Do you know if the honeycomb part of the grill can be separated so the rest of it could be painted?
@MrBoogereater69
3 ай бұрын
Can hear what I needed cause of the wind
@AMOffRoad
5 ай бұрын
Hi, I love your content. I'm Elsa from Amoffroad. Do you accept sponsored products?
@HDMann292
5 ай бұрын
link for that front push bar with the lights?
@marceaton3843
9 ай бұрын
Why does everyone skip that sensor... mine will not come unplugged for anything.
@bad3032
10 ай бұрын
What bull bar is that?
@368engbn
10 ай бұрын
Sounds like Proooauto is a scam company. Clicked the link and Microsoft locked my computer.
@BoydFilms
11 ай бұрын
the most important part of your video had wind destroying what i came to hear you explain.
@JamesReedy
Жыл бұрын
I think they did the T that way to dodge potential, “counterfeit” and copyright infringement/importation laws.
@markbecker8661
Жыл бұрын
What does the wiring harness look like and where does it plug in under the panel?
@mrmonet9354
Жыл бұрын
Thanks ! Just got a knock off finally on my 18 OR . Hated this grader grill for 4 yrs now . Finally putting on what you have . Thanks for the help
@abdullahal-shimri3091
Жыл бұрын
Planning this exact swap on my Express.
@XerGrizZz
Жыл бұрын
Thanks for the video I wanted to see this in person on the truck and I love it appreciated your time 🤙🤙
@rickylee2477
Жыл бұрын
Must have went out of business. Link no good now.
@louispicone5954
Жыл бұрын
Hey. I put the TRD Pro Grille on my Tacoma and put the Sensor Garnish in front of the Sensor but the Radar for the Cruise Control and Auto Braking is not working.
@catchemwithcorey704
Жыл бұрын
i have this grill but didn’t come with letters can anybody help me find some letters ?
@ErickHernandez-yh3nl
Жыл бұрын
The link to buy the grill doesn't load
@mattslocum4677
2 жыл бұрын
Thanks for the video. I have a black, 2019 TRD Sport also and getting ready to install the new grill that arrived yesterday!
@BigFerrisL
2 жыл бұрын
can someone tell me were i can find this grille
@dflex4180
2 жыл бұрын
to complicate w wiring just run it to 10amp fuse which goes on when the igintion is switched who wants to keeping toggling it off and on? it comes when car is powered off when key is removed
@craig9069
2 жыл бұрын
Nice video! What color are those letters? Mine came in black. They look silver, maybe metallic.
Thanks man! Just the vid I was looking for! Nice Taco!!! And I agree, the stock Sport grill is hideous!!!
@kota11334
3 жыл бұрын
As far as the lettering. Are there holes to line them up ? So the letters will come out staright.
@alexgarcia3900
3 жыл бұрын
How does the garnish work? I have a 2016 tacoma that came with all the trd accessories and I also have a 2019 and I wanna swap all the stuff from my 16 to my 19. My 16 has a oem grille but not the garnish for the tss and I ordered an ebay one because the oem is way over priced. But I don't want issue with the tss
@markum5094
2 жыл бұрын
If I understand your question...The 2016 did not have a sensor or garnish so I doubt that you can swap that grill onto a 2019!
@oc6266
3 жыл бұрын
nice truck! hey what the headlights name? love it
@jmastergaming1463
3 жыл бұрын
Sonny cristobal I have a when i bought that grill it doesnt come with the glass cover for the sensor where do i buy that
@jmastergaming1463
3 жыл бұрын
When i bought that item it doesnt come with that glass cover for the sensor where do i buy yhat
@markum5094
2 жыл бұрын
Buy that on Ebay or Amazon... cost less than $20
@bartolodsm888
3 жыл бұрын
is the tss garnish supposed to be see through?
@markum5094
2 жыл бұрын
No
@romeovalverde9434
3 жыл бұрын
Installed my Proooauto Pro grill with the led & garnish cover. Perfect fit and looks awesome!
@adanumanzor6390
3 жыл бұрын
Did you buy the garnish separately?
@markum5094
2 жыл бұрын
Garnish piece is always separate unless you but OEM
@christineann801
3 жыл бұрын
Mine doesnt fit my truck and i have the exact same truck. I got it without lights tho. I also have aftermarket headlights but they dont interfear. Getting kinda frustrating. Binding at bottom corners... im thinking maybe ill just wait til i change my front bumper in two weeks. New bumpers are flatter. Fingers crossed. Was looking far a way thre firewall also...awesome! Thank you
@Jerlemi2
3 жыл бұрын
How do you tolerate using cruise control in 3rd gen Tacoma’s? One little incline and the rpms and transmission go full retard. Toyota may as well disable it at this point.
@jesserios2911
3 жыл бұрын
Can you add a link to the harness and switch you used from ebay?
