Is that plusivo soldering kit what you used in this video? I think I’ll get that. My Speedo/resonator has gotten so bad it just crapped out even when it’s not hot this morning so I guess it’s taken its toll so I have to do it now lmao
@jeffharrell1874
Күн бұрын
@@a-10warthog90 yes. That’s the kit I used. But other kits will work fine as well.
@a-10warthog90
Күн бұрын
@@jeffharrell1874oh and is disconnecting the battery mandatory?
@jeffharrell1874
Күн бұрын
@@a-10warthog90 it’s always wise to disconnect the battery before working on any electrical components within the car
@dannyle2897
4 күн бұрын
Thank you for the clear and concise video. Help me a ton!
@gekisoscion
Ай бұрын
I found this video a couple years ago when having this issue with my JDM Camry Gracia and couldnt find the issue with all sensors sending and reading properly, so I got the resonator and all to do this repair, but never bothered to replace it because I'm lazy. It finally conked fully out this week, just replaced that resonator and BOOM everything is perfect again. You are a godsend with this video my man, if it wasn't for this, I'd probably still be losing my mind trying to find out what's wrong.
@alanmichaelclarosescobar4223
Ай бұрын
Where do I get ur book for the Toyota I’m trying to get one for the 1997 hilux surf
@jeffharrell1874
Ай бұрын
I bought a Haynes repair manual I found on eBay used. I believe Haynes only published vehicles for the US. You might find the info you need from a Haynes 1997 4-Runner manual.
@johnnydarko1983
Ай бұрын
Had all three issues, emphasis on "had" but not any more thanks for the video. Mine is a 1997 Toyota Camry XLE 2.2L for reference.
@elecmuso
Ай бұрын
Hi Jeff. Any idea whether this solution works for a 2004 Lexus GX470? There seems to be a common scenario for that vehicle where the speedometer is stuck at 0 but the odometer continues to function (and thankfully the transmission shifting also behaves itself) which is of course different to the 3 symptoms you've described. I'd give it a try only I have to order the part first and without having taken out the cluster yet I can't site the component to make sure it is the same value - so I guess my first question is do you know if the component is the same for that model vehicle? Or anyone able to direct me to a circuit diagram (or photo even) for the GX470 speedo itself?
@jeffharrell1874
Ай бұрын
You might have a speed sensor issue. I don’t think your root cause is the same as in this video.
@AngelOliva302
Ай бұрын
I was able to fix it on my 1998 Toyota Camry thanks to your Instructions - I'm driving proud now and the chicks dig my car!...Lol - Thanks!
@davidn9149
2 ай бұрын
After 2 speed sensors and checking for loose fuses I jumped on KZitem to find this and similar videos. Thanks Question? Soldering the blue ceramic resistor on the opposite side? Does that interfere with assembly? Seems it could.
@jeffharrell1874
2 ай бұрын
It does not, and it makes it so much easier. Good luck!
@mariomezajr.8398
2 ай бұрын
My speedometer works good, but my odometer doesn’t show all numbers, if my tundra has 123,467 miles it shows 1 3,46 incomplete does this fix this issue ? I don’t want to buy a new cluster just for that
@jeffharrell1874
2 ай бұрын
I’m not sure if this helps in your case.
@mirceatudorache8091
2 ай бұрын
Amazing video, appreciate a lot!
@alexrcroes
3 ай бұрын
Worked!! Thank you for the easy fix!
@MichaelPittmanJr.
3 ай бұрын
Can the place be put onto the front, replacing the old one?
@jeffharrell1874
3 ай бұрын
After removing the bad capacitor, the new one can be installed on either side of the electronic board. But it’s much easier to install through the back.
@farazsiddiqui6689
4 ай бұрын
I just replaced the instrument cluster on my 4Runner since the last had a broken screen. Everything seems good except the odometer is blank. Trip A and Trip B both work. Any ideas? TIA.
@jeffharrell1874
4 ай бұрын
If your speedometer is still working, this may be a different issue within the instrument cluster. I’m not sure what that would be.
@blap9467
4 ай бұрын
How do you put the tube seals in?
