I had the same truck. I remember rounding off the dog bones. I was about 13 yrs old when I built it. I loved this truck. Just the dog bones gave me a lot of trouble and down time
@Trendyrapslut
2 жыл бұрын
i imagine there was an underlying issue that you head for that kind of wear pattern. that is not normal in the slightest.
@christopherreiser1975
2 жыл бұрын
Thanks for the detail T-shirt tip is golden!
@markrenton5791
2 жыл бұрын
i hade this and my drive shaft jumped out all the time. made me so pisst. my friends falcon hade no problems.
@07scoobywrx
2 жыл бұрын
So crazy how far rc cars have came! I remember my first hobby grade rc was a traxxas sledgehammer and back then I thought that thing was fast!!!!! Not today
@thebootybandit629
2 жыл бұрын
just got one of these from my uncle who passed. thank you for teaching me about it
@rcvarna624
2 жыл бұрын
thanks !
@Kyle_v2
2 жыл бұрын
These things are a pain in the ass to put on should have just bought the traxxas ones.
@homeworkpictureshq
2 жыл бұрын
Cool... Just make my new Blackfood video
@jasonmoretski6910
2 жыл бұрын
When you put the Thread locker the parts didn’t bind up because when I put the thread locker on my mipP axles after 10 minutes of driving I cannot move them you have any ideas
@FSX239
3 жыл бұрын
Thanks
@nixorawastaken
3 жыл бұрын
Thanks so much! this helped me with my Rustler 4x4 VXL!
@jorritvermoesen7063
2 жыл бұрын
does it fit the rustler 4x4?
@rc-dom-uk
3 жыл бұрын
Great stuff, subbed. 👍
@DeRock401
3 жыл бұрын
Ever since installing these MIP axles my rear tires are not lining up. They have serious toe in or whatever. It’s not adjustable either
@afrog2666
3 жыл бұрын
My traxxas upgrade shafts broke on wet grass, at around 50% throttle, traxxas needs to up their axle game..
@marshallhom7149
3 жыл бұрын
Got a original Blackfoot, lost my remote, what transmitter are you using
@koenvonseggen9962
3 жыл бұрын
I got these driveshafts and they’re nice and beefy but 2 of the joints don’t rotate that well. Is it just that I didn’t grease it? Do you need to grease the joints and the middle connector piece or what? Just need a little help and man if I could get these driveshafts to roll well, I’d be so happy!
@jasonmoretski6910
3 жыл бұрын
I think you used to much tread locker I Have the same problem
@koenvonseggen9962
3 жыл бұрын
@@jasonmoretski6910 i’ve had some experience with them now and you can do things such as put wd-40 in it and run it for a little bit and that will help, or if you have a tall car such as a stampede like me, you might have to lower your suspension.
@alvinlai2854
3 жыл бұрын
I have the re released
@edwardpardo593
3 жыл бұрын
Gruidyns from puerto rico 🇵🇷 i have thes black foot i gadet a feu days ago
@SpeedSyko
3 жыл бұрын
Just installed these last night. My axles break brand new with one throttle pull and braking 2-3 immediately. Front and rear are different kits for the stampede 4x4 vxl. Great video!
@martinneps9387
4 жыл бұрын
Did you ever purchase any other Blackfoot trucks please comment back
@paulmorris563
4 жыл бұрын
Are you stalking all blackfoot owners in the world?
@chosenone1004
4 жыл бұрын
Look how many years later and this video is still helping people ! I definitely appreciate it I know that ! Thanks bro ! Your someone who actually gets it , knows how to do a real walk through . Thanks again
@gtgromer5232
4 жыл бұрын
Great video!
@mikeinpenna
4 жыл бұрын
Hey nice video, This was my sons first RC truck. Back in the day there were RC tracks every where. I just found his old truck, it's in bad shape with alot of broken pieces. I want to rebuild it and let my grandson play with it. I'm having a hard time trying to locate parts. tried Ebay, the parts I find are missing the ones I need. any idea where to find parts.
