My home was built in the early 1970s. I have some slatted wood shutters that I'd like to strip. Is this the best method to strip the paint off these old shutters so that they can be repainted?
@northriverbuildersinc908
5 сағат бұрын
It’s doable, but it’s very labor intensive to do shutters. If you decide to do it with infrared, the best tool will be the Cobra IR unit, which is made for small, detailed work. You may want to consider having them dipped instead, if there is a facility that does that near you. In the Boston area we have a salvage company that buys salvaged architectural materials from antique buildings and offers that service. Keep in mind that they still will require a good deal of prep before they’re ready for painting. The dipping process raises the wood grain,so they’ll need to be sanded. Either way, good luck with the project!
@jpt8011
Ай бұрын
@northriverbuildersinc908 Great video, very much appreciated. I am picking up my hinges etc today. Do you have any recommendations on spraying the actual hinges. Or just spray them like the other parts? I only ask because they will be moving a lot. In the video I noticed you painted the inside of the tracks black as well. Looks sharp! Did you only use painters tape at the bottom of the inside of the track? (Where the roller will be in contact) Thanks!
@northriverbuildersinc908
28 күн бұрын
Thanks for the note - sorry I couldn’t answer sooner. You may have painted already, but I’ll respond anyway… No special treatment for the hinges. Unless they are disassembled (which can’t be easily done with most hinges), the moving parts are protected from the spray paint. Yes, I only masked off the bottom inside areas of the tracks where the wheels will touch. Probably not even necessary, but I erred on the side of caution Good luck with your project!
@leekazan556
Ай бұрын
Now I know what to do with that infrared bathroom heater that I took out a while ago and have sitting in the garage!! Thank you!!
@northriverbuildersinc908
Ай бұрын
Good luck !)
@juanitarogers5146
3 ай бұрын
Great to see how effective IR is. And I agree 100% with your reasons for stripping and re-painting, rather than ripping off and replacing. You just can't buy decent old pine unless from a recycling yard, and it beats modern pine hands down for longevity - if you keep sources of damp at bay. Great job on the weather boarding.
@northriverbuildersinc908
3 ай бұрын
Thanks for watching, and I appreciate your comments
@user-ep9ht7ok6q
3 ай бұрын
I have an old house that I'd like to strip the paint off of and then stain the wood. Have you ever gone from painted wood to stained wood as opposed to painting over it again?
@northriverbuildersinc908
3 ай бұрын
I’m assuming you’re talking about ending up with a natural wood look (rather than an opaque house stain that looks like paint). We haven’t done that on a whole house exterior, but we’ve stripped paint from exposed timbers and not repainted them. Note: once the yellow house in the video was completely stripped of paint, several people commented that it looked so good that maybe we should skip the paint and just clear coat it! They were only half serious, but in any case it would be very difficult to get every bit of paint out of the thousands of tiny cracks and crevices of a house exterior, and that’s exactly what you’d have to do to transform a formerly painted house to a natural wood siding house.
@hokimocus
3 ай бұрын
I removed very hard paint from my 1940s cottage. I used linseed oil to soften the paint( southern exposure). It was a slow process as the time it took to soften the paint for scraping, was much longer. I completed it and the results are beautiful. P.S. What scraper is the gentlemen using in the video? Thanks!
@northriverbuildersinc908
3 ай бұрын
Congratulations on your successful paint removal! Sounds like it was worth the time and effort. One source of professional grade scraping tools in Atlas Preservation Inc.
@hokimocus
3 ай бұрын
@@northriverbuildersinc908 Thanks for the response!
@thehonestman26
4 ай бұрын
The idea of doing this just came to mind a few minutes ago and was wondering if anyone else had done it. I'm really surprised I was only the 10th like. Good informative video that you explained very well. The video deserves a lot more likes. I just think it hasn't occurred to enough people to look into. Thanks for the info.
@northriverbuildersinc908
4 ай бұрын
Thank you so much for taking the time to post a comment, and I appreciate the like! Yes, this video hasn’t been all that popular… I guess you, me, and just a handful of others will be the only ones with painted garage door hardware!
@roysandi7126
4 ай бұрын
I'm going to work on a house with paint just like that. How much can I charge per square foot?