@jeffharrell1874
4 ай бұрын
There’s multiple ways, depending on what tools you have available. It’s possible to use just a hammer or mallet alone to lightly tap them in. I’ve heard of people using a socket or pvc piece of the same diameter of the seals to help evenly apply force on the seal to help it fully seat in place. If I remember correctly, I think I only used a small hammer to carefully tap all around the seal. It’s not the easiest method, but it’s better than hammering against a flat head screw driver which could slip out of place and cut through your seal. I made that mistake and had to buy another set of tube seals lol.
@BimmerFordDude
5 ай бұрын
This is by far the best video for this job! Pain in the butt process and solidifies my hate for front wheel drive cars. So much easier on a RWD car! 😡
@damacknificent151
5 ай бұрын
Nine didn't blink fast or anything. It kept giving me code 33 on my 1997 toyota 4runner any other way to clear it?
@jeffharrell1874
5 ай бұрын
Have you already changed the abs/speed sensor for that wheel?
@damacknificent151
5 ай бұрын
@@jeffharrell1874 yes
@jeffharrell1874
5 ай бұрын
@@damacknificent151 it’s possible that some variation of the number of brake pedal presses may help clear the code if the part swap was a success. If that doesn’t work, then it may be necessary to use a special scan tool that can recognize Toyota abs codes, or further diagnosis from a mechanic.
@jamesguralski5156
6 ай бұрын
Yes this worked! I changed my front driver's side cv shaft and hub and bearing! It ended up being just metal fillings on abs wheel speed sensor! Just clean it up ... Did your rest method. Vala
@joecagle9085
6 ай бұрын
Where did you get the resonator? Never did hear you give the site to get it.
@jeffharrell1874
6 ай бұрын
Look in the video description. You’ll find some links.
@lightshine6044
7 ай бұрын
Does this method work for 97 toyota camry 4 cylinder? or does it have to be 6 cylinder?
@jeffharrell1874
7 ай бұрын
I believe it should work either way
@Tbonner0818
7 ай бұрын
Awesome..Thanks! Found a new hatch handle on Amazon for $12.
@BG-xh5rb
7 ай бұрын
It's a good video without all the fanfare, bells, and whistles. No excessive rambling or camera jerking. Thanks for the fix!
@user-gw1gz9nt2l
7 ай бұрын
What is the link to get the part if u will can u send it to me
@jeffharrell1874
7 ай бұрын
There should several link options in the video description.
@bigdogkropp
7 ай бұрын
Be prepared for the outer cover clips to break. You can buy an assortment of different size clips online for cheap.
@khengratha3264
7 ай бұрын
Thank for sharing! Is it possible for you to share toyota camry third gen. problem?
@guitarshred863
8 ай бұрын
Hello , Jeff , thank you for responding. basically . I was changing a sparkplug of a V 6 Rx 300 0f '01. the sleeve of sparkplug at the back ,broke off where the hard palstic , about 1/2 inch. I have the sparkplug out . I did everything possible to pull it out . after lubricaring with silicon , it doesn't even turn . I was thinking of drilling it to pieces, and after that , vacuum inside . will it work? Thanks.
@jeffharrell1874
8 ай бұрын
It’s hard for me to picture what you have going on. I would get a knowledgeable mechanic friend to take a look or send him pictures of your current situation, then see what he advises to do. You don’t want to do anything that could cause any pieces to fall through the spark plug hole and into the engine.
@jamesdavidian7717
8 ай бұрын
You are a gangster!
@guitarshred863
8 ай бұрын
hello, with th 6.75 ft/lbs torque on your valve cover i can still see the the gasket , I used the blue gasket and its visible within the gap . that is supposed to be?
@jeffharrell1874
8 ай бұрын
It’s possible you may see the gasket slightly. Confession: I did not use a torque wrench to tighten mine. I did it just by feel, but be careful not to do it too tight or you could break a bolt or thread (which I’ve done before 😬)
@remogaggi82
3 ай бұрын
I’m seeing the gasket on mine too. I only did the front cover so far. Seems like a huge gap but I torqued to spec. Any leaks? Doing rear valve cover tomorrow and hope I didn’t screw up
@baileyRTRnelson
8 ай бұрын
Thanks for the video brother.
@garywanner7860
8 ай бұрын
Thank you, you described exactly what I’m experiencing with my 99 Camry.
