Next time pick a better sound, that is not music. Sounds like someone scratching on a wire mesh fence, otherwise video was informative.
@mathemankwana
3 ай бұрын
Thank you best solution
@mylifted4x4
4 ай бұрын
5 years later and I'm definitely hoping to revive the old charge 3 this afternoon doing this :)
@jonathanbyrd12
9 ай бұрын
Thank you you are a god. I fix speakers well... Trying to and this one has me stubbed. It totally fixed it. Guy was like just throw it away you can't fix it well motherfu.... I did... bahaha
@nandoz3630
11 ай бұрын
Thanks man... Just got mine fixed just AS YOU SAID Was the right side with that sound of broken speaker or blown... so i took off the speaker and turned it around to find a spot where the cable stays tight, wich is when it stops the sound and used CRC QD Electronic Cleaner that is my best friend when dealing with electrical issues like this one JBL Charge3 Works perfect again...
@sharnijephson7818
11 ай бұрын
We had a 1st gen Echo in our master bathroom for listening to music in the morning kzitem.infoUgkxABghAEkaIDGZfHRBH3D3rBrlraNmnC71 and while in the shower. I didn't realize how tinny and awful the sound output on the original Echo was until we replaced it with the Studio. It was a sonic upgrade far beyond what I was expecting. Just wow. I love it because it's like having speakers IN the shower. My friend likes it because the music is so loud that she can no longer hear me singing. So that's a win-win.
@phillydterminaldisease6578
Жыл бұрын
THIS IS THE RED RING OF DEATH ALL OVER AGAIN IT WAS THE SAME ISSUE THE SOLDERING! it’s because of regulations we can’t use lead based soldering wich is a double edged sword 😂😂😂
@Soomvb
Жыл бұрын
what if it didn’t work, is it blown?
@ComeAtMe
Жыл бұрын
I had a similar problem turns out the battery went bad after replacing it no problems at all
@brunomioranza9860
Жыл бұрын
Niceeeee, it worked great! I had dropped it some days ago and it got bad all of a sudden afterwards. Thank you so much dude!
@cenecirojason
Жыл бұрын
Thank you!
@kpmg20201
Жыл бұрын
Thanks a lot, it worked for me too!!! 😍
@poodlenoodlesoup1
Жыл бұрын
Well, I actually replaced the little speakers thinking it was that and it is still cracly so I will have to look inside to find maybe another loose wire
@cuttinrugs
Жыл бұрын
thank you for the video, but riddim is terrible lol
@kevtalbot137
Жыл бұрын
Nice fix.
@m1n1_de
Жыл бұрын
Sorry having to say that, but you killed it. First, your soldering skills are not good, second, the speaker wires need to move and have to be flexible. You reduced the length of the flexible part of the wire by 50%…. So even this works for the moment, it will certainly kill the speaker i. A few hours.
@kellumbecker7641
2 жыл бұрын
Thank u so much!! This fixed my new speaker i had thought it'd blown 30 days after i got it!
@Mrmonkeypants88
2 жыл бұрын
Gonna check this out today! Mine just started with a rattle/crackle I just couldn't figure out but never thought of the wire behind the connection tabs!
@diegojesus3402
2 жыл бұрын
Por lo qué puedo apreciar Este problema pasa con Los jbl charge 3 GG, pero con el otro modelo TL no pasa nada, tengo qué recalcar qué tengo Los 2 modelos y solo el Modelo GG presently esta falla, if you don't understand just translate :D
@eric.7192
2 жыл бұрын
Dude Just used you tips! Thank for your help, harder part was to learn how to solder without making a mess, which I train a couple of times in older wires. Also make sure to buy solder wire with flux in it (I used 2% flux) Other Than that Pretty straight forward Thanks
@simpesfaip
2 жыл бұрын
Youre song sounds like broken stereo and speaker.Maybe driver was ok...
@c0rpse1
2 жыл бұрын
my charge 3 had a clip system inside, just gonna solder over them a bit fuck it
@nilskoster4859
2 жыл бұрын
Hij moet opgelost worden door Stefano
@fookaiwai
2 жыл бұрын
dear all, I realised the vibration (sound) mainly from the right side of the speaker where I removed the left speaker as per video and solder. didn't seem much improvement tho
@georgehanganu6754
2 жыл бұрын
Thank you You saved my day, that thing was driving me crazy Worked like a charm
@angecolosimo1085
2 жыл бұрын
How about explaining how you removed the cover ?
@E85_STI
2 жыл бұрын
My issue is the copper wire that’s inside the speaker cup I moved the wire and it worked better. Too bad mine isn’t where yours was. Thanks for the info. Amazon sells a replacement speaker for 9 dollars so I’ll just swap it out.
