Get a roush bumper they are made with a intercooler in mind. Does the kit include turbo headers?
@TpCustoms
11 күн бұрын
@@dennisbryan7522 the kit is designed to run with stock manifolds. So no. It’s a turn back system. I don’t think there is room for a typical turbo header style system in this car.
@DirtyDianna
Ай бұрын
Got the same setup just the hellion version. Love the Set up and you are right, cant stay off the pedal. Got meth on mine and that same shifter lol. 2010 with ford alluminator crate motor.
@DirtyDianna
Ай бұрын
Making about 650 hp and low 700s in twerk lol. She moves
@TpCustoms
Ай бұрын
@@DirtyDianna love it bro. I’m taking mine to the track this fall to see how I do in sportsman’s class. How much power are you putting down?
@Nyc440
Ай бұрын
This video was so helpful
@justa3v619
Ай бұрын
That’s any headers on a 3v. I did longtubes on my 09 and omg had I known what I was getting myself into I woulda left that little 20hp on the table or whatever it was I gained 😂. Really not sure what the longtubes actually gained because I did Howard rattler cams, the ford racing intake manifold, gt500 tb, and jlt cold air intake. And looking back I could’ve just boosted for the price I paid for all the bolt on’s plus the $1000 I put into the nitrous system. Looking back I wish I would’ve just put a set of rods in it and boosted it.
@TpCustoms
Ай бұрын
@@justa3v619 right. Such a pain. And im no pro mechanic. It was awful. Almost burnt the whole car down and walked away, middle fingers up.
@justa3v619
Ай бұрын
@@TpCustoms definitely the worst one I’ve ever put longtubes on. The older 2v mustangs aren’t very fun either and compared to both the s550 headers are a walk in the park 😂
@LordCornholio31
Ай бұрын
Man guy you need to make alot of videos on your cars, you will get alot of views, i got a 05 gt kinda want to do something like you did, but right now its my everyday driver
@TpCustoms
Ай бұрын
@@LordCornholio31 I got a few more in the works but I’m remodeling my house right now. Next video is about my next bumper exit exhaust. It’s sick. Thanks bro be safe and thank you.
@user-sm8dq2to3f
Ай бұрын
U need new suspension or u can keep stock one if u install on3 turbo ??
@TpCustoms
Ай бұрын
@@user-sm8dq2to3f I’m still lowered. You just have to be extra careful. And plan around any high spots. You now have zero room for mistakes.
@samuraistang739
Ай бұрын
Hey there info on that Spectre air filter…So here’s the scoop…I had an on3 70mm kit on my 09 3v…Ran about 9psi (had a grimm speed manual boost controller)…Anywho, everything was perfectly fine until about 6 months down the road…I had the exact same spectre filter as yours…While cruising about 70mph on the freeway, I heard a slight ‘pop’ followed by a quick whining noise and slight rattle….I instantly pulled over and popped the hood…I didn’t notice anything right away but while diving deeper…The godamn metal top piece of the filter (size of a half dollar) got sucked into my turbo and shredded the hell out of the fins…I had to replace the entire cold side of the turbo…True story so be careful with that filter.
@TpCustoms
Ай бұрын
@@samuraistang739 I will swap it out asap. Thanks for the info.
@talkingjester9273
3 ай бұрын
I have a 2010 ford mustang gt as well its a candy apple red 5 speed automatic!
@TpCustoms
3 ай бұрын
I don’t see many 2010. I love mine. Be safe my friend.
@talkingjester9273
3 ай бұрын
@@TpCustoms will do!
@Nyc440
Ай бұрын
I got a 2010 as well going for the on3 want to be 450hp and 450tq to be safe, this video is helpful. Then build the motor one day
@TpCustoms
Ай бұрын
@@Nyc440 you will love it. Be patient. Do it carefully or have a good shop put it together. Swap out the cheap parts. You will be golden on stock parts. Then when you build you will be screaming.
@TpCustoms
Ай бұрын
@@Nyc440 also remember. There’s no limit on Hp. Just torque.
