I cleaned it with petrolium a night and afterwards accetone that removes all restovers of the petrolium and grease. afterwards parafine wax wiith teflon powder in it I do this every 150km, I have 2 chains Why are you pushung the chain in the front sprocket? just roll it around and the chain will break the wax :)
@Mourad1m
Жыл бұрын
Thank you so much for the video! No need to add PTFE? Is it necessary to wax the new cassette too?
@mnovo
2 ай бұрын
you just wax the chain. keep the cassette and rings clean and grease free
@drama069
2 жыл бұрын
All that dirt in the wax?? Chainwax is supposed to extend the lifespan of your chain and drivetrain. Impossble if you do it like this! Chain has to be perfectly clean before initial waxing
@NicholasHaupt
2 жыл бұрын
That "dirt" is grease residue. You can use the wax over and over as the residue does not suspend in the wax. In other words, it never ends up on the chain to cause wear
@Landogarder
2 жыл бұрын
I do the same as above. 500gr Paraffine with 10gr ptfe powder <1,6 micron. It's a lot better.. I also clean with petrol (because I already have it) and rinse with soapy water. Then I make sure it's completely dry before I put it in the wax mixture. I wait until the wax is about 50-55° before I take it out (to prevent the wax from running out of the links when hanging up.) When cold just work the chain loose before reinstall it.
@mohanadbasuoni6191
2 ай бұрын
Hello! i'm going to wax my chain but i'm going to just use the Paraffine wax, I don't have the PTFE powder available where I life, is it okay to just use the Paraffine wax alone? thanks!
@cyka4075
2 жыл бұрын
Thank
@JoLe1991
2 жыл бұрын
pure paraffin wax is not a great lubricant, you should add a dry lubricant to it, about 2%wt will do, either WS2 0.1 micron or PTFE 1.6 micron, or both. they give the wax extreme pressure ability which is needed in a chain. i use tha blend on my 750W mid drive ebike and the chain simply does not wear and stays super clean
@axelschwei
Жыл бұрын
this teflonpowder makes the frogs gay xD
@neutronpcxt372
Жыл бұрын
No? Pure paraffin wax is a great lubricant.
@JoLe1991
Жыл бұрын
yeah, so do it with pure paraffin. you'll see it has no EP capability whatsoever. you'll have metal on metal friction very quickly
Пікірлер