Do not recommend. I tried that, was a disaster. the metal bar bent. you need a mattress on top for even heavy weight to not destroy the bed.
@andreasmith4036
Жыл бұрын
Please record when child free
@cebanasdima
Жыл бұрын
You just need to push harder, together with someone from both sides, and it should work if the system is not deffect.
@ReuterL
Жыл бұрын
Do not recommend. I tried that, was a disaster. the metal bar bent. you need a mattress on top for even heavy weight to not destroy the bed.
@jodele25
2 жыл бұрын
Merci beaucoup, en effet il a fallut pousser fort la première fois
@DunePanda
2 жыл бұрын
the strutts are pre charged to counter the weight of the matters and the frame. so once you have it installed. you need to release the pressure just enough so it lets the mattress down. it will be at a float point so you can lift the mattress again with less effort.
@valentinnikolov793
2 жыл бұрын
Edgar Lorenzo, just to ask you the way the bed is, did you get any troubles with the frame bending due to lack of enough / sufficient support? Thank you!
@youtubemoderator9944
2 жыл бұрын
Thankyou so much for all the comments they helped me so much. I thought mine were broken but they wasnt. Thanks people xx
@whos_ted2556
3 жыл бұрын
you have to push hard that's what I did for mine and it worked perfectly hope this helps
@Simracer0
3 жыл бұрын
omg
@fais6964
3 жыл бұрын
I did read there is a device u can get to release some gas from the gas spring, as too much pressure in spring at moment. You Place the small device on top of the spring and press to Release gas. But a lot of comments below saying just put mattress on top then worked ...I’m not sure will be enough to just do that but I’ll try.
@artfte
3 жыл бұрын
3 weetabix in the morning !!!
@caroleburrell3040
4 жыл бұрын
Hi if you are having this problem with your bed, put the pistons on the bed have one person either side of the bed and push it down together in the middle of the bed, do this 2 or 3 times then you should be able to do it yourself from the bottom
@colinfan4277
4 жыл бұрын
We make gas spring more than 15 years . This video shows the bad quality gas spring
@robesco2945
4 жыл бұрын
How did you build the frame buddy I got the same problem too it's bull shit
@imeprezime363
4 жыл бұрын
Dude just push bed harder
@samiulrahman7467
4 жыл бұрын
I recently purchased this bed. Put it together myself. I thought I wasn't able to push it down thinking it would break but infact you need to put a bit of force into it and the bed will push down. After the first go itll be easier. If you dont pull up the bed after awhile the highdrollocks will get stiff so just be aware of that.
@AG-qo5fq
4 жыл бұрын
Thank you for the marvellous tip! Just go on top of mattress one at each side and at same time lay down! It worked for us! The Gas piston you put it in wrong way.
@GeorgeBonez
4 жыл бұрын
First of all calm down and stop panicking before you hyperventilate. You’re not pulling down hard enough to make the bed go down. You’re just jiggling it expecting it to somehow do all the work. It’s not a door on a cassette tape player ok. Be a man and pull that damn bed down hard and you will see how it works!
@emigem13
3 жыл бұрын
Lol, I've got the same bed as this man (purchased 6yrs ago) and I almost ripped the frame apart trying to get these gas lifts to work. I've still got the broken parts if you want to come and "fix it like a man" 😂 I spent 8hrs putting the whole bed together originally. 6 of those were spent taking these gas pieces on and off, back and forward, left and right, trying to figure them out. But yeah. If you give it a go and break my nearly $400 bed, you can pay for my new one.
@colinfan4277
5 жыл бұрын
This problem is mainly because the gas spring pressure is too large caused by, only need to exchange into a smaller pressure gas spring.Air spring pressure is recommended at 80kg. We mainly make bed lift mechanism more than ten years,we can solve all your problem for bed fitting .Our web www.danaier.com my whats app and we chat :+86 18032895310
@liangclara5799
5 жыл бұрын
You need to fix the gas struts on the bracket,then they can go down and up freely,the gas sturts' lift force is at least 60kg per piece,you really can't push it only by hands
@elijahsison4542
4 жыл бұрын
So if i have a 2 gas struts can lift 50kg each.so i need 100kgf to push it down?even i have 11kg load?
@smgaming162
5 жыл бұрын
I have the same problem I csnt push my bed town.. sitting on floor 😂😂😂 had to look for something and I cant lower the God damn bed.m 🤬
@smgaming162
5 жыл бұрын
Bro I no m to late but those who don't no yet.. grip on both side.. push down gently and it will be ok.. hahaha I just did that.. I was scared i might break it.. but dreams company show show to do it in KZitem.
@metratone5
5 жыл бұрын
Well I'm grateful for the video because now I def won't be purchasing. Hope you for a replacement that worked eventually.
@qnkomanolov2263
5 жыл бұрын
bro I had the same problem on my new bed the gas shocks won't fold by hand.You need to set them properly on the bed and then pull down.
@BeyondGloriaDeo
6 жыл бұрын
Does Hydrolic bed need some gas?
