I thought that was a tech target eliminator at first
@Someone-D20
7 ай бұрын
Man..idk if you see this comment but. This helped me a lot. You gained 1 more subscriber. Thank you. Just fixed my blaster👍🥹
@ImIndeedCappy
10 ай бұрын
I know this is a old video, but can someone tell me if those mods work on similar/other nerf guns?
@Colt159
Жыл бұрын
I just got into modding, wanted something simple and new the maverick was the way to go. Didnt want anything complex and this was AMAZING! thank you!
@abdayan1
Жыл бұрын
Excelente amigo! Tal ves se puede cambiar resorte?
@RealSickduck
Жыл бұрын
The maverick doesnt have a cylinder aligned with the plunger as you prime, so i dont think there will be many problems with vaccum loading. You might have issues with the darts falling too far backing the barrel, though.
@1redeye_
Жыл бұрын
this goddamn metal rod WONT BUDGE this thing is made out of some alien metal bro how tf do you do this
@Chamdar17
Жыл бұрын
An additional/alternative modification for this is to fill the dead-space of the reverse-plunger system. The stationary portion of the air-chamber is "dead-space", it provides an area for air-compression that does not contribute to dart-thrust, an issue eliminated (mostly) by direct-plunger systems. Fill this chamber with styrofoam or other material and let a bit extend out from the back to act as the plunger-padding (instead of trying to glue a pad inside the actual plunger). Then put a stiff tube/straw through the foam to allow air to pass unimpeded from the plunger itself to the rotating cylinder. Another trick is to run a continuous layer of electrical-tape around the back of the cylinder where air exits the plunger-chamber to the dart-chambers and punch holes in it where the cylinder-holes are. As you pull the trigger, the cylinder rotates at a slight distance from the air-port UNTIL the plunger is released at the same time as the dart-chamber is properly aligned, whereupon the plunger shoves the entire air-chamber forward against the back of the cylinder and SEALS against the tape as the air is discharged to launch the dart. This is just one more way to ensure a proper air-seal.
@dar2exl
Жыл бұрын
Very thorough tutorial that will enable me to attempt my first mod. Thank you
@M1A1.
Жыл бұрын
I use different darts and would the penny change how hard the top prime thing is to pull back?
@Alxcorona
Жыл бұрын
Beautiful, ty man
@skye1491
Жыл бұрын
Thank you so much for this easy to follow guide been moding blasters for a bit but not the ubiquitous Mav funny enough. Mines having firing issues I may have put too much tape under the O-ring also think the rotation is hindered slightly by the plastic on top of the cylinder not being hammered in enough
@ryantippett3953
Жыл бұрын
Wish this was the video, that came up when I googled maverick mods. As a newbie I made some mistakes due to an older video telling me to stretch the spring 🤦♂️ You’ve earned my subscription!
@FAITHLOVESYAS
2 жыл бұрын
What is the same size as the tiny priming pin?
@jescowan26
2 жыл бұрын
did all the mods great vid, I'm in Australia so instead of pennys i used 5c coins fits perfect (used 6 cause they look a little thinner) and also weighted the handle with a stack of taped up 20c coins (five down the bottom they just fit ). from a dumpster find to mod firing elite darts thank you kindly
@cobygrant7213
2 жыл бұрын
To lazy to buy a real holster for my airsoft revolver Totally making something like this but like 3x better Thanks 👍
@SawantStudios
2 жыл бұрын
the rod thingy wont pry out for me :(
@alkalakhotia4480
2 жыл бұрын
Is it good for strongarm and disruptor
@goldenlethality
2 жыл бұрын
Good for me I forgot how to put it back LOL
@gaboyyaa
3 жыл бұрын
Thanks bro
@froogy9218
3 жыл бұрын
Amazing video! Will definitely do most of the mods except for the penny one and just buy a stronger spring instead
@birdman4174
3 жыл бұрын
I used a different foam, so will it break?
@whyareyouhere6291
3 жыл бұрын
Aw man I followed lorddraconical's mod for this blaster and he didnt mention to add foam and I damaged my blaster and it broken it can prime and fire but it doesn't fire the dart
@tomanicewood
2 жыл бұрын
Inspect the plunger head, repair if possible, make sure that there is no leak due to a crack
@arsonist7063
3 жыл бұрын
What should I do if when I pry the thing it doesn’t come off
@froogy9218
3 жыл бұрын
Pry harder i guess
@SawantStudios
2 жыл бұрын
okay, so i met with the same exact problem, the thing is, if your maverick is a little newer, maybe the lower pieces are glued to the rod, thats how mine were at least, honestly speaking, i tried to scrape off the glue, but to no avail, you just gotta do the "barrel falls over fully" part.
@carsonkerens2585
3 жыл бұрын
Good and helpful video
@metallightning55
3 жыл бұрын
Is it just me or is the hammer shot’s prime thing really hard to use?
@sonyawhitacre9356
3 жыл бұрын
Just you bro
@metallightning55
3 жыл бұрын
@@sonyawhitacre9356 sad
@NoNo-rd8pv
3 жыл бұрын
Does the holster holds the blaster pretty stable without hot glue?