@sidefx996
9 ай бұрын
Thank you so much for taking the time to make this and help others out. My abs light came on and I tried several different scan tools, including one I was told cost more than my car. The paper clip gave me the only accurate diagnosis. Two wheels sensors later the ABS light turned right off and I'm back in business with the ABS working perfect once again. Thank you again and God Bless.
@uncleknucks
9 ай бұрын
My speedometer sits at 0 but odometer stays at 147k and I get the erratic shifting. CEL code P0500. Do you think its the speed sensor on the bell housing or the blue resonator in the cluster?
@jeffharrell1874
4 ай бұрын
It’s sounding like the resonator. Worth a shot for only about $5 and some time.
@zoltanfebert-zx1gs
9 ай бұрын
Does the tach also have a ceramic resonator? My Speedo and tach are both acting up!
@taylorh956
9 ай бұрын
Did this and it screwed up my speedometer more. Have to get a new one.
@MENU370
10 ай бұрын
I have the exact problem...97 Lexus ES300😢 but I can't find a ceramic resonator for it...help please...display the link ...🙏 ( I already replaced both speed sensors) major tune up 😂 and nothing & Reset the speedometer / cluster
@jeffharrell1874
10 ай бұрын
The link is displayed in the video description.
@roberthodges1267
10 ай бұрын
Thanks for the video that fixed the issues and got it back on the road.
@samblumen6321
11 ай бұрын
This is the gift that keeps on giving. Very similar presentation 1998 Toyota Sienna with 244K miles. When hot day (we are in Texas) there is no odometer display or speedometer operation. On cool mornings it works fine and is a happy camper. This has been so frustrating. Your technique for soldering is novel but very acceptable. This video was very well done and your documentation is extremely solid. I will report back success / failure after part(s) arrive and procedure completed. Again, thank you so much for the very excellent video.
@jeffharrell1874
11 ай бұрын
Good luck! I think it’s worth every effort to keep these Toyotas on the road. They are so well made!
@sitipatsitichaiboonrueng3337
11 ай бұрын
Thank you so much. It worked for 99 camry
@terryodonnell7249
11 ай бұрын
I put the same part Digi Key 490-18260-ND into my 99 Avalon and it cooked the speedometer board. After carefully soldering the part to speedometer, I immediately smelled electrical issue when on turning on the ignition. I removed the speedometer to see the board had a burn on it. Doing a continuity test on my newly soldered connection posts (3) there was no problem between them, no short. This is a similar "replacement part" to the original part suggested in another video that is no longer available PN # x902-ND - maybe the problem? I've bought a used cluster to install. Best to ya's, God Bless...
@daejohneeleslie6667
11 ай бұрын
Awesome video I like how short it is and very helpful !
@ovanestopchyan1755
11 ай бұрын
Can someone please tell me if this will work on my 1998 Lexus LX 470? Thanks
@jeffharrell1874
11 ай бұрын
What symptoms are you having?
@amandamiles4580
Жыл бұрын
Tried this today on my 97 Lexus es300. And my car is still not allowing the speedometer to work. I'm guessing the next step is purchase an entirely different cluster panel.🤦♀️
@jeffharrell1874
Жыл бұрын
Was your odometer not working before as well?
@bikersoncall
Жыл бұрын
Informative, thanks! Your volume is very low, the ads are 10 times louder.
@jeffharrell1874
Жыл бұрын
Agreed. Volume isn’t good. KZitem newbie here 😂
@bikersoncall
Жыл бұрын
@@jeffharrell1874 haha, I don't know much about doing videos, I just know how to vol adjust in my Filmora lol . I see you have two more vids related, to the Rx300, I wish you had 30, great job on this video. I just bought a 2001, not too many issues right now, just trying to learn my way around it , so I'll be able to handle future issues. I had to take off my rear wiper, as I'm in the middle of the rear window replacement, it is a substantial project.
@bikersoncall
Жыл бұрын
00:09 Recommended wiper-arm removal? I had to use a mechanical puller, not sure if twisting the motor around like that is ok and why that even helped in the removal..shrugs.. Is this in 'a' manual, or it just worked for you?
