You are a lifesaver! You had the only video that I could find to get my 2012 Highlander apart! My daughter spilled a slushy down into my gear console and I needed to take it apart to clean it , since I could no longer shift!! Now I also know how to change that lightbulb!! Thank you!
@roberttoews2775
Ай бұрын
Thanks. Helped me out. 😊
@tomstevens3821
Ай бұрын
in case anybody's interested, I was able to find the bulb at AutoZone. It is Made by Sylvania and is number 2721. They are much smaller than side marker bulbs. Maybe twice as thick as a pencil lead.
@tomstevens3821
2 ай бұрын
you did a really good job explaining everything clearly. Now I'm not afraid to do it myself. Thanks!
@РоманИванов-л1ш
3 ай бұрын
Здравствуйте а левый фонарь,чтобы снять говорят нужно снимать бампер,привет из России 🤝
@afskinner
3 ай бұрын
I watched 5 or 6 videos before I found yours. None of them showed how to get it off or weren't the right year! This was so easy! I changed the right tail light on my 2013 highlander in about 30 minutes! Thank you thank you! Very very helpful video!
@hankmarz708
4 ай бұрын
Buy a swivel socket attachment around $5, you can do everything from access panel that you change your bulbs with. I did it with my 2013 Highlander.
@kleigster675
4 ай бұрын
Worked for my 2013. Thank you for posting.
@kathyguido3724
5 ай бұрын
This may be the clearest how-to video I have ever found on KZitem. I tried using the access port first, but the adjustable socket I borrowed wouldn't fit, so I followed your instructions for opening up the inside of my 2013 Highlander to reach the bolts. It was a pain, but it worked and didn't even take all that long. Thanks!
@BrettBeaty
5 ай бұрын
Your directions were spot on. Thank you.
@lesliejones7609
6 ай бұрын
Thank you so much!!!!!!!
@bmjackson81
7 ай бұрын
I was able to remove the taillight fine, but I'm having trouble getting the new light assembly to 'click' into the yellow post on the side of the car. It looks like everything is lining up correctly, but I'm either not able to push the taillight far enough in for it to click OR maybe the sizing is off between the yellow post and the catch on the taillight I got. Any advice? I'm just about ready to screw back in the nuts and call it good. I'm afraid I'm going to break the light assembly if I push hard too many more times.
@YT_Monke
7 ай бұрын
Thanks jasper, great instructions 👍
@ugatreydawg
8 ай бұрын
Fantastic video buddy you really helped me so much I can’t thank you enough I really appreciate it. Thank you and you did a great job man. I don’t know how you did all that with the camera bro this thing is driving me crazy but I got it.
@roem.9484
8 ай бұрын
Thanks for making this video, I had to use a stubby socket wrench to reach the top bolt but it worked. Also the part I ordered only had the enter bulb and the other two bulbs were not included in the assembly!
@TA-op3vn
8 ай бұрын
Straight to the point, thank you
@whoispradeep
10 ай бұрын
How did you shift the gear down? Do you need to put the ignition on position?
@nathantyson3982
11 ай бұрын
It’s that last bolt you mentioned I can’t find 😬
@2002southzone
Жыл бұрын
I was having an issue getting my sausage fingers into the small opening to change the tail light bulb. I found this video extremely helpful!!!! I was able to complete the job in about 15 minutes. Without the video, I'd still be working to find the screws and bolts. Thanks for sharing this video.
@JRESHOW
Жыл бұрын
Ridiculous all the work to change a bulb
@johnbernitz4754
Жыл бұрын
will this work for a 2012 highlander?
@jasperliu
Жыл бұрын
Should be virtually identical for 2008-2013 Highlanders.
@deecee4410
Жыл бұрын
Thanks for the tip. Hahaha...I had overfilled coins jammed inside the center cup holder meanwhile the lid didnt close properly. So I had to pry open panel to disclose all the coins stuck inside
@crlaw75
Жыл бұрын
Wow...talk about dumb engineering.
@alicedowns9284
Жыл бұрын
Thank you, because of your good instructions my husband and I were able to replace both of our broken tail light assembly. It took us about 3.5 hours to do both, but we are senior citizens. You saved us big bucks! Thank you again!
@maries3499
Жыл бұрын
Totally Awesome! Got it all apart, but still struggling to get the accessory charging plug out!!! Ahhh!!!
@MMOchAForPrez
Жыл бұрын
Video sucks get to the fucking point
@ThreeBooleans
Жыл бұрын
Thank you i used your guidance to open up underneath my shifter and find my micro sd card that fell when i was trying to put it in the camera
@AJCsr
Жыл бұрын
I find it un-fu king believable how convoluted cars are to work on these days ! It used to be un-screw a couple scerws and change fixture/light bulbs. I spent an hour yesterday trying to change a damned brake light ! The guy at the auto parts store told me on a ford fusion you have to remove the front bumper to change a fuggin headlight . 💩
@andrewpeterson5921
Жыл бұрын
Terrific video, so glad I watched before attempting this changeout. (‘13 hi lander) Could not have done it without you. Especially appreciated the guidance finding the top screw! Didn’t lose either nut but glad I had a magnet in reach. Helped to have a friend hold the panels out of the way. (I’d recommend buying a $15 set of pullers - they’re difference makers.)Now I can get my car inspected! Thank you!!!