@northriverbuildersinc908
4 ай бұрын
Square footage pricing doesn’t work due to the many variables, including labor rates for your area, the number of layers of paint, and the ratio of irregular trim (mouldings, etc) vs siding. Your best bet is to price the job based on the total estimated labor hours. If you’ve never done this type of work before, tell your customer you need do a test area to determine the price, then carefully track your time. Don’t forget to include time for light sanding prior to painting.
@homeshield5863
4 ай бұрын
Dose this work on brick 🧱 cheers
@northriverbuildersinc908
4 ай бұрын
It should, but only if the bottom most layers of paint are old linseed oil based paint (if the bricks were first painted after 1950, there’s a very good chance it’s not linseed oil based)
@katerynamease6450
4 ай бұрын
Does it worth to use this method on the house from 1950 ies? Thank you!!!
@northriverbuildersinc908
4 ай бұрын
The method works best with linseed oil based paint. Although linseed oil paint was still being used into the 1950s, it was being replaced with other formulations around then, so no guarantees. It’s safe to say that any house built before 1920 likely has linseed oil paint (at least the lower layers). Infrared stripping works if the lower layers are linseed oil paint, even if it was painted over with something else later on
@katerynamease6450
4 ай бұрын
@@northriverbuildersinc908 thank you for replying!!! So, old fashioned scraper for my house is best option? 🤣🤣🤣
@crystalholtzclaw3853
6 ай бұрын
I want to paint the inside of my garage door black. Can I just spray paint the hardware while it is on the door? Or should I take everything apart?
@northriverbuildersinc908
6 ай бұрын
If the doors and hardware are going to be the same color, you should be fine leaving it all together. If not, you’ll have to decide which is more work - masking around all of the hardware or disassembling everything.
@nathanmciver6496
9 ай бұрын
Awesome video! Money and cheap tac just dosen't make life worth living! Nice to see somthing worth watching!
@northriverbuildersinc908
8 ай бұрын
Thanks for watching!
@edazziz5627
9 ай бұрын
Interesting
@northriverbuildersinc908
3 ай бұрын
Thanks for commenting!
@darkmauveshore
11 ай бұрын
Would you say it looks more black or more bronze? Kind of hard to tell but looks great.
@northriverbuildersinc908
11 ай бұрын
Good question… but not easy to answer. The color depth and tone you’ll end up with is determined by the type of brass as well as the length of time it’s been exposed to the solution. Some types of brass will end up lighter and others darker, and also either warmer or cooler in tone, but despite those variations, I guess I’d never really describe the final color as black. By the way, the reason we finished the hardware in the video with a brown-tinted wax is because when it came out of the solution, the color was a bit cooler than we expected. The brown wax gave us the color correction we wanted. We’ve done different hardware with the exact same process and it’s come out with a warmer, more bronzy hue. When that happens, we use clear wax for the final step
@jenniferlynn3537
Жыл бұрын
This is just so tremendously helpful - and encouraging! Every question and concern I had has been addressed in your answers to the comments - you guys are the best! Many months ago I came across a photo containing a Japanese bronze vase that I fell in love with, but couldn’t find anything resembling it. Moreover, the prices for solid bronze vessels are daunting. I did note that the antique/vintage market is flooded with old brass items which can be acquired for a song - and now I see with a bit of effort, they can be transformed into modern looking, high-end treasures. My brass vase is on its way as we speak. Thank you, thank you, thank you!!! 😊
@northriverbuildersinc908
Жыл бұрын
Glad you found it helpful! Good luck with your project- and let us know how it goes! :)
@user-mi4nd3ty5d
Жыл бұрын
Thank you for this video :) Do you recommend any infra-red machines? Thanks!
@northriverbuildersinc908
Жыл бұрын
I recommend the Speedheater 1100 for larger areas (siding) and the Speedheater cobra for detail work (moulding, window trim, etc). Both are available online through Eco-Strip. Note: there are other manufacturers that sell knock off units that looks similar for half the price, but they’re not as well made and tend to fail.
@user-mi4nd3ty5d
Жыл бұрын
@@northriverbuildersinc908 thank you!
