how heavy is the machiene i have to work with 1 hand♿️♿️
@melekturken5515
11 күн бұрын
Merhaba, cut ve loop aynı çalışmada kullanılır mı ?
@rocionecoechea1727
13 күн бұрын
Thank you so much 😁
@nurpiet
15 күн бұрын
cool that its possible, but aint nobody do all that for every rug
@esrademir6816
22 күн бұрын
E nasıl yapılıyor ayarı ? 🥹
@saudalarouj
27 күн бұрын
Hi i have a issue and i need some tips to fix it
@Tilaummakossa
Ай бұрын
Muito obrigado. Fiquei mal por receer minha tufting gun e não conseguir usá-la e você ajudou muito. Sucesso sempre.
@tuftingeurope
Ай бұрын
Ainda bem que pudemos ajudar. Mais vídeos detalhados em breve.
@Tilaummakossa
Ай бұрын
Cara vc é fantástico na objetividade e praticidade. Você me salvou de verdade.
@aminabubauredi691
2 ай бұрын
I got one of these but i don't know how to change the pile scissors from the loop and mine didn't come with extra scissors. Please help.
@andresalz5
2 ай бұрын
Hey man, just remove the scissors closer, the whole part that houses the little part that makes the scissors close. You have three bolts there, that one that adjust the closer and the others which are facing toward the front of the machine, you r gonna identify one of them because has that spikey thing. Save that part with ur life if you wanna use ur machine in the cut pile style again
@tuftingeurope
Ай бұрын
So you have a loop element installed and you want to install your scissor? Is it a duo or perhaps a loop only machine?
@tommasomarchetti7671
Ай бұрын
Can you make a video with like high adjustment? Thanks 🎉
@aminabubauredi691
2 ай бұрын
Please I will like to find out if both the loop and the pile scissors is in the tufting machine the reason is my tufting machine package didn't come with extra scissors.please help.
@robinstrijd
4 ай бұрын
Ik zat dit te luisteren en besefte mij ineens dat je Nederlands bent :) dankjewel voor de instructie
@tuftingeurope
4 ай бұрын
oant moarn!
@nikolageorgiev6394
4 ай бұрын
I just got one of these and can’t figure out what type of yarn I should use. Like i get that wool is best but how thick should it be?
@nikolageorgiev6394
4 ай бұрын
And also why is the scissors not opening more? How do i change that cause it’s only cutting half the yarn and it gets tangled
@tuftingeurope
3 ай бұрын
Hey Niko, see our new video for the scissor opener. It is a quick fix!
@BenjaminRuggierouakanuff
6 ай бұрын
i want to buy one now straight , but there's none in stock
@tuftingeurope
3 ай бұрын
It is replaced by the AK-1N.
@misshassan100
6 ай бұрын
This is a perfect instructional video. Thank you.
@tuftingeurope
3 ай бұрын
Hope it helps! Did you already make a loop rug?
@judithriemer
7 ай бұрын
This is so very helpful, thanks a lot!
@tuftingeurope
7 ай бұрын
Happy to be of help!
@Carpet-Design
7 ай бұрын
I have the same gun, I love it!❤❤
@maieiz5202
6 ай бұрын
How to use it and whether there are defects with a gun or a carpet What are the defects that meet me and take the effort?
@maieiz5202
6 ай бұрын
How to use it and whether there are defects with a gun or a carpet What are the defects that meet me and take the effort?
@Carpet-Design
10 ай бұрын
✌️
@brandon1437
10 ай бұрын
.. or just use the one that it comes with?
@tuftingeurope
10 ай бұрын
It normally does not come with one. Your shop is adding it 😃
@nicolawake7787
Жыл бұрын
what should you do if you do this and then the scissors arent cutting?
@tuftingeurope
3 ай бұрын
Are they not opening or closing?
@cwlang
Жыл бұрын
I've tried everything in this video and my scissors is still not closing. This is extremely frustrating!