@lin.a6943
3 жыл бұрын
Just got a new drill for my taco, it’s gonna be my first time changing something on it and this video made it so clear on how to install, thank you!! Love the Tacoma
@lin.a6943
3 жыл бұрын
Grill**
@lin.a6943
3 жыл бұрын
@@jordancockett3887 huh
@tracinordin3634
3 жыл бұрын
Where do you connect the wires once you get them through the firewall
@darcyharold
3 жыл бұрын
He doesn’t really say where the power for the lights comes from. He just shows the wires going to that switch in the cab . I’m confused
@nathansieg4467
3 жыл бұрын
@@darcyharold kzitem.info/news/bejne/0aeHsK6fq3tmloY&ab_channel=WikedWips Not the same project but same idea...he shows where to tap into power
@EKclick
3 жыл бұрын
This is not fit 2012 1500?
@enriquecortes9171
3 жыл бұрын
fits models from 13-18 but maybe you can get away with it.
@remcovheumen1768
3 жыл бұрын
Yeah that’s what I’m wondering, I thought the 13-18 just have the projector headlights as only difference to the 09-12
@christineann801
3 жыл бұрын
Not fitting my 2014. Same exact truck as this in video except in blue. Im obviously missing something here. Bummed out!
@nicholms
3 жыл бұрын
Thanks. Helpful video. Im curious about the headlights you have, are those aftermarket?
@oc6266
3 жыл бұрын
hahaha if he didn't answer you in 8 months look like he won't answer me today,but yeah look nice those headlights,if you found it send me the link to check thx
@jaygutierrez3798
4 жыл бұрын
Question those little proms you said you had to rip out the sensor did you break them?
@kennyskipper
4 жыл бұрын
Off topic, but what is the plug for at the top of the radiator? Mine is just dangling and it goes to nothing.
@7Amps
4 жыл бұрын
I think it's the block heater for really cold climates
@colcons7
4 жыл бұрын
Do you need a fuse?
@MrBigdaddynaz
4 жыл бұрын
I just installed mine and I keep getting an error message for the sensor (it says I need to clean the sensor but it is not dirty). Is anyone else having this issue? And, if so, how was it fixed? Thank you
@FredyM703
3 жыл бұрын
Make sure the sensor is flushed straight and you have the right tss cover for the sensor. Not a plastic cover which will block the sensor.
@yezkaholic
3 жыл бұрын
Did you put a replica or OEM grill? Did you use the OEM garnish as well?
@mk8530
3 жыл бұрын
It's been about a month now, and Due to the TSS, I cant use Cruise Control. I really dont miss the "Auto Slam The brakes" It does, but I really want my cruise back.
@markum5094
2 жыл бұрын
@@mk8530 you may need to slant the top of your sensor toward the engine by adding 2 or 3 small washers between the sensor and where it attaches to the grill on the one stud at the top. Trial and error for the number of washers, mine took 3 washers and it works fine!
@las5454
4 жыл бұрын
can i buy just the letters?
@CornyHusker
4 жыл бұрын
Nice video, clear commentary and nice editing. Going to get a grill after seeing this. I was hesitant because of the sensor
@allraw9401
4 жыл бұрын
Is the M smaller then all the other letters looks skinnier ?!
@Tom-zg1vl
4 жыл бұрын
Your radar was factory calibrated for the original OEM grill. You just eliminated the radar safety feature. Looks cool! Look up “Cosine Error” in google and you’ll see the mathematical proof.
@mustangecoboosthpp3869
10 ай бұрын
I don't think cosine error is the issue with these sensors, the reason I say this is because these radar sensors are only used in a forward direction directly in front of the vehicle, the sensor does not know the size or height of a vehicle in front of you, you might be behind a sports car with a total roof height of only 40 inches (think Mazda Miata top down) to 54 inches from the ground, another vehicle may be 72 inches total height above the ground the only thing the radar sensor is doing is sending out its signal and it bounces back to the sensor. Everything is in a straight line of site. As long as the sensor has been mounted flat and not angled right or left or up or down the short distance these sensors work at I just don't see cosine error being an issue. Another reason I don't buy the cosine error issue is because these trucks depending on the model you have are different heights, moving the radar sensor higher or lower depending on the suspension options on the truck. The same style grille can be two or three inches different for the height of the radar sensor depending on the suspension options. I think what is an issue is the material the garnish cover is made of, the density of the type of plastic that is used. Toyota should be ashamed of themselves charging as much as $450 dollars for a small plastic cover that costs them likely no more than a $3 to $5 dollars to manufacture. The reason I think it is the covers that are the issue is because people get the message the cover is dirty when it is not, that may be an issue with the density of the material used to make the cover.
@samuelrowland76
4 жыл бұрын
Original Video By @BLOCKHEAD this video was his but re uploaded by this channel
Пікірлер