@burnt_kobold
3 жыл бұрын
If you rap it in duktape will it be waterproof
@benjaminhurley1823
3 жыл бұрын
Dude I can't put the cylinder the way it is supposed to go
@breakthebrain1835
3 жыл бұрын
hey man, currently doing this mod, the issue you're having is you flipped the cylinder on the wrong side, making it impossible to fit, hope i helped
@benjaminhurley1823
3 жыл бұрын
@@breakthebrain1835 dude no joke I am 18 years old I couldn't get it in so I go to my dad he looks at it 30 seconds later he is like " I fixed your thing" lol even after all these years he still fixes my stuff after I have busted it.
@breakthebrain1835
3 жыл бұрын
@@benjaminhurley1823 lol i know dads are like tech support as soon as you call them in you either embarass yourself when they fix it too easily or when you call them in and it works the moment they come in
@J.sacados
3 жыл бұрын
What i need a blaster yo make this holster i thougt that you are gone make a blaster and holster
@aquafountain7680
3 жыл бұрын
I’ve had the Maverick for a long time but if I prime the gun and release the primer at the click it would shoot the gun is it broken?
@neelumrais2228
2 жыл бұрын
?
@hudsonator7434
2 жыл бұрын
no, as long you have any added materials in the spring chamber that would compress the spring then that would be why.
@brunogamesbr1
7 ай бұрын
I had this problem, for me it was that the ring was slipping at the catch, i fixed mine by removing one of the coins to reduce the pressure, and removing some of the lubricant that accumulated on the lower notch of the plunger, 3 years old comment but eh, might help someone in the future
@lyftey542
3 жыл бұрын
I've spent a while trying to do a simple belt method, but your idea is so much better!
@banos3999
4 жыл бұрын
This makes me want to mod mine even more.
@TobiasTheGuy
4 жыл бұрын
does the nerf gun stays in the holster when you jump constantly or running really fast?
@nugget8612
4 жыл бұрын
Can I use this for a roughcut
@jumbopancakenerf6804
4 жыл бұрын
I assume so. Might be a bit bulky but i dont see why it would not be doable.
@evel8768
4 жыл бұрын
Nice
@evel8768
4 жыл бұрын
Bruh don’t wanna break my screw driver
@jumbopancakenerf6804
4 жыл бұрын
If its thick enough it should be fine. I was concerned at first too but those things are pretty strong lol
@hazzy_dabobby9951
4 жыл бұрын
Just for the name u get a sub
@TrevorRS05
4 жыл бұрын
Clean 👌
@jumbopancakenerf6804
4 жыл бұрын
Thanks! How was the quality compared to previous videos?
@TrevorRS05
4 жыл бұрын
I didn’t notice a difference. I record using my iphone and ipad, they have pretty nice quality I would say.
@jumbopancakenerf6804
4 жыл бұрын
@@TrevorRS05 Thanks for the feedback :D
@TrevorRS05
5 жыл бұрын
I love the “pop” noise firestrikes make when you fire them! So satisfying!
@catriellebarnett674
5 жыл бұрын
Very nice professional videos :)
@TrevorRS05
5 жыл бұрын
Dude i love how professional your videos are! Also You should try doing a mod guide on a blaster that doesn’t have many guides on it. (Witch you probably already thought of)
@jumbopancakenerf6804
5 жыл бұрын
Thank you it means a lot when people think my work is good. Professional is definitely a high rank considering I film on my desk after school with 2 desk lamps for lighting XD On the other mod guide note, i definitely intend to do this once i gain more experience. Honestly i am somewhat of a beginner myself at this point. But as for less known blasters i was thinking the clearshot? Not sure how well known it is i personally love it because the grip is super comfortable, and it can take a heavier spring so it can become a pretty powerful pistol. Let me know what you think. Is there another blaster you'd like to see me mod?
@TrevorRS05
5 жыл бұрын
Clearshot would be juicy!
@QuandaleDingle5752
4 ай бұрын
Which*
@TrevorRS05
4 ай бұрын
@@QuandaleDingle5752 nah i was calling him a witch
@natis413
5 жыл бұрын
Wish this video existed back when the maverick first came out I had to figure this all out on my own I didn't know what KZitem was until 2009
@rossvaldez6418
7 ай бұрын
it was EXACTLY the same for me but i was born in 2006 and i was about 4 when i took apart this gun and did something to shoot WAY HARDER just to hurt my sisters and i found youtube in 2012 (6 years old) on my iphone 3 (it was my sisters “old phone” because she just got the “BRAND NEW” iphone 4) what good times back then. we lived in the projects and we were the ONLY white/hispanic family in the complex and all of my friends were black and let me tell you. everyone was so racist to me but at such a young age i didn’t understand what they meant, but looking back at it now i understand it all. 😂😂
@TrevorRS05
5 жыл бұрын
This video was like really professional! or maybe im just super unprofessional in mine \_(‘-‘)_/
@natis413
5 жыл бұрын
I'm not trying to clog your notifications but you could try putting thin strips of plastic like soda bottle plastic along the inside of the magazines to help with jams a little more finagling but it might help
@jumbopancakenerf6804
5 жыл бұрын
That's an interesting idea I'll try next time I do this. And no worries it actually makes me happy when I get notifications about my videos ^^
@natis413
5 жыл бұрын
I was thinking about how to do this thank you
@TrevorRS05
5 жыл бұрын
Noice quality! I made a horrible video about this a year ago, glad im not the only one :D
@natis413
5 жыл бұрын
Good idea why you do this again with corrugated plastic you can get it from most stores that sell yard signs or produce if you ask they may just give it to you
Пікірлер