@troyjohnston1700
2 жыл бұрын
My dude I'm excited to try this thanks for the video !
@rikaltink4939
2 жыл бұрын
This is my second jbl charge3 first one had the same problem as my second one. This fixed it. But no jbl for me in the future 😂
@bbooster
2 жыл бұрын
Thank you so much turns out i ALSO had a mini hole in the surround foam that made a buzz
@Kenaz82
2 жыл бұрын
Thanks very much for this! It worked like a charm on my Charge 3
@grizzlyph.lakayngarud8174
2 жыл бұрын
NiceOne! Thank you bro i was planning to buy or convert new driver to my charge 3 but luckily i watch your video and Yes its working again like a brandnew MARAMING SALAMAT #fromphilippines
@stephaniesutter3972
2 жыл бұрын
Thank you! Kept me from buying a new speaker! Super helpful.
@victorntorres
2 жыл бұрын
You're a lifesaver, mate! Thank so you much! Cheers!
@dustintrombly
3 жыл бұрын
Your speaker was never broken. That's just old Oolacile sound design! xP
@anthonywopaness2927
3 жыл бұрын
Thank you for your time in making this video, the problem you fixed is spot on the same as mine so hopefully so will the fix .
@bankacc
3 жыл бұрын
You are an actual god, my man. Thank you. For those of you out there that don't have soldering tools, I held an opened up paperclip in a pair of pliers. I heated the paperclip over a flame until it was red. I used a pair of tweezers with my other hand to clamp the wire tightly against the board while applying the hot paperclip to melt the glue. It reseated the wire well enough, and it's been working fine. Obviously use caution, and enlist the help of an adult if you're on the younger side because it takes some steady hands and can be dangerous
@towardseternitybe5975
2 жыл бұрын
There's no god but Allah, and the prophet Muhammad peace be upon him, is His final messenger.
@richarde1355
2 жыл бұрын
Thank you bankacc, aka MacGyver! Love the paperclip solution!
@unreal9665
8 ай бұрын
? @@towardseternitybe5975
@cromagnon305
3 жыл бұрын
Cheap ass shit being sold by JBL. I have the same issue with the same channel. Wiggling the tinsel lead clears it, but I worry it's on the cone/voicecoil side 😑
@funnycapturedvideos29
3 жыл бұрын
Even I have the same problem with my flip 3.i dont understand y they have this fault with such a expensive product??
@funnycapturedvideos29
3 жыл бұрын
@Owol .. It's expensive in my country.
@funnycapturedvideos29
3 жыл бұрын
Well thr is jus one factor, it's expensive, n dat is dat
@juanolcese5668
3 жыл бұрын
I love you man ! You just saved me ! I was about to throw it away.
@groomingsessionmalayali
3 жыл бұрын
Mine happens when charge is low and while direct power it wont make the noise
@groomingsessionmalayali
3 жыл бұрын
What should we do to fix the wire.... We need to solder it?
@user-hk9yw2el2b
3 жыл бұрын
I love u man thx <3
@notmuchofagamer9181
3 жыл бұрын
pick n pull>grip n rip
@gregfee1120
3 жыл бұрын
Have a Charger 2+, crackling sound on right speaker, took it out OK... what is that little copper wire called, sure does vibrate when music playing, cant see any tears on speaker itself, so will re-solder all like you did, any precautions? temp on soldering pen? should I be soldering on the inside of that copper wire... like inside the speaker where it joins to the driver? thanks for doing this type of repair, tks, greg
@fernandodal9736
3 жыл бұрын
Thank you! This fixed my JBL!
@makzilgaming4735
3 жыл бұрын
can i use glue gun after i soldered? it because my jbl is cracking now
@gengen5704
3 жыл бұрын
I don’t know how to solder but what I did is I stuck cotton in between that copper wire to reduce the vibration created by the speaker so the cotton holds the copper wire in place reducing the buzzing noise... it’s just a temporary fix because I don’t know how to solder.
@dawudasha977
3 жыл бұрын
I just took your advice. Fixed my speaker! Thank you Bro! You're much appreciated.
@KingsleyRodrigueskinZ
3 жыл бұрын
Did u try soldering?
@dawudasha977
3 жыл бұрын
@@KingsleyRodrigueskinZ Yes. I soldered it for a better connection.
@luisenriquealonzominetti1538
3 жыл бұрын
I searched for 20 min this video again just to make this comment... It really worked. In my case I just soldered the main cable to the one out of the driver's coil, then hot glued it to the speaker frame. It works like a charm now. Thanks!
Пікірлер