@jeffjames1567
2 ай бұрын
I used the COBRA for a lead remediation project at my house. It worked great. Not a cheap machine, but worth every penny.
@vanhala7
Жыл бұрын
After you strip the siding and repaint, how long before it starts too look like it did before? Or is it only lead based paint that will chip and peel like that? Thanks!
@northriverbuildersinc908
Жыл бұрын
The high performance primers and paints available today outperform the old lead-based paints for sure, but since the primary cause of paint peeling is moisture getting behind it, I think removing all of the cracked and chipped paint went a long way towards preventing water intrusion, and in turn, peeling. The paint job in the video was done 5 years ago and is still solid. We used top of the line Benjamin Moore primer and paint. We also re-roofed the building prior to painting it, so that’s leak- free as well.
@vanhala7
Жыл бұрын
@@northriverbuildersinc908 Thanks!
@jeremystone56
Жыл бұрын
What is the electric cost to use infrared associated with a building that size?
@northriverbuildersinc908
Жыл бұрын
Good question… I didn’t track the cost, but I can say that the IR stripping portion took approximately 300 man hrs . you might be able to get the power consumption specs for that IR unit and calculate the cost from there.
@stepandrailco
Жыл бұрын
Great video, used the same Jax products and dipped the part, which gave it an even color however your parts are a couple shades darker. Any advice on getting a darker finish?
@northriverbuildersinc908
Жыл бұрын
There are a few reasons I can think of that might cause this to happen… 1. The most common is that the darkening agent has gotten diluted or was weakened by use (it loses its effectiveness with exposure to brass) 2. The surface was contaminated somehow. In the past I did this same ORB treatment on a pair of outdoor brass handrails. One came out out a little lighter (and slightly more blue) than the other. I don’t know what happened, but I buffed it down to raw brass and treated it again with a fresh batch of darkening agent. The second time came out much better. 3. Brass is made by combining copper and zinc, and it’s possible that yours has slightly different proportions of those metals. If this is the case, there might not be much you can do… however, if you haven’t waxed the parts, you can deepen the color by using a dark-tinted Briwax like the one I used in the video
@stepandrailco
Жыл бұрын
@@northriverbuildersinc908 Thank you! I also ordered the Sur Fin product you recommended to see if their product will give a darker shade. If we use wax, will the finish still come off eventually? My client wants it to remove over time from use.
@northriverbuildersinc908
Жыл бұрын
@@stepandrailco yes, if you use wax the finish will still wear off over time, naturally revealing the brass at the wear points
@stepandrailco
Жыл бұрын
@@northriverbuildersinc908 Appreciate the replies
@hannahswann747
Жыл бұрын
Goodness, I never knew about infrared paint removal! Thanks so, SO much xox
@northriverbuildersinc908
Жыл бұрын
You are so welcome! Thanks for writing!
@chubbyrain3
Жыл бұрын
Thank you! I was looking for a solution for stripping lead paint on our old house built in 1882. I appreciate you posting about this.
@northriverbuildersinc908
Жыл бұрын
Thanks for your feedback, and best of luck with your project! It’s a lot of work, but so worth it!
@Rockpire
Жыл бұрын
Can I do this on my zippo lighter?
@northriverbuildersinc908
Жыл бұрын
If it’s solid brass, have at it :)
@thaddsnyder
Жыл бұрын
Any concerns of fire due to the heat?
@northriverbuildersinc908
Жыл бұрын
Not any reasonable concerns. Infrared operating temps are low enough not to ignite wood through normal usage. You’d have to leave the unit on and not move it for many hours to generate enough heat to cause wood to ignite. A standard heat gun, on the other hand, is hot enough to ignite wood, and there have been cases where removing paint with a standard heat gun has resulted in a house fire.
@rzalez2
Жыл бұрын
Nice video. You good
@northriverbuildersinc908
Жыл бұрын
Thanks Roberto!
@rzalez2
Жыл бұрын
Nice video. You good
@northriverbuildersinc908
Жыл бұрын
:)
@moonflowervibe
Жыл бұрын
What kind of sanding pad did you use? Do you not "scratch" it too much? Thanks
@northriverbuildersinc908
Жыл бұрын
We used 3M synthetic hand sanding pads, “very fine” grade. We’ve also used medium grade with success. The synthetic pads are quite forgiving and can be controlled by applying more or less pressure.
