what truck bed did you use? I'm taking the dump bed off mine and doing what you did.
@LisaMedeiros-tr2lz
Жыл бұрын
Beautiful truck, but honestly don't like the paint. Not being a hater. You clearly did a ton of work with the better than new interior, Duramax, bedliner, LED lights, and wheels. Probably a lot else we did not see here. Since it is clearly not a factory look with the liner, interior, LEDs and wheels, don't know why you would not just put a monotone or dual tone like new paint job. When a truck naturally patinas, it can have some patterns of rust and paint wear around seams and on upper surfaces, plus all the places GM trucks are known to deteriorate (around wheel wells, rockers). The way it was done it looks contrived and patterned almost like camo, so it doesn't look naturally done. I am also not a fan of the old rusty look where some just clear coat to preserve but still highlight age decay, calling it "character" and "cred". I think that is silly. Natural rust just makes it look "old" and "deteriorated". Again, some people are like that and are purists with the mindset to make it look new is "sacrilegious". I don't know how it can be, because if you are going to do any "resto-mod" at all and update anything, it is already not original. I don't think it is bad to improve upon what the factory did on a budget and with antiquated technology, but that is just me. I also am not a fan of "road-worn" Fenders and Gibsons for the same reason, and in those cases makes the owner just look like a poser (that does not apply here, just another example of how I am not a fan of "intentional aging"). Everyone has their own ideas though, and I would be very proud to drive that truck. Overall it is awesome. I would just repaint though. Lol.
@keithbrann5086
Жыл бұрын
That looks awesome. I would only suggest sourcing some vintage diesel badges
@18Wheels-T
Жыл бұрын
6.6 Duramax, excelente trabajo 👏🏽
@remguiller7593
Жыл бұрын
I LOVE THIS PROJECT..
@edmarmohr3611
Жыл бұрын
Que projeto lindo 👏👏👍👍😄😄🇧🇷🇧🇷
@murraymadness4674
Жыл бұрын
Nice truck, but that Fake Patina looks like...FAKE PATINA...can you not see how bad that looks????
@johnbolton6096
Жыл бұрын
How much price?!
@johnbolton6096
Жыл бұрын
Do you sell it ?!
@sherwinballadares2545
Жыл бұрын
how much would it cost to build one like this
@ronaldlong1811
Жыл бұрын
How can I contact you. Interested in selling the C50. Thanks
@masiosare42
Жыл бұрын
Son unos maestros 👍
@luisjoseluissimoncallata8312
Жыл бұрын
Una obra de arte felicidades al restaurador que tiene abilidades que la mayoria de nosotros no tenemos saludos desde Bolivia.
@johnmeador498
Жыл бұрын
I like it good job on the build now I want one 👍
@travis1572
Жыл бұрын
Gorgeous 😍 looks GREAT well done Love it
@michaelbradley7529
Жыл бұрын
Beautiful builds on your channel, but if you turn off comments, that video will get an automatic down vote from me. Just a heads up, I may not be the only one who has that rule.
@murraymadness4674
Жыл бұрын
He doesn't like criticism...like how utterly horrible that fake patina is..
@donbush9091
Жыл бұрын
❤
@wai701b6
Жыл бұрын
I want one.
@marksman4004
Жыл бұрын
Hella clean bro. Does the duramax still take Def?
@chadwick1084
Жыл бұрын
Bruh turn the comments on and youd get more views, jus sayin
@RyanPalmerRegeneratetreatment
Жыл бұрын
Love the C50 builds! Where are you located?
@elmowilson298
Жыл бұрын
Awesome!. A Chevrolet C/50 '67 turned into a pickup with a C10 truck bed.Results talk by themselves. It needs some paint hand
@CongoChango
Жыл бұрын
Awesome build, I rather have a twin turbo LS under the hood , it would be alot of eye candy and sweet power.
@user-427.commodore
Жыл бұрын
Checker plate trays look cool to
@user-427.commodore
Жыл бұрын
Good you turned comments on!