@m_iimi2833
2 жыл бұрын
how do we switch from cut to loop!!!!! ThANKS
@vanessagomez2968
2 жыл бұрын
Hi, in the description you wrote that it could tuft between 6 mm to 21 mm in height but I think you mean 12 mm
@tomyoung2065
2 жыл бұрын
Thanks for the video! One thing worth mentioning is that you may also need to adjust the scissor-opening mechanism, in this case by moving it back slightly away from the needle. If you don't do this, it may try to open the scissors too wide and cause them to rub excessively against the inside of the needle.
@skyleejeffrey6507
Жыл бұрын
I don’t understand but this seems like a great tip.
@engsneedlework9413
2 жыл бұрын
Just got the KRD-1 and the instruction videos didn't cover this at all. Thank you! You saved me from a nightmare!
@SamMadeThat
2 жыл бұрын
Thank you so much for a clear and concise video! Very helpful!
@irinawohl4478
2 жыл бұрын
Did that, thanx for showing, but now the yarn is super lose on the fabric. Even though I applied the same pressure, the backing is as tight on the frame as before. What went wrong? The scissor closes up front as shown.
@ggretism
2 жыл бұрын
is the green part of the gun made from metal or plastic?
@tuftingeurope
2 жыл бұрын
It's made of plastic.
@sennekevandewygaert1836
3 жыл бұрын
could you maybe do a video on how to change from cut to loop pile?
@tuftingeurope
3 жыл бұрын
Hi Senneke, we hope to publish a set of AK-1 video's next week. Any other topics you need covered?
@sennekevandewygaert1836
3 жыл бұрын
@@tuftingeurope Hi! I guess the basics like changing from cut to loop pile, from loop to cut pile and how to clean/take care of the gun! 😊
@sheilabond2927
2 жыл бұрын
Any chance of seeing that video of how to switch from cut to loop pile?
@GiovanniDogger
3 жыл бұрын
you're from europe. I want one but they're all US plugs. Will my machine break if I use a simple US to EU plug converter?
@tuftingeurope
3 жыл бұрын
The EU tufting guns (220v) and US (120v) both use the same china/us plug, so you always need a converter in the EU. We include this with every order.
@wmh9783
3 жыл бұрын
Im having a problem where my scissors dont cut , they only move in and out of the machine and it gives me a loop instead ... any idea how I could fix this ??
@tuftingeurope
3 жыл бұрын
1:36 shows the metal bar that you can adjust. When your scissor element hits that it closes and cuts.
@wmh9783
3 жыл бұрын
@@tuftingeurope right on thank you !
@Isaline
3 жыл бұрын
I'm ready for the AK-1 !!! 😎
@oliviapower6503
3 жыл бұрын
When will KRD1 BE BACK in stock please
@tuftingeurope
3 жыл бұрын
Sold out not too long ago. Expecting new stock in about 3-4 weeks. We will have the AK-1 around April 19th.
@oliviapower6503
3 жыл бұрын
Thank you. I've put my name down to be notified when in stock. Please reserve. Needs to be shipped to Ireland.
@zmzs9229
3 жыл бұрын
the krd 1 is both cut and loop right? like you can swap it out?
@tuftingeurope
3 жыл бұрын
It comes as cut pile out of the box, and with the tools to swap the scissor for the loop element. Video about it coming in a few days!
@tuftingeurope
3 жыл бұрын
Got any questions on the KRD-1? Just leave a comment!
@CustomKleed
3 жыл бұрын
Is the speed adjustable? If yes, can you make a video about it? I’ve ordered my KDR-1 and it should come in in a couple more weeks!
@tuftingeurope
3 жыл бұрын
@@CustomKleed the speed is adjustable via a dial next to the power-cable on the bottom. Just twist it left or right for faster, slower.
@CustomKleed
3 жыл бұрын
@@tuftingeurope thanks so much!
@kavazarigaming6921
2 жыл бұрын
My gun just rips through fabric and I’m not using cheap fabric. Can you help
@NelsonHillebrand
2 жыл бұрын
@@kavazarigaming6921 make sure the backing cloth is drum tight on your frame, keep enough pressure on the gun when tufting, and try two strings of yarn instead of one.
Пікірлер