Why does Tempur-Pedic keep this type of information hidden? Good stuff by SB and all the commenters here.
@stephen4763
2 ай бұрын
Awesome- thank you Steve Brown! I had removed the two 9V batteries first - they were toast. Then found the video on locating the 1.5A fuse on the power supply - yep it was blown. That first video referred me to your video. This beats waiting and waiting for TP Tech Service to call me back.
@SteveBrownCRL
2 ай бұрын
Yay! That little guy is so hard to find because everything is black underneath. Glad you brought them back to life. Thanks for the comment.
@JessieThoms
5 ай бұрын
Got me out of a bind today! Thank you!
@SteveBrownCRL
6 ай бұрын
I would refer to the manufacture Reveri. Here is a link to more videos. www.reverie.com/helpful-videos.html
@alexmarkev
6 ай бұрын
One more huge "thank you" from me. Maybe you or someone else can advise, why my remote has to go through this reset process at least 3 times a month recently. I have this remote that was working without any issue for many years, and now that's happening way too often.
@sowthpaa
6 ай бұрын
Worked like a champ! Thanks!
@solmar6027
7 ай бұрын
Thank you 🌷.
@cristopherquezada3608
8 ай бұрын
Muchas gracias maestro 🙏🏻hoy duermo como los grandes
@amybuxton3189
8 ай бұрын
I have done this and beds operate separately now, BUT the "Flat" buttons do not work in either side. Ideas?
@SteveBrownCRL
8 ай бұрын
No idea, however you might give the manufacturer a try.. www.reverie.com/helpful-videos.html
@erickmiller1588
11 ай бұрын
It really works thank you for your help
@williamhutcheson9325
Жыл бұрын
Hello Steve! I found your channel by searching KZitem, and I have the same older model remote. When I press the red button on the black box, I get a red light. I have checked the fuse (just in case), but I cannot get the bed to move up/down after changing the batteries in the black box and remote. Would you have any insight on this problem?
@SteveBrownCRL
Жыл бұрын
I would refer you to the remote manufacture, www.reverie.com/helpful-videos.html for videos.
@TexasRose50
Жыл бұрын
Omg! Why didn’t I look into this before??!! I’ve needed the massage function to work. You saved the day. Can’t thank you enough!!
@joyheaviland3677
Жыл бұрын
Do you know what to do if the green light doesn’t blink after pressing a button? I was given this bed by a friend and replaced the batteries but can’t get it to function. Power on bed and remote seem to be on.
@SteveBrownCRL
Жыл бұрын
It could be the tube fuse for the motor. It is black and very hard to see but it's there. I had to get them at Home Depot because they are odd ones. Or you could end up like me having to replace the whole bottom bed for $600.00.
@vytec1234
Жыл бұрын
I believe the controller can memorize up to 3 remotes hence why doing it 3 times erases any other remote and only uses that one. If you wanted to sync 2 remotes to both sides of the bed, you simply do this process once with one remote and one more time with the 2nd remote. But you're only pressing the learn button one time for each remote. Otherwise you would cancel each of them out if you did it 3 times. Thanks Steve for posting. I had to do this many years ago but couldn't remember how to do it. And needed to reset ours since we just got new Twin XL toppers for our King bed and needed to separate the remotes so that they only control one side vs where each remote controlled both sides at once before when we had a single large King top mattress.
@mersonroman4875
Жыл бұрын
mi cama no funciona se me cayo el control y se quedo lebantada de abajo tempur pedic modelo RC-WM101
@SteveBrownCRL
Жыл бұрын
I don't know how to respond as I've had no experience with this issue.
@zeke4881
Жыл бұрын
5 years later.. and pulled me out of a bind. Thank you
@radiradev1653
Жыл бұрын
💯% 👋👍👍👍 Thank you!!!
@char8257
Жыл бұрын
I can not get my box to blink green. It will turn green but not blink. Any ideas?
@SteveBrownCRL
Жыл бұрын
I would try calling the technical support number 1-800-975-1457, or here's a link to the web page, www.reverie.com/Support.html good luck. Steve
@touchpointpropertymanageme2889
Жыл бұрын
Thank you dude. I didn't realize you had to do it three times
@SteveBrownCRL
Жыл бұрын
You're most welcome. I was driving myself nuts trying to make it work with one pass until the factory told me it's 3 times on both sides. Thanks for your comment!
@randalcalvert270
Жыл бұрын
Saved me a lot of time, confusion, and money! Thank you!!! 🙏
@SteveBrownCRL
Жыл бұрын
Glad it worked for you, and you finally get some much needed rest.