@RobRamirez456
Жыл бұрын
Where can I find that bulb I went to different stores and couldn’t find it
@jasperliu
Жыл бұрын
The local Toyota dealer had one, but if you can't find it locally looks like you can order it from: parts.toyota.com/p/Toyota__/BULB-HEATER-BLOWER-SWITCH-POSITION-INDICATOR-LAMP/63388027/9098111040.html
@jimbo12
Жыл бұрын
I just changed the light in my 2013 Highlander. Thanks very much for your help it was spot on!
@fasteddie617
Жыл бұрын
Do you need a swivel, or just a long ratchet extension suffice? Thanks for helping.
@nemobushstatue5111
Жыл бұрын
Through a bunch of screaming, crying, scratching, and this video I successfully replaced my back light. I’m never doing this again and just using flex glue clear the next time it breaks.
@NerdBryant64
Жыл бұрын
Thanks, it took me 1hr 24 minutes. Now I just have to wait for the one on the other side to come in and fix my bumper, it cracked in half at the center.
@jerrybayless7677
Жыл бұрын
I thought this video was great, but I wanted to try to do this on my 2012 Highlander without taking off all the paneling. So I was able to do it all through the small access panel. I changed the left tail light (driver's side) by drilling a 7/16" dia hole on the edge of the access panel cutout so that the lower nut could be removed straight out with a standard 10mm deep socket. The top nut can be loosened with the same socket and removed by hand. Make sure to have a bag of 10mm nuts on hand, because I lost a few of them during the installation. The top nut is tricky to align with just your fingertips. You can practice doing this on the old unit after it is removed. One issue that I encountered is that my aftermarket tail light ($75.99 on Amazon) needed the light socket holes filed a little larger so that the old light receptacles would fit. In one case, the light bulb wouldn't even fit through the hole. But I did it on the kitchen table where it was easy to do with both units in front of me. I suspect that these aftermarket units are just rejects that are made from Toyota's normal supplier, but that didn't meet Toyota's quality standards and ended up on the surplus market. But it was a minor inconvenience compared to buying the part at a Toyota "stealership".
@danielcanada9370
Жыл бұрын
and it really did, easy if you follow the instruccions. i fixed my aux input and seat heat controls.
@danielcanada9370
Жыл бұрын
this video is going to save me a lot of $$$. thanks
@brendonla
Жыл бұрын
Great video - thanks!
@carmanshawne685
Жыл бұрын
Thanks my dealer wanted $85.00 to replace 1 brake lite bulb. I used a longnose right angle pliers to do both bulbs..Used LED bulbs. Next time I will replace others in warmer weather.
@davidmajor8219
Жыл бұрын
One added point, you failed to say that you need size 4 hands. Mine are 12~!
@whoispradeep
Жыл бұрын
Has 2008 highlander also this light?
@darinkalashian8005
Жыл бұрын
Jasper, i owe you a beer if you are ever in the boston area! Thanks, you made quick work of it..
@wangandrew607
Жыл бұрын
Thank you so much. I searched online for the Highlander 2012 driver side tail light assembly replacement. This one does help me even if it is for other side. Your explanation and video are just good enough.
@richardcooper9068
2 жыл бұрын
I live in town but didn't realize this was here. Now I need to buy camping gear 😅
@10joma10
2 жыл бұрын
Great video! Thank u very much. 😀
@brunoreis6331
2 жыл бұрын
Thanks for an awesome review, appreciate it!
@hopemoore4876
2 жыл бұрын
Thank you sir! My 17 year old daughter was able to purchase and replace her busted tail light using your video. Saved her a fortune.
@annkennedy8370
2 жыл бұрын
Hello to everyone who wants to try/do this. I am a 67-year-old grandmother and as my granddaughter is always stating -- "Grandma can fix just about anything". I recently backed up into a post that broke my rear passenger taillight housing. I decided to go to you tube and see what it would take for me to replace the light housing. I found this video and it was so helpful. I was able to do this myself and it only took me 90 minutes to complete the task. I have small hands and immediately decided that it was going to be much easier to take the long road on this. My hands barely fit into the access port, so I took the housing around the area apart, like he did, and it was not hard to swap out the broken for the new. Thank you for the video.
@derekholt715
2 жыл бұрын
I hit a tree backing out of my driveway how about y’all
@jerrybayless7677
Жыл бұрын
I smashed the left Highlander taillight as I was backing my Corolla out of the driveway. I destroyed the right Corolla side mirror in the process. Felt like an idiot. Fortunately, no sheet metal body damage on either car. I only destroyed the replaceable plastic parts.
Пікірлер