@RedStang_Sr
4 ай бұрын
Hopefully you have a really good tune,, that TQ number is high for stock bottom end, i bent a rod at 455TQ. What PSI you running?
@TpCustoms
4 ай бұрын
6lbs I’m driving it pretty safe bc I know I’m on the brink of blowing it up. Motor is getting fully built in a few months.
@RedStang_Sr
4 ай бұрын
@@TpCustoms wow thats good numbers for 6lbs. Wonder if that dyno is reading higher. I hit 447/455 on 8lbs with frpp intake. But it was through an auto on drag radials
@RedStang_Sr
4 ай бұрын
Yeah, the turn signal and intercooler issues might be specific to 2010. the coolant pipe is an issue with the 2005-2006 because they have a different crossover. but good walkaround of the kit. I ran a dumped downpipe like you have for awhile, then just removed that pipe coming over from the wastegate for a little clearance. now i have a front bumper exit and the wastegate just dumps out. My biggest issue is the space on the piping going through the control arm, my stuff still rattles all the time.
@gkman815
4 ай бұрын
im gonna guess you lost the blinker cause that kit is designed for the 05-09 one instead of the 10. the older ones had turn signals down in the bumpers instead of in the head light housing
@TpCustoms
4 ай бұрын
I think I get a little space once I redo that side of the piping when I build the motor. That foggy headlight is killing me lol.
@randybass5403
4 ай бұрын
I have the same set up my on3 oil relocator kept leaking. I have a MMR oil filter relocation kit adapter.
@TpCustoms
4 ай бұрын
I will have to get it replaced. This thing is trash. Thanks for the advice.
@RedStang_Sr
4 ай бұрын
I don't run a relocation kit on mine at all. just run the STP s2 filter.
@TpCustoms
4 ай бұрын
@@RedStang_Sr how tho. My pipe runs right through there and it seems like it would be impossible to swap filters later. I am impressed.
@RedStang_Sr
4 ай бұрын
@@TpCustoms you have to remove the cold side pipe from the turbo to swap it. Thats why you use the S2 its a little shorter i believe.
@kjaks1yt
5 ай бұрын
How much was installation?
@TpCustoms
4 ай бұрын
I got quotes ranging from 2k to 6k. I had help and costed me around $1500
@helthlopez5770
5 ай бұрын
Get some brisk racing plugs it will help with the warm up issue , I have a turboed 3v as well
@TpCustoms
4 ай бұрын
It’s got some very cold plugs on it now but that’s what my tuner wanted to run. It’s odd. It will even sputter a bit if it’s too cold when I pull out of the driveway, under 2k rpm.
@DJDinaggio
5 ай бұрын
Would the turbo have to be removed in order to replace the serpentine belt?
@TpCustoms
4 ай бұрын
It’s looking like that’s going to be the case unless I can figure out another way. Maybe from the bottom. We shall see this summer.
@ZalR713
5 ай бұрын
Bwahahahaha, “Mexican military” had me rolling hahaha good job on your build bud.
@TpCustoms
4 ай бұрын
Thanks bro. I love the car much more for sure
@ZalR713
5 ай бұрын
Out of curiosity, how many miles on this 3v?
@TpCustoms
4 ай бұрын
130k it’s been refreshed. I’ve taken care of it as well.
@ZalR713
4 ай бұрын
Nice, I got 179k on mine with my Paxton, DR cams, FRPP tb, delete plates and PYPES LTH and it pulls like a freight train. I keep up with the maintenance, I guess these 3v motors are stronger than people think. Btw, mines Brenspeed tuned fyi. They know their 3v stuff!
@TpCustoms
4 ай бұрын
@@ZalR713 yeah they are quality engines for sure. Like a brick. Lethal did a lot and I have a ford drag tuner that’s been in it for 25+ years. Plus I’m way out in the woods so it’s hard to move the car a long distance.
