Mike's Auto Fixin' works to bring you detailed and informative auto repair/maintenance videos.
Пікірлер
@ripandqrmuzik
3 күн бұрын
Thank you so much
@jaydee8337
2 ай бұрын
I did this job......worked fine, BUT, THE PART WAS TOO EXPENSIVE......THEY WERE REASONABLE TILL EVERYONE EVENTUALLY NEEDED THiS FIX....THEN THEY STARTED GOUGING EVERYONE. THERE iS A PROBLEM WITH THE SAME YEARS GROUNDING PROBLEM THAT DESTROYS ALTERNATORS AND BATTERYS. DID THAT JOB TOO.
@TheBioshockkiller
2 ай бұрын
9 years later, and your still helping 💯. Thanks for your help, man!
@YminGraymanne-ng4ey
2 ай бұрын
I thought this was moist critical for a sec
@alienjoe6610
2 ай бұрын
Thanks man shit was easy but making sure that gasket stayed in place was a nightmare
@HenryFruhling-bw3xh
4 ай бұрын
Ford went cheap with the thermostat housing .replaced mine 5 years ago No more leaks.😂😂😂 Common Ford dont be so cheap.
@colingroves9047
6 ай бұрын
I noticed when I went to make this repair I had a lower valance in the way that I had to take off and I noticed you didn’t have one. Do you think it’s safe to leave it off?
@ScottyTownsend91
8 ай бұрын
Ok so I know I’m late but maybe someone can possibly help. I have a 05 mustang that I recently attempted to change the thermostat housing on. After changing it and starting the car, coolant was shooting out from where the thermostat connection resides. It also shout out from the hole next to the connection. I’m confused on what I did wrong.
@N-Scale
9 ай бұрын
Fantastic video and I am forwarding it to my grandson as we will be doing this next weekend.
@perfecto5477
9 ай бұрын
Thanks Mike I have a coolent leak from underneath my engine now I think this is what it is and now see what to do to fix the it. Good job 👍😊
@RoyGutierrez-pf1qn
11 ай бұрын
Damn those 3 bolts came off easy.
@209Nesa
Жыл бұрын
My car recently leaked a little then stopped leaking I’ve been letting it sit for few hours Still no leak. I probably need a new thermostat?
@jeffreygleaves2931
Жыл бұрын
Are the aluminum housings reliable? I've replaced two plastic housings and I'm tired of messing with it. Any problems with sloppy machining or bad fits, etc?
@verinb9
Жыл бұрын
Really wish you were neighbor you're really knowledgeable in this stuff. 🐐
@Frosty_0415
Жыл бұрын
so i was in a rush this morning to work, only had 30 minutes to swap this guy out, and this video really guided me. although i didn’t have time to let it run without the cap. since then my heater only blows cold and AC… also a very old thing, wiper fluid isn’t coming out. gonna try letting it idle for a bit in a few hours without the cap to see if that helps at all
@glennthomas8418
Жыл бұрын
Excellent 👍👍 999
@Jstne420
Жыл бұрын
mine is leaking but can't find metal thermostat housing availble. what gasket maker did you use for this application ?
@kaseyboles30
Жыл бұрын
i've replaced the plastic one on my 07 4 times in 6 years.
@TheRobkwill
Жыл бұрын
Excellent tutorial. Thanks! My daughter's mustang is leaking and I believe this is the culprit.
@sendero-de-vida-aruba
Жыл бұрын
How long did it take to get the job done?
@oziellarareyes2975
Жыл бұрын
Did you had to buy the gasket separately or it came w the part ?
@Lapislazuli29
Жыл бұрын
This video is probably the best one out there. Literally walked me step by step! Thank you so much !
@gachaboiuwuidk3294
Жыл бұрын
thank you
@lincolnhurd4051
Жыл бұрын
Very Detailed & Instrumental. Attention to detail superb
@hugosanchez4593
Жыл бұрын
If anyone can answer my question. If I'm adding coolant back into the system and start my car what happens if the heating in my car doesn't work? I can only run AC atm. Can I just leave my car on and drive around without heating instead and let it run coolant until I need to fill it again?
@Westbound70
Жыл бұрын
thanks for this video, it helped me a lot !
@mrtonytyler
2 жыл бұрын
Nice video you saved me some money thanks 😊
@jacobwilliams7342
2 жыл бұрын
Hey Mike, I am looking to buy the replacement housing since mine is leaking, but everywhere I search does not have the seals with the housing. Where did you purchase the thermostat housing from, and if seperate where did you also purchase the seals from? A link would be extremely helpful.
@adriancano3991
2 жыл бұрын
Great info absolutely impressive
@13salinaspride
2 жыл бұрын
Where's the part number ?
@Billy-ks1xo
2 жыл бұрын
what is the house name called at 13:46
@mikeysanchez4435
2 жыл бұрын
Extremely happy you made this. Saved me $400 at a shop, I’m doing this myself thanks to your video!!
@todd718
2 жыл бұрын
89” pounds to 100” pounds = 7.4 to 8.3 foot pounds
@juliangomez6845
2 жыл бұрын
Thanks so much bro this is the best step by step video that I’ve found !
@jessejackson4631
2 жыл бұрын
I switched off the temp sensor to the new one with the pin but the hole on the right aide of it won't stay cover with the cap and pin it easily pops out...is that normal ? or does that hole and cap need to be tight ? anyone know ?
@gamking7987
2 жыл бұрын
don't you think the metal housing could build up some corrosion in the future? I am getting mine too though just because the plastic ones are a piece of crap, but I will keep and eye on corrosion, I guess we just gonna have to drain the coolant and replace it more often if that happens.
@angelksh567
2 жыл бұрын
Can someone link an aluminum housing from amazon? Plz
@540twisted
2 жыл бұрын
I had a mounting screw break in the engine when removing, still haven’t got it out.
@abtn
2 жыл бұрын
you just earned a subscriber fella
@dodiecasey3277
2 жыл бұрын
I need u to do a video on changing water pump on 2006 Ford Mustang v6
@dodiecasey3277
2 жыл бұрын
I love this video
@dodiecasey3277
2 жыл бұрын
What if I have already by passed the heater coil would I still turn the heater on
@dodiecasey3277
2 жыл бұрын
What if u have already Bypassed your heater coil would I still turn the heater on
@israelnemitz8323
2 жыл бұрын
Beautiful video, great job!
@Loscarrenosdedurango
2 жыл бұрын
Anyone have the link to this ? I have a mustang 2010
@Santiknws23
2 жыл бұрын
I’ve used this video a couple of times. Thanks for an easy step by step video! You rock, man! I finally bought the aluminum housing. I was done tired of that damn plastic one.
@dariogtz
2 жыл бұрын
I know about cars 🚗 and this is a well explained video
@douglaswolf7464
2 жыл бұрын
Thanks Mike, well done all around. And more, thanks for omitting loud & annoying music.
@IAM-ul9rt
2 жыл бұрын
Good job 👍🏾👏🏾👏🏾👏🏾✌🏾👊🏾
@colng5685
3 жыл бұрын
just wondering, can i use gasket maker to replace the paper gastket?
Пікірлер