectly.
@ericmaples2687
3 жыл бұрын
I always thought the transducer had to be physically in the water for it to read
@amigosnano
3 жыл бұрын
@@ericmaples2687 That is true for most of them, however, this particular one does both shoot thru Hull and can be mounted at water level on the transom. I had a hell of a time trying to verify this, but it's true and it works great! I called Lowrence to verify.
@rhettbonifay2944
3 жыл бұрын
Glad you decided to post this. Same issue here now repaired. It was an easy fix for me too.
@dennisbollinger1469
3 жыл бұрын
Thanks, saved me on my 2013 Stealth toy hauler easy fix.
@kriskreates2931
3 жыл бұрын
Yo when I connected mine I got a buzzing noise though speakers. Any idea
@amigosmotorsports7191
3 жыл бұрын
Check the ground. Try to ground it to something other than the amp. See if it works. Buzzing is power wire interference.
@kriskreates2931
3 жыл бұрын
@@amigosmotorsports7191 I switched the ground to the battery and also ran the power wire to a bunch of different things but it was still there. I had to turn the gain all the way down and it want away but then I could barely hear it at full volume from my phone. You think a ground isolator would work?
@amigosmotorsports7191
3 жыл бұрын
@@kriskreates2931 that might work. Or a noise reducer. I have used those before. Some buzzing comes from the engine also. I have noise in my boat and can't figure it out. Same issue.
@harlanhilman
3 жыл бұрын
Thank you!
@FadeToBlackLLC
3 жыл бұрын
Very cool, that looks really good. I just got done installing some on my Fleetwood as well. It's cool being able to use your phone with Bluetooth.
@josephmorro5744
3 жыл бұрын
Dumb question. On a 4 channel amp I hook up both reds from front and rear to the red rca on receiver and same thing with white? Thanks
@amigosnano
3 жыл бұрын
You can use an rca adaptor. 2 male to 1 female or vice versa. You will just need the sound to go into the amp somehow. I usually use the adaptor when using 4 channel amps.
@josephmorro5744
3 жыл бұрын
Got it, thanks for responding. Works great.
@pharaohnile867
3 жыл бұрын
How do I hook this up to a 4 channel amp
@amigosmotorsports7191
3 жыл бұрын
Use the wiring for the amp and connect it to the amp. You can ground it elsewhere if you want. Hot. Remote and ground.
@pharaohnile867
3 жыл бұрын
@@amigosmotorsports7191 ok cause I wanted to but a sound system in my motorcycle I want to use 3 mini amps for highs mids and lows and this blue tooth receiver has 2 rca Jack's . I'm thinking how would I hook this up to 3 amps maybe I need some sort of adapter rca jacks
@amigosmotorsports7191
3 жыл бұрын
@@pharaohnile867 where ever your sound comes from is where you hook the RCAs to. It should work. Good idea by the way.
Пікірлер