@-o-The-Duke-o-
Жыл бұрын
I missed the oil rubbing part.
@northriverbuildersinc908
Жыл бұрын
You’re right… and no bronze either! I’m not sure how the door hardware industry came up with that name, but who am I to judge? ;) Anyway, it should give you some comfort to know that waxes and oils are closely related (they are both lipids, but in solid and liquid forms, respectively), so I suppose the wax-rubbing step could qualify!
@learner-long-life
Жыл бұрын
Beautiful restoration, and great explanation. Thank you. I have the same kind of flaking exterior paint on my house, and I think the IR paint stripper would do a better job than applying chemicals + heat gun, or even a steam cleaner. The siding you showed is straight and flat, my main concern is if the IR paint stripper would work on all the ridges and small edges of a window frame and sash.
@northriverbuildersinc908
Жыл бұрын
Hi Paul - thank you for taking the time to write, and also for the positive feedback. The paint crew also used a much smaller IR tool called a Cobra for the detailed trim. The Cobra is held in one hand, and a contoured scraping tool is held in the other. Both are available from www.eco-strip.com/product/speedheater-cobra/
@debsandz
2 жыл бұрын
Thanks so much for posting this! This is so helpful. I have a question though, what type of lacquer you would use to protect ?Spray or brush on? Thanks
@northriverbuildersinc908
2 жыл бұрын
Glad you found the video helpful! If you choose to use lacquer instead of wax, I’d recommend using spray-on in a matte or flat finish. These sheens are less common than gloss or satin so your local paint store is less likely to have them in stock, but you can find them online. Good luck with your project!
@debsandz
2 жыл бұрын
Thanks, I appreciate your help!
@zacharycarter9341
2 жыл бұрын
I'm considering doing this to my Henry 45-70 Reciever.... any reason I shouldn't? Or is it g2g?
@northriverbuildersinc908
2 жыл бұрын
If it’s solid brass it should work. I think it would look cool, but one reason not to do it would be that future scratches from use would be a lot more visible. If that would bother you, I’d suggest leaving it as-is
@eco-strip1312
2 жыл бұрын
Good video showing benefits & results. Folks need to make sure their tool is UL listed & safe.
@northriverbuildersinc908
2 жыл бұрын
Yes, that’s an Important point
@petercarlsen3462
2 жыл бұрын
I have had dusting/flaking issues when I use my speed heater, have you ever ran into that before? I was told boiled linseed oil can act as a softener to possibly reduce that? Off topic, but what’s the main field color of that house shown?
@northriverbuildersinc908
2 жыл бұрын
Yes, I have heard of brushing on linseed oil to soften old paint and aid removal - and although I haven’t experimented with it myself, it makes sense that it would reduce the dust/flaking issues that you describe The siding color is Ben Moore HC-8
@petercarlsen3462
2 жыл бұрын
@@northriverbuildersinc908 thanks for reply 👍🏼
@markcampbell4352
2 жыл бұрын
I followed your instructions including the wax and I got amazing results. I couldn't be more pleased! My old beat up, shiny solid brass hardware is now beautiful, even oiled bronze! Saved over a thousand dollars in not having to replace great old hardware!
@northriverbuildersinc908
2 жыл бұрын
That’s great to hear, Mark! I really appreciate your taking the time to share your experience.
@lisajaneZ
3 жыл бұрын
That is amazing! Thanks for an easy to follow step by step process. Can't wait to try this out!
@northriverbuildersinc908
3 жыл бұрын
Thanks for commenting, and best of luck with your project - let us how it turns out!
@lisajaneZ
3 жыл бұрын
What a gorgeous project and result! Thank you for preserving the old wood and it's historic value. I live in a historic neighborhood and appreciate the information. Does your company offer this service?
@northriverbuildersinc908
3 жыл бұрын
Thank you for the positive feedback! Yes, we offer complete antique home restoration services. You can find more info online at www.northriverbuilders.com
Пікірлер