@user-427.commodore
Жыл бұрын
Why do i love these trucks, owned sedans, my whole life!? Damn
@bwaterfiltration4616
Жыл бұрын
Interested in a c/50 build. Contact me
@robertojuarez959
Жыл бұрын
😲😮😍🤩💖👍‼️
@thegoodthebadandtheugly9920
Жыл бұрын
Are there any words that can express how badass this truck is? WoW 🙏
@rubengonzalezdominguez3103
Жыл бұрын
Muy bonita camioneta aunque yo esa me gustaría más 4x4 y más alta pero aún así gran trabajo te felicito 👍
@olchat2012
Жыл бұрын
Tienes buenos gustos. Tienes el modo de pagarte esos gustos o solo opinas tus sueños guajiros? Por que si opinas asi, creo que bien puedes hacerte tu propia trocar a tu gusto o mandarla hacer.
@rubengonzalezdominguez3103
Жыл бұрын
Tengo varios desde nissan land rover jeep y toyota pero mi afición son los Mercedes-Benz clásicos y ay si puedo decir que e hecho desde 0 algún Mercedes-Benz que otro simplemente era mi propia opinión sin ofender a nadie ya dije que también está muy wapa la camioneta
@harrystevenson7098
Жыл бұрын
That's a great truck by a very talented fellow you should build and sell those, there definitely built better than the $80,000 truck's their selling today I would give twice that amount before I would buy Gm 's truck's today.
@ozcorr909
Жыл бұрын
beautiful build👍 man you do excellent work
@thehustlebunch7928
Жыл бұрын
What front hubs did you use?
@markbranum5223
Жыл бұрын
What a Super Job, Love the build.
@nathanpearce314
Жыл бұрын
Long live Chevrolet!! ✊
@ramonriveraroman4170
Жыл бұрын
Welcome to the world of fabrication it came out beautiful may you enjoy it for many years to come.
@geezersracing8016
Жыл бұрын
I'd like to see the frame on that rig. I have a 70' GMC C3500 extended wheelbase with a massive frame under it, that I have considered doing the C50 front clip swap on. Just posted a short of it. kzitem.infoGvWwagy3gIo?feature=share
@chapazspeedshop5673
Жыл бұрын
Frame is from a 2010 3500 Chevy cut down in the front, center, and rear all cab and bed mounts were fabricated or cut off the 2010 frame and repositioned
@geezersracing8016
Жыл бұрын
@@chapazspeedshop5673 My heavy extended wheelbase GMC has a rare frame, so I have always been hesitant to change too much. It hasn't got the collector value of a rare truck, but it seems like that can change pretty quick with this body style. kzitem.infoHMrcs7Gjbq0?feature=share
@JohnW1711stock
Жыл бұрын
What chassis did you use? Nice build.
@chapazspeedshop5673
Жыл бұрын
2010 3500 Chevy is what I had to work with
@edwardbremer6322
Жыл бұрын
@chapazspeedshop5673 I notice that most of the real nice builds like yours are not on the original frame, is it because of suspension issues or for lowering it?
@rustyrobinson8027
Жыл бұрын
Looks great
@chetblue4146
Жыл бұрын
Fukin, why...? Now it's end user junk
@chetblue4146
Жыл бұрын
Couldn't love it for what it was. That's why there's museums. Everyone's chopping this stuff up, from old b-body Impalas and medium duty trucks it's freaking sad
@nitrouscatfish5827
Жыл бұрын
One of the very few pickup conversions that look good
@donaldhurst9701
Жыл бұрын
Very Nice build. I'm looking to do a similar build, I'm just starting to source parts. Do you have any pictures of the build that you would be willing to share? Thanks for making the video. Don
@chapazspeedshop5673
Жыл бұрын
All pics are on the video
@rnt-gutierrezgutierrez580
Жыл бұрын
Is it for sale? If so I may be interested.
@tonyharlow630
Жыл бұрын
Great job & choice
@c50ge
Жыл бұрын
I’m building a 68 C50, what did you use for your rear fenders? How did you attach them??
@chapazspeedshop5673
Жыл бұрын
Stock fleet side bed with a step side cut and molded and welded in
Пікірлер