@fishing4dinner
Жыл бұрын
Steve - Bless you for posting this. We have a puppy that ran under the bed and did who knows what under there in all of about 60 seconds. He raised one side of the bed up 30% and then the remote quit working for that one side. I was able to sync it with just one cycle of the green button method. Worked like a champ. You da man!!! I can sleep tonight…until the puppy wakes us all up LOL. Have a good one. -Marc
@SteveBrownCRL
Жыл бұрын
Love it. Dogs and remotes don't seem to get along very well. Glad the trick worked!
@farimasteimer1035
2 жыл бұрын
Followed these instructions and still my remote controls both side :-(
@SteveBrownCRL
2 жыл бұрын
Hum, and you did this 3 times each as well? You can try www.Reverie.com and support and see if they have alternative solutions.
@sagegage7245
2 жыл бұрын
Thanks, but unfortunately, my husband's side still controls both sides. My side is hit or miss... 😶🛏
@SteveBrownCRL
2 жыл бұрын
Remember you must do the sequence 3 times each before it will take. Sorry to hear it didn't work. Before I discovered the formula, I had to unplug my side of the bed. It was brutal having been spoiled when it did work properly.
@tmkilpatrick53
2 жыл бұрын
All the lights on my remote are on and will not go off. The remote is frozen up and will not reset. How can I fix this short of buying a new remote?
@SteveBrownCRL
2 жыл бұрын
Sounds like you may have moisture causing the short circuit. It's easy to open and clean inside. Try that first and if you have no luck, I have a used one from my bed you could have.
@tmkilpatrick53
2 жыл бұрын
@@SteveBrownCRL thank you Steve, disassemble it cleaned with alcohol and compressed air, reassembled it and no luck.
@SteveBrownCRL
2 жыл бұрын
@@tmkilpatrick53 I'm sorry to hear that. It is an awful feeling with a stuck bed. You can have my remote to try. I don't think they are made anymore. You can find me at steve stults brown on face book and send me a message through Messenger with your address. Don't do it here.
@suejohnson7235
2 жыл бұрын
Thank you for this very helpful information!
@cathy6042
2 жыл бұрын
Thank You!!
@bobbyusa9818
2 жыл бұрын
Thanks
@krisinpa8302
2 жыл бұрын
Thank you so much for posting this!! I don't know how you figured out the process because it's nowhere to be found in the manual. The sales person at the Tempurpedic store wanted to resolve the problem by selling me a new bed base. 😂
@stephen4763
2 ай бұрын
Typical ………..
@90201bryan
2 жыл бұрын
Sir, a question I bought a used bed and they did not give me the control but the bed is raised. Is there a way to reset the bed without the control?
@SteveBrownCRL
2 жыл бұрын
You can lower it but not raise it using the black box underneath the bed. It takes 9 VT batteries 2 if I remember correctly and a button to press to lower the bed without it being plugged in. If that doesn't work I would call Reverie.
@90201bryan
2 жыл бұрын
thank you so much i’m try
@-Jame-
2 жыл бұрын
@@90201bryan Did this work for you, or did you end up calling them?
@90201bryan
2 жыл бұрын
I called them over 10 times and couldn't get someone to help me and I still have the same problem. 😭😭
@maureenk1635
2 жыл бұрын
Steve, you are a fantastic teacher!!!!!!!! Thankyou so much.
@SteveBrownCRL
2 жыл бұрын
You're very welcome!
@maureenk1635
2 жыл бұрын
THANKYOU!!!!
@SteveBrownCRL
2 жыл бұрын
Glad it worked for you! Happy holidays.
@normajean4452
2 жыл бұрын
Omg You are so awesome! Thank you so much. Yes it worked . . . Like magic!!
@SteveBrownCRL
2 жыл бұрын
So happy it did. Hope you have a good nights rest.
@paulatalley1554
3 жыл бұрын
I was so frustrated with this. Thank you.
@SteveBrownCRL
3 жыл бұрын
Who'd guess 3 times a charm? Glad it worked for you.
@MuggleN0More
3 жыл бұрын
What about if the green light does not go on on the Emergency Power Down Box?
