We know that many companies can provide quality transmission rebuilding services. However, ENHANCED TRANSMISSION INC. is deeply dedicated to going far beyond typical transmission shop services.
Call of Ktulu in a transmission video? Now that’s what I’m talking about 🤘
@JoshWellborn
4 ай бұрын
Where is the reverse switch? I've got a problem with the reverse lights staying on and draining the battery.
@giantchasers
4 ай бұрын
Yea I’m definitely not trying this
@hobo350
5 ай бұрын
This man is working with this transmission like he's done this a Bunch of times. Thanks for posting.
@420Brew
5 ай бұрын
Hiw do you put the rocker on spring back in? Silly me didn't realize the park had something behind that plate. Still learning transmission. But this one is one easy one for sure!
@420Brew
5 ай бұрын
If you have a slip issue its usually reverse 1st then forward? Mine for two weeks was 1st gear,then the aecond week second gear. Pulled a P1700 code! Intermediate!?!
@420Brew
5 ай бұрын
Do I have to reprogram a new solenoid?
@harrycash8713
6 ай бұрын
Excellent video. I'm in Louisville Kentucky are you close? I have a 2003 explorer 4.6. p0733 code. Slips in third. No other problems. Thanks for your time.
@user-ok8yo2nl7f
7 ай бұрын
Nice Video .... The flow control valve in the front pump on a 2007 explorer if its bad can it cause slipping in drive and reverse at any time ( intermittant) and then resume normal transmission operation again. ? Thanks
@JoshWellborn
7 ай бұрын
Very helpful. I watched multiple times before I tore down the 5r55s in my mustang
@mikejohnson9118
5 ай бұрын
What year//model Stang? Hows it holding up? Anything you "beefed" up or modded? Thx
@JoshWellborn
4 ай бұрын
@@mikejohnson9118 it's just a 2005, v6 convertible. It had a broken reverse band and broken sprag in the reverse drum. I replaced both. I had to get some help on adjusting the shif cable, as the neutral safety switch kept engaging while in reverse. But I'm in good shape now. Nothing moded on it. just a fun car to cruise around in on nice days with the top down.
@billylane6602
8 ай бұрын
Like watching a surgeon.
@dippy104
9 ай бұрын
Can you replace the output shaft without removing the guts of trans from front?
@yeahrightmate
Жыл бұрын
Hi,can you explain how the 5 gears in these trans work because they only have 3 gears positions and with an overdrive makes 4 speed, but these are supposed to be a 5 speed. Thanks.
@Jordan7Williams
Жыл бұрын
Awesome video. Was wondering if you had a link for the best rebuild kit for this gearbox. I need to import it to the UK
@_kvngmilton_5522
Жыл бұрын
Hey I have a question I got a transmission I was sliding it under my truck and the torque converter kind of slipped out pushes it back but I’m guessing the input shaft slid out as well then got jammed when I pushed it back it’s too long won’t mail up what should I do
@vcmdpropulsion126
Жыл бұрын
is the 5r55 s the same in most all years. like 04 to 2010? 4x4 4.0 sohc (4L2P-7000-AB) and (7L2P-7000-DB)
@yeahrightmate
Жыл бұрын
What did ford achieve by not putting a dipstick tube in these.
@macD723
Жыл бұрын
I know this is 6 years old but, how about the 5R55E? I know the valve body is different and doesn't have a solenoid pack, the solenoids are actually in the valve body. But, is the rest the same?
@DibroTeam
Жыл бұрын
What can cause , not engaged 4th or slipping and hard engaged reverse.
@wesleyraya
Жыл бұрын
I like how you have Metallica's ORION playing in the background.
@veelink6345
Жыл бұрын
Bad ground on that transmission with all the electrolysis on the housing bolts
@bigbodyboyz536
Жыл бұрын
A master @ work 👍👍👍💪💪💪
@Roosterkilo
Жыл бұрын
This guy had this tranny apart in 20 mins my local shop said it would take 8 hours same trans 06 ranger 4x4
@5alid633
Жыл бұрын
Hhhhhhh yeh all right
@skyking3717
Жыл бұрын
❤❤❤
@sherwoodchevy
Жыл бұрын
Wow Rick, your a master at your craft. The new generation has no skills like this!
@alexeyerushkin2091
Жыл бұрын
Excellent job! Perfect background music, too!!!