@cyho4559
6 жыл бұрын
I feel not comfortable to watch this video, kids should not be around, you not think of your kids safety🤕
@snugglepuzz007
6 жыл бұрын
Hi I had the same problem with my bed for ages and first you need to put the bigger end at the bottom then with the mattress on top you need to pull it down but have someone on the other corner pushing it down at the same time firmly and not to fast then it should just go. I tried many times to do this on my own and could never get it working by myself so I think when it’s pushed down it needs to be level in order to work 👍🏼 good luck
@auroragold799
6 жыл бұрын
It was sooo hard trying to get this bed down but all i did was put the mattress back on top of it told my 100 pound sister to lay on it went to the foot of the bed and pushed it down and it went down...it workd so perfect and easy
@tarsheenaames7082
7 жыл бұрын
kzitem.info/news/bejne/r6VpvWeZgWmfiYo
@Saria_89
7 жыл бұрын
Had same problem, you just need to pull down in the middle with force when the mattress already on the bed on an incline, it's meant to be hard so it doesn't fall on you when you're under there... It seems like it's gonna bend or break but I was reassured by a customer service rep at Tommy Swiss that it wouldn't, but if it did they'd replace it, as that would mean it was faulty he said. It worked :)
@spencerstorey8686
3 жыл бұрын
My hero
@adewunmiaderinsola3178
3 жыл бұрын
Oh my,I can't thank you enough had this problem just now,and it worked...God bless you!!!!!!!
@JonnyQ1354
3 жыл бұрын
Saria MVP
@amirahachache4183
3 жыл бұрын
Thank you soooo much 🙏🙏🙏 it worked 🎊
@AR-ou7rl
3 жыл бұрын
WTF thanks from germany its still works Thank you !! 😍
@TwinUziSam
7 жыл бұрын
Same you must make the bed and it must apply 50kg of force you can put your whole body weight or everthing built and mattress since air has low airpressure and mediom in tank you must apply the force of 50kg
@seghechannel177
7 жыл бұрын
I watched your movie and I have the same problem. What did you do at the end?
@loictuckey6106
7 жыл бұрын
brilliant.
@crazyaadil
7 жыл бұрын
Once the bed is fully assembled, push HARD with one person over each piston with a little momentum and it will move down
@AG-qo5fq
4 жыл бұрын
Thanks for the amazing tip.
@mingogaming338
3 жыл бұрын
I'm about to do it, it better work or I'm gonna loose my brother
@soundaryaramesh3926
7 жыл бұрын
Be sure to read crazysales.au review on my blog before you buy. Go to *keithreviews. com/crazysales-com-au-review/* Thanks. Blc Jeffery.
@hariroy9999
7 жыл бұрын
Be sure to read crazysales.au review on my blog before you buy. Go to *bradleyreviews. com/crazysales-com-au-review/* Thanks. Blc Ehud.
@hedahayden
8 жыл бұрын
We have same trouble, Eat pizza then push harder
@danielzhu1261
4 жыл бұрын
I bought three of them , had the same problem! It’s the stupidest design. I have to return to them( still waiting to be collected) . Don’t make a mistake to buy it!!!
@1993Revhead
8 жыл бұрын
Don't seek out to youtube mate, email the damn company themselves.
@Tomanart
8 жыл бұрын
I fitted gas supports with struts downward, then just lifted up and down like Umair said and it worked, thank you Umair
@DJBeckert
8 жыл бұрын
To anyone else struggling, see Umair Khans comments with instructions. This actually works! I thought my bed was faulty until I read the comment.
@sserddab
8 жыл бұрын
We bought one as well, rubbish, we got taken.
@TonyaPinkinsDivaDivu
8 жыл бұрын
Im having the same problem and IKEA customer service is USELESS
@umairkhan5157
8 жыл бұрын
Tonya Pinkins see my comment above.
@angiiedhars
4 жыл бұрын
@@umairkhan5157 Where is your comment? I have the same issue with the same bed here :(
@waynejones3413
8 жыл бұрын
use a ratchet strap to compress it to fit
@davidmathews8697
8 жыл бұрын
On duh fat sie of the gas struh on duh top of duh base should be an Arren key socket. Put duh arren key an open it an crose it quick. Keep doing until you be able to bring it down. Easy.
@elec3xn8tw0rx9
8 жыл бұрын
Try to have a look or locate a small hex screw on the strut or cylinder,, use a hex key and rotate to adjust(bleed out) the pressure inside the cylinder, a noticeable small amount of oil will burst out, repeat the process until the cylinder smoothly reciprocate.
@deniseadams1707
8 жыл бұрын
I have same issue also the hydraulics are bent so I cant even fit them, cheers Groupon !
@umairkhan5157
8 жыл бұрын
I was having the same issue and here is what you want to do; 1) Assemble the bed according to the guide which is given and assemble the struts as you normally would. 2) once finished assembling Place the mattress on top of the mattress support frame while its upwards/Tilt. 3) After putting the mattress wait for 15-30 min. then Push the frame up really hard and pull it down again HARD (don't worry it won't break) keep repeating it until the struts are down. Note: the struts has gas trapped inside so it needs some sort of HEAVY and even weight on them. Hope it helped :)
@zedits1307
8 жыл бұрын
UMAIR KHAN thank you!
@umairkhan5157
8 жыл бұрын
Zainub Khan my pleasure
@tjnadah
7 жыл бұрын
dude struggled with this for 3 years!! quick search today and see this and has totally sorted it thanks so much I love this global village! best wishes
@robertthompson3741
7 жыл бұрын
Yeessss. Thank you!
@audreymles
6 жыл бұрын
UMAIR KHAN THANK YOU SOOOOO MUCHHHH!!!!!!!!!
@JudyNunya
8 жыл бұрын
is it upside down?
@tarikkarabay8777
8 жыл бұрын
Actually he mounted them the correct way, this way the oil inside will lubricate the inside parts and the struts will have a long life.
@ryanhosier8785
8 жыл бұрын
I have same problem
@coralinian
4 жыл бұрын
Ryan Hosier I have also the same, what did you do?
@tre6251
8 жыл бұрын
The problem is the inverted hydraulic piece. Minor set back.
Пікірлер