got the same problem after doing a printhead clean i need a fix as well im gonna try buying refillable ink carts with reset chip change the printhead and try a flush failing the i will try a firmware update and if that doesnt work ill be buying new boards and sensors as they become available failing all that if it doesnt work will be a shed load of money down the pan im planning on converting to dtf and buying acrorip 11 hopefully that will let me run the printer and bypass the matte black if you get any help with a fix would be grateful to know how if you would share :) if i find a fix ill let you know gonna be a fair few months though as buying with very limited funds month by month the needed parts
@Elephat
Жыл бұрын
@@ZeroBudgetDevelopments hello I tried putting the original EPSON cartridge in with no luck, I put new chip twice with no luck. I got a board but have not installed yet as that need software has I was told.
@ZeroBudgetDevelopments
Жыл бұрын
@@Elephat I have the epson service software its obtainable off ebay I'm currently looking at the board but dont have the cash till middle of next month to purchase one I've found some boards abroad but they will cost me £257 plus import tax to get into the uk it's only because I cant buy a printer like this outright that I have to fix it step by step I was going to buy the refillable carts but have decided it pointless until I have a working mainboard I'm not sure if the service software is what's needed to replace a board but it say it's most likely the software unless their is a specific software for board changes I paid £25 for the service software unfortunately the guy sold me the wrong version 9890 and I didnt realise as I'm a novice to printing and printers I ran a printhead error fix which seemed to work without the software but after trying 3 cleaning cycles it flashed up this error from reading about it the service manual says it's an ink sensor error but looking at the transistor/fuse errors people are reporting I'm just just gonna throw what I can at the mainboard while I can get one might even buy a few as spares if this is a regular error I'm hoping to have all the parts needed to fix it bit by bit within a year hopefully buying one part per month if I get my disability payments granted again
@ZeroBudgetDevelopments
Жыл бұрын
@@Elephat my main aim is to get the old ink flushed ive bought a cheap refurbed head from china (not holding much hope on that but so long as i can flush it for storage im happy) cant flush until i can get the refillable ink carts with auto reset chip also from china and a new ink selector damper unit, im gonna throw as much as i can to get it going again hopefully im not flogging a dead horse and before anyone suggests i give up on it i cant its the most industrious thing ive got and my only hope of going pro dtf i cant save for shiznit and buying newer model out right just isnt possible on disability benefits im starving myself as it is to many hobbies not enough cash .
@RomyAure
Жыл бұрын
@@ZeroBudgetDevelopments inkowl for the cart and chips
@alfredogutierrez9541
2 жыл бұрын
Tengo el mismo problema pongo los 5 cartuchos de tinta y el sexto al ponerlo me sale x x x x x x en la pantalla que no detecta los cartuchos
@zekapipas5366
3 жыл бұрын
mine looked like this after I cleaned the print head
@nicolino.666
9 ай бұрын
pudiste arreglarlo?
@zekapipas5366
3 жыл бұрын
mine has this same defect. if you discover your problem tell me what was the defect please
@msabehyoussef855
3 жыл бұрын
I have the same problem, what is the solution?
@sathyanarayana3961
4 жыл бұрын
kzitem.info/news/bejne/o5xs0YN7rZmCpHo
@miltkallu8641
4 жыл бұрын
A probably solution Is in the mainboard. Find the F2 fuse in Main board with a multimiter and check if it have conectivity. If there Is no conectivity in the fuse F2 you can be sure that this Is the problem. To fix it You could change the fuse or made a bypass in it. If you do this please notice me if the problem get solved. Also Is probably that the headprint Is damage to. Thanks
@mmobarez1
4 жыл бұрын
You are right i have this error and it was the fuse in main board
@ThanhNguyen-mm9qr
Жыл бұрын
hi... i had the same problem when cleaning the printhead. i have checked all the fuses and they work fine. please give me a solution other than replacing the mainboard.... Thank...
@miltkallu8641
Жыл бұрын
@@ThanhNguyen-mm9qr check the transistor.
@ThanhNguyen-mm9qr
Жыл бұрын
@@miltkallu8641 Dear Sir... kzitem.info/news/bejne/xYKQ2ayYgoBlo3o The problem is definitely here. I'm not a pro but can I use direct leads to replace the Transistor?
@miltkallu8641
Жыл бұрын
@@ThanhNguyen-mm9qr this the fuse. Sorry my English is not very good, what do you mean with direct leads?
@alexventuree8100
4 жыл бұрын
same problem, after clean the print head, !!!, any solution
@ritabrata86
5 жыл бұрын
Has anyone found the solution?
@kvhlpham
6 жыл бұрын
How did you fix it? Thanks
@michealalynn5318
6 жыл бұрын
I’m curious as well, exactly the same problem. Did you find a solution?
@kvhlpham
6 жыл бұрын
did you fix it?
@nicolino.666
9 ай бұрын
pudiste arreglarlo?
@stuartcotterill9475
5 ай бұрын
@@nicolino.666needs a new motherboard
@nexxosstudio1080
6 жыл бұрын
hi, did you fix it?. I have exactly the same problem
Пікірлер