@jeffharrell1874
11 ай бұрын
No manual was used for this process. Turning it allowed me to position it in a way to relieve the tension so that it could be pulled off easily. Motor was not harmed.
@geedog813
Жыл бұрын
So helpful nice one !!!!
@LB_6R
Жыл бұрын
Thank you for this video. You saved me time, money, and knuckle busting frustration. Easy fix on 99 RX300. (280,000+ miles)
@bikersoncall
Жыл бұрын
Me too, mine isn't broken, but I wanted to know how to access parts back there. Really good video.
@EverH0p3
Жыл бұрын
Great stuff! So the resistor has no Polarity to worry about? Ie which way around?
@jeffharrell1874
Жыл бұрын
That is correct. Either orientation will work.
@EverH0p3
Жыл бұрын
@@jeffharrell1874 Thanks Jeff. Im actually wanting to do this for a 1998 V6 camry but the part number is different to the one you provide and no longer available. Your part is the same except its 47pF and the original 30pF. I was wondering if your part would work as a substitute. Any ideas?
@jeffharrell1874
Жыл бұрын
@@EverH0p3 I’ve heard success from others in all parts listed in description 👍🏿
@kyzercube
Жыл бұрын
This one is the easier of the 2 3.0L models of 99-03. I have the harder one that's in the Avalons ( 06/2000 manufacture date ). A youtuber ( can't remember what channel ) did a genius workaround by replacing the bolt with a stud of equal thread type and applying lock-tight so it would not come out easily, then poking the stud through the hole of that " bracket " thing and using a nut to tighten it down. This makes it so instead of fighting a bolt every turn with a wrench, you just have to break the nut loose with a single turn and hand loosen it the rest of the way. Also you're not fighting to reinstall it.
@hehunches
Жыл бұрын
I wish I had a code book, sick dude
@jeffharrell1874
Жыл бұрын
These code explanations can be found in a Haynes repair manual.
@hehunches
Жыл бұрын
(0:30) Connect E1 to TC with a paperclip (0:48) check dash with paperclip in (6:25) Brake pedal 8 times while ignition on ACC
@craigkennedy5328
Жыл бұрын
Hi Jeff. Just wondering if the resonator needs to go in one orientation or does it not matter? I have a 98 Camry that has rare intermittent issues with the Speedo dropping to zero when driving. Car still goes OK while moving but OD OFF light comes on and sometimes there are auto shift issues up changing from a stop start. I’ll try your repair recommendation. Thanks for posting. Kind regards. Craig
@jeffharrell1874
Жыл бұрын
The orientation doesn’t matter. It should work no matter how it goes in.
@craigkennedy5328
Жыл бұрын
Thanks Jeff. I replaced the speed sensor to fix a transmission fault breakdown a few years ago. The 98 Camry 2.2L has been mostly OK since then except for the occasional speedo zeroing while driving, check engine light ON, OD OFF light ON and sometimes not changing up from first to second gear. The error seems to resolve itself after about 15-60 seconds but I’m concerned about unresponsiveness especially in traffic. So it’s potentially a safety concern I think. I was thinking the issue could be a faulty/sticky 1-2 shift solenoid but it changes sometimes even when I get the speedo fault. I’ve ordered the ceramic resonator and will replace once received and let you know. You’ve posted such helpful advice. Thanks again! Craig
@craigkennedy5328
Жыл бұрын
Forgot to mention, I checked and found no error codes today even after the speedo zero fault occurred last night. The check engine light comes ON during the fault but then goes OFF presumably when the fault resolves itself.
@craigkennedy5328
Жыл бұрын
Just finished replacing the ceramic resonator with a new one. Test drive was fine. Smooth shifting. Will monitor over next few months and let you know how it goes. I suspect this should eliminate the intermittent random speedo drop out noticed every now and then from my 98 Camry 4 cylinder.
@craigkennedy5328
26 күн бұрын
Hi Jeff. FYI. Been a year after changing the cluster resonator in my 98 Camry but unfortunately, I still have the same issue. I think the issue is getting more frequent and it seems to occur in moist/rainy weather. I’ve ordered an aftermarket speed sensor and will see if that solves the intermittent issue. Failing that, ECU or wiring will investigated. Regards, Craig
Пікірлер