@ZalR713
4 ай бұрын
@@TpCustoms gotcha, I’m here in Houston but it ain’t my daily. I pamper her bro. And being out here, I ain’t trying to race really, too many Big Boys, lol but it always puts a smile on my face when I go for my Sunday drives. Good job brother and keep the content flowing!
@TpCustoms
4 ай бұрын
@@ZalR713 thanks man. It’s in the shop right now getting the bumper exit exhaust done now. Once she’s back I will be making more content. With some street races included that I’ve already filmed.
@gavib09
5 ай бұрын
How was the fitment of the headers? I have a supercharger with longtubes now but considering switching to a turbo setup.
@TpCustoms
5 ай бұрын
The fitment was perfect. Getting them in there was a huge pain in the ass. Worth it over all but damn what a pain
@Cherrythe3v
5 ай бұрын
what did you do with the 2 downstream 02 sensors ? i know one bung is for the upstream and one bung i have the Air fuel ratio sensor on there. did you delete those 2?
@TpCustoms
5 ай бұрын
I deleted that back two. The mafs only needs the other ones. Your tuner will handle deleting them from the cpu. There’s four total. Back two are scrapped.
@Cherrythe3v
5 ай бұрын
@@TpCustoms that’s what i thought , 4 total , 2 remain. Just making sure. Also do you have a instagram ? car page or anything ?
@TpCustoms
5 ай бұрын
@@Cherrythe3v I don’t have a car page yet. Business and personal page. I sent you link for my personal in another reply.
@user-pw9gp5hc8d
5 ай бұрын
Subed!
@TpCustoms
5 ай бұрын
Ty bro
@jackq5038
5 ай бұрын
How much power you make and what supporting mods you have as in fueling?
@TpCustoms
5 ай бұрын
490 wheel hp 498 torque 75lbs deatschwerks injectors 360 Lph drop in fuel pump
@jackq5038
5 ай бұрын
@@TpCustomsThanks bro what’s your insta and Facebook?
@3vmonte
5 ай бұрын
I'm thinking of uploading a video of my on3 kit with some upgrades I made for quality of life that makes it easier to work on lol. On a side note, I had a friend that totalled his car doing 70mph when one of those clamps came loose and made him crash.
@TpCustoms
5 ай бұрын
Yeah the clamps are trash. I got lucky. Def upload the video. The more info the better.
I know you stated that you were getting a motor built has the stock internals given you any fits Brenspeed says its the toque that kills them anything over 450 rear wheel torque is the limit also did you dyno the car stock?
@TpCustoms
5 ай бұрын
No trouble so far but I’m not racing on a track nor from a dig. Just some hard pulls in second to forth. Holding up good so far.
@TpCustoms
5 ай бұрын
I didn’t do a before dyno because the dyno was over an hour away. But I do know this model was 315 flywheel brand new. Doing the 20% loss it should have been somewhere around 252 ish wheel.
@TpCustoms
5 ай бұрын
The torque is another reason to avoid the after market headers. They tend to add just enough to break them on 6-8 pounds of boost which is what I’m running on the car now.
@firepitfitness174
5 ай бұрын
Thank you because I ammleaning to staying low on the boost around 6psi so far I'm running just a muffler delete and 93 tune plus driver mod
@TpCustoms
5 ай бұрын
@@firepitfitness174 just don’t race it or take it the track and it will hold up.
@woodmia
5 ай бұрын
Good video. Cars sounds good. Headers are hell.
@TpCustoms
5 ай бұрын
Ty brother.
@gforce_117
5 ай бұрын
My $0.02 is AN fittings with anything oil. Too risky otherwise. I’m slowly installing my kit with a built motor. Engine/subframe on the floor atm. Doing as much as I can before it goes back in. Doesn’t look like I can put their headers on till it’s in the car.(clearance). Really gonna suck ass I feel like. You had to lift the engine to do it? I was able to lift car off with the long tubes still attached. These stick out to the sides so damn far
@TpCustoms
5 ай бұрын
I needed you when I was building mine. I’m AN fittings or nothing now. It was so scary and I just knew I lost the motor. Good luck on the build. Tag me in it.