@joshuascull6128
Жыл бұрын
hey Brother great video and great music taste could you do more on the solenoids that hole panhandle sandwich i took mine completely apart and I'm freakin out a bit out a bit
@BeingJermaine
Жыл бұрын
How much does a rebuild like this cost
@juiceman8108
Жыл бұрын
2007 explorer rebuilt first transmission at 120, was fine till about 180 but out of warranty and went out again, I just replaced with with one from the junk yard, that one got me to 250 and then I junked it, it was a good day watching it go
@anthonycaviness9172
2 жыл бұрын
This was an amazing video. Just what I needed to see. I'm not getting ready to attempt my transmission with reverse issues but will use this informative video. Thanks
@dootdoot1867
2 жыл бұрын
I think there is a dip stick upgrade for the pan, alot of mustang guys put it in and run extra cooler systems to extend the life. But also because the 4.6 is such a heat soaked system.
@bugayev
2 жыл бұрын
tiene mas cosas que un vómito esa transmisión
@dennish150
2 жыл бұрын
great job
@kennetheady1347
2 жыл бұрын
🤔I have learned 3 things here. #1 respect a transmission tech. #2 pay the $ cost to have this work done. #3 let them do it. TY SIR 😎
@GiorgosC-rp5ms
2 жыл бұрын
hello how much did that job cost
@shawincarter871
2 жыл бұрын
I have a question I have a M5A1 TRANSMISSION ON A 1994 FORD RANGER That I'm replacing the slave cylinder and the plate behind it I took off to replace the seals and when I took it off the seal fall off and I dont witch way it goes back in can you help me out it's to top seal that goes around the part that goes into the clutch do you have a number I can call you and send a picture of it so you know what I'm talking about? thx!!
@HAL-dm1eh
2 жыл бұрын
I really wanted an 05-09 Mustang and see that I'm stuck with this trans because I can't find one in my price range with a 5 speed, if any at all. After a lot of research it has really turned me off from the enjoyment I think I'd otherwise feel owning and driving one of them because I'd always been worried about this POS transmission grenading on me. I've had experience with those servo bore issues in the early 4r70w transmissions. There is a new unit you can buy for the 5r55s that has a groove machined into it so an o-ring will fit onto the shaft. That solves the problem permanently without having to bore and sleeve those holes. The only big issue I had with the 4r's is they only 4 speeds and it was horrible for acceleration. Ford fixed that one issue with this new one and in doing so, introduced a whole slew of new ones.
@patf8845
2 жыл бұрын
Hi. I was hoping you could clarify something. Do the 5r55 and the 5r55s use the same housing? As in can I switch all the interiors from one to to the other if one housing is cracked. Thanks in advance.
@metalmorfik
2 жыл бұрын
Do you have a video for 5r110w inline parking brake?
@Aplushandymanservice
2 жыл бұрын
Can a vacuum leak cause the transmission to heat up
@MustangGuy1996
2 жыл бұрын
My 05 mustang with this same transmission shifts completely fine in all forward gears but reverse takes exactly 15 seconds to engage…no more no less and it only does this when the engines warmed up. When reverse does engage it’s very smooth it doesn’t slam into gear…Also it will go into reverse immediately with no delay when cold starting. I’ve already changed the filter and replaced the fluid twice. No flashing O/D light, no check engine light and no slipping/delayed gear engagement in drive. Just this weird problem with reverse. It’s been this way for almost a year since I bought the car and it hasn’t gotten any worse. What in the world could be causing this???
@Indiana_Golden
2 жыл бұрын
Great video I actually followed what you doing. I've not overhauled a 5R55 yet and I work in a dealership. It looks like you have built many of these units. I am doing my first one the overdrive sprag was locked up and smoked the clutch pack. I may do a few more on the side if I can find a good parts source. I can knock a 6F or a 10R out in record time though.
@Wednesday_Addamsreal
Жыл бұрын
Where do you get the parts in case you need replacements
@fabianlang7537
2 жыл бұрын
That's a professional at his best!👍
@Michaelalanharlow
2 жыл бұрын
I can tell you've only done this once 🤣
@phillipamerson1672
2 жыл бұрын
He moves to fast to be practical. But he knows his stuff for sure
@trenacook7694
2 жыл бұрын
Sir you are talented and experienced. I wish you lived near me. My 2006 explorer has the same issue, but I don't have anyone i can trust to work on it. Nice video.
@dannyrice398
2 жыл бұрын
This guy is working really fast ,pulling all those gears out of the trans ,dam i through he was going to pull a baby out of that thing 😁
@williesteele4503
2 жыл бұрын
That was amazing to watch! your skill and knowledge is to be admired. The final conclusion I took from this is that this Ford 5R55S is a piece of junk, poorly engineered. Unfortunately, I have this transmission in my 2007 Mustang GT. It has yet to give me any issues with 128,000 miles on the car, but at least I know what to do and what to tell the Transmission repair guys to look at if I do have problems with it. Thanks for this amazing video and your time.
Пікірлер