@SteveBrownCRL
3 жыл бұрын
It could be a bigger problem with the fuse under the bed. Does the bed remote work at all? Mine ended up needing an entire new bed frame. The fuse is hard to find because it's black along with everything else. It is of course a special fuse I found at Home Depot. You can always try on line at kzitem.info?event=comments&redir_token=QUFFLUhqbFF4TkZSMXZEeDE5Z3JhMFlubUl2SkUtaGZYZ3xBQ3Jtc0tsWHNZZG95NUpNaHZtV2cxMi12RUtUcGxmQ1hTemtSMHBLaDlOWV9YQUg3VmpjRDhHTkVZdjBvb0hXenBNcks1UXFuU244SllCaUR1X013M2VCZ1lHU3ZBQU0xeHJFUVQtMjBQa2dWVU0tcUhIQWpYdw&q=https%3A%2F%2Freverie.com%2F&stzid=UgzT5A-apkEUQOqHnWh4AaABAg.9By6JlMC3CH9BzB3N83QKt and look under support.
@darlenemckinney567
3 жыл бұрын
Thank you! That did the trick!
@SteveBrownCRL
3 жыл бұрын
Glad to hear!
@mgw444
3 жыл бұрын
Saved me! Thanks!!!
@cherylmoore8199
2 жыл бұрын
I want my remote to work both sides ! How do I do that?
@ATLTRANSPORTER2
3 жыл бұрын
Thanks Friend. Right on time!
@janiceangelico5594
3 жыл бұрын
Thanks
@shirleywilliams2904
3 жыл бұрын
Yeah thank you..
@lornamoon1
3 жыл бұрын
I love you for making this video! This is exactly the info I needed to fix my bed!!
@SteveBrownCRL
3 жыл бұрын
Glad to hear!
@hadrumcrawford9660
3 жыл бұрын
And that black box has two 9v batteries. Repl and check for corrosion. Clean with nail polish remover and qtips...
@connordabsrosin1512
3 жыл бұрын
Neither sides are working at all with the remotes, will this fix the issue?
@Pw6872
3 жыл бұрын
Thanks!
@patrickanderson6333
3 жыл бұрын
Didn't work for me. The green light stays on and won't go out after I hold the remote button down. The light will blink though. Pressing the little black button doesn't seem to do anything as well.
@SteveBrownCRL
3 жыл бұрын
Call Reverie 800.973.8374
@denisebendickson8593
3 жыл бұрын
m green light goes on but it does not blink when resetting
@agnesvs9263
3 жыл бұрын
It doesn't work for me
@SteveBrownCRL
3 жыл бұрын
Do you get the green light?
@vanessasapp1430
3 жыл бұрын
Thanks! Worked like a charm after months of trying to figure out why my mother's bed stopped working!
@SteveBrownCRL
3 жыл бұрын
Thanks for the great comment. Got to keep mom happy.
@ilovesweett
3 жыл бұрын
I know this is an old video but what happens if I can’t get the green light to come up. I’ve tried and nothing but if I press the red square button a red light comes on. What am I doing wrong? 🤦🏻♀️
@SteveBrownCRL
3 жыл бұрын
Check to be sure the bed is plugged in. If it is then the fuse most likely has blown. It's located in the power supply box attached to the bed. It's hard to see because everything is black. It's a 1.5 amp small fuse you can get at Home Depot. My bed however was beyond the fuse. Something else was shorting out causing it to blow. Reverie told me a new frame would cost 650.00 or so.
@ilovesweett
3 жыл бұрын
Thank you!
@jonnyspace50
3 жыл бұрын
This happened to me. It turns out the battery contacts in the remote were corroded so I filed them a little and it worked. No repairing needed!
@pa4fsm
3 жыл бұрын
I can get red light on the box but not green. I’ll check the fuse.
@mgeezzzzyyyy
4 жыл бұрын
Hello there. I tried your method. Not sure what to do. Both remotes keep operating both sides simultaneously. Can't get them to work independently. Any advice would be greatly appreciated.
@SteveBrownCRL
4 жыл бұрын
I'm sorry it didn't work. You must do the reset 3 times before it works. You might want to try calling the manufacture or go to their site reverie.com/ for more help. Hope you find relief soon.
@mgeezzzzyyyy
4 жыл бұрын
Thanks for the reply! I'll see what happens.
@Lbrf311
3 жыл бұрын
I have the opposite problem.
@mgeezzzzyyyy
3 жыл бұрын
I got Reverie to send new remotes as they admitted to the remotes I have not being capable of working independently on our bases. They said it was a known issue and they replaced my old remotes with the newer style ones.
@larrymcculley
4 жыл бұрын
Couldn't get the right response from customer service, your video was just what I needed for a reset. Thank you!
@SteveBrownCRL
4 жыл бұрын
Your very welcome
@cjssr1972
4 жыл бұрын
I can't see which buttons you are pressing on the remote and how long you are pressing them.
@pchyland
2 жыл бұрын
Any button, and just until the green light begins to blink.
Пікірлер