@gforce_117
5 ай бұрын
@@TpCustoms now that I have the car back on engine and subframe I see why you had to lift the motor up a bit to get their headers in👌🏻 Yeah I’ll probably post a dyno video or something. Using the 76/75 BMF, should be a ripper.
@TpCustoms
5 ай бұрын
@@gforce_117 can’t wait. Tag me in the video.
@shaudb1574
6 ай бұрын
I'm getting this kit install right now.. what size wheels are you running?
@TpCustoms
6 ай бұрын
20x9 in front 20x10.5 in back
@TpCustoms
6 ай бұрын
Sorry for the late reply.
@jaywill7192
5 ай бұрын
What numbers are you putting out ?
@shaudb1574
5 ай бұрын
@@jaywill7192 it's still in the shop getting installed on the stock block ..I'm going to have the same shop build my motor as well.
@TpCustoms
5 ай бұрын
@@jaywill7192 490hp wheel 498 torque
@arturorojas983
6 ай бұрын
Nice video! I’m doing a budget gt500 clone using an 05’ GT. It’s a 5 speed manual with a Hurst short-throw shifter, 4:10 gears, and CAI with a 91 tune. On 3 seems the cheaper route than sourcing a blower and lower manifold that will fit the 4.6 3V, but we will see with time which one will end up on the 3V.
@TpCustoms
6 ай бұрын
Good luck with the build. I’m a fan of clone builds. It’s a good kit overall. I’ve had a blast with it so far. I do love superchargers but this turbo has really pulled me to the boosted side.
@ericgross3881
3 ай бұрын
I have a 2.8 kenne bell super charger and DOB super single heat exchanger I’m looking to sell everything but the injectors and fuel pump
@Cherrythe3v
6 ай бұрын
awesome video bro. i had just uploaded a video about the on3 kit that i just had purchased ab a week ago. Thanks for the tips !
@TpCustoms
6 ай бұрын
Good luck man. I hope you enjoy it. I love mine.
@TpCustoms
6 ай бұрын
Don’t use those clamps that came with the oil relocation kit. Get better clamps. Trust me. They are trash.
@davidholbertc3190
6 ай бұрын
That's not fast at all just loud hahahs
@TpCustoms
6 ай бұрын
490 wheel. It is what it is.
@ZalR713
5 ай бұрын
Quick enough for the street, enough power to get you in trouble. Nice car sir.
@TpCustoms
4 ай бұрын
@@ZalR713 it’s just enough to be scary and have to handle it. Right at that limit before you hit too much power. It’s perfect.
@stevenromero5065
4 ай бұрын
With some cams you’ll definitely be over 500wrhp hurting some feelings
@TpCustoms
4 ай бұрын
@@stevenromero5065 I’m getting the engine fully built in a few months. 1000 hp rated but I’m gunna tune it to 800rwhp. Hopefully it will stay together.
@samstrolia
6 ай бұрын
The V8 + stututu combo doesnt get old 🤘🤘🇺🇲🇺🇲
@TpCustoms
6 ай бұрын
So fun to drive. Like fr.
@samstrolia
6 ай бұрын
@@TpCustoms badass dude, I drive a V8 but no boost for her 😂
@TpCustoms
6 ай бұрын
I got lucky. Caught the wife in a good mood when I told her about the kit. It doubled the horsepower and torque. Quadrupled the fun. So hard to stay out of the boost though. Everyone at the red lights get it. Minivans and all.
@SitChoahhDownTV
6 ай бұрын
❤❤shes officially fast 😊😅
@TpCustoms
6 ай бұрын
Thanks man. We did a 160 pull last night. It’s finally dialed in and ready for the streets.
@DreStyle
6 ай бұрын
Oh she is flying ❤
@TpCustoms
6 ай бұрын
Still a work in progress. It was test pull. I’ve done faster ones since then. Will post more soon.
Пікірлер