@bryantringali8755
4 жыл бұрын
My hero!! Thank you for making this video!! <3
@deborahshanks7848
4 жыл бұрын
In 1986 this truck could come with oil filled shocks as an upgrade option, you could also upgrade the motor to a Technigold. The trucks in the promo videos had these upgrades which you found out pretty quickly after driving the stock version, but those options added about $50 to $100 more on the price and in the mid 80s these weren't cheap. Fun truck and one of the best of the old school monster trucks
@derrickmuntner4895
4 жыл бұрын
Def going to upgrade mine, broke the rear yoke on mine. Great Video!
@ddbrink663
4 жыл бұрын
thanks man..great tutorial
@Antempest
4 жыл бұрын
Very first quality rc truck back in 1988.Had some good time with the foot..
@Mr8perezm
4 жыл бұрын
I have an 1986 Blackfoot, I've just revived it. The front left wheel axel joint just broke a few minutes ago, so disappointed. How am I ever going to replace it the part!? I guess most of the plastics are brittle and can't take the punishment it used to.
@shucksfishslayer
4 жыл бұрын
Just bought these for my rustler 4x4 vxl.
@jman7770
4 жыл бұрын
Okoboji Duggy have a pair coming for mine tomorrow. How did it install on your rustler? Any issues?
@shucksfishslayer
4 жыл бұрын
@@jman7770 just soak in brake cleaner and use locktite. Shouldn't have any issues
@rcn4fun012
4 жыл бұрын
I know its been awhile since you made this, but it still very usefull. Just wanted to give you some well deserved credit for a great video, used it to build the rear CVD's for my 1/10 Summit.
@dannydepino3874
4 жыл бұрын
Great video I have an original from 86 like that one you have there it's in a glass case I'm looking to get the re release as a runner maybe do some mods such a cool truck brings back memories growing up in the 80s was a time like no other.
@bilalbajwa7253
4 жыл бұрын
Can white lithium grease be used?
@Kornatzz
4 жыл бұрын
Does the spur get come with the pads?
@vilniakas
4 жыл бұрын
Yes
@MRCG68
4 жыл бұрын
loooveellyyyy !!
@red7fifty
4 жыл бұрын
Ditch that HobbyKing Battery....learn how to solder so you don't have F'n Electrical tape on the wires, and throw that POS Traxxas Shit in the garbage. Shame on you.
@red7fifty
4 жыл бұрын
Oh, and turn your fucking phone off, or put on silent. Jeeze. :)
@scottgleason4511
4 жыл бұрын
I still have mine but no shafts do they make a retro fit or anything like that
@thecandyman9308
4 жыл бұрын
In 1989 I was obsessed w/ this thing. Never did get one. Maybe one day. 😊
@darrylquiambao2860
4 жыл бұрын
Did you upgrade? Coz mine was tamiya blackfoot 1986 which is the real original and it doesn’t look like that.. rear suspension is upright and tires have spikes..
@LukesVintageRC
5 жыл бұрын
Awesome truck good sir love these. Definitely subscribed 👍
@car_detailing0327
5 жыл бұрын
We’re do I grease it at
@85justintime
5 жыл бұрын
Hey man that so much for making this, it was super helpful.
@jdmikeg4
5 жыл бұрын
Omg The stock drive shafts are probably the absolute worst invention in the history of rc cars. I remember spending like 18 hours straight non stop no sleeping putting together my Blackfoot and went out to run it and within 5 minutes the drive shafts were completely stripped. I did not get new dog bones for like a month because back then I had no money and to order a part, I had to write a hand written letter with the cash in the envelope and hope they don’t keep just my cash. (There was no ebay back then, you had to order parts through snail mail). Eventually I finally got the dog bones. This was way back like 1990 or 1991. Memories...
@emgee44
5 жыл бұрын
My first proper RC car and I still have it. Haven’t driven it in years mind you, I up graded the shocks to the oils filled ones, ball bearings all round and upgraded the motor, not that I saw a difference. Fun car .
@charlesbaril3038
5 жыл бұрын
where to find a servo and receiver and controller compatible with the mechanical speed control?
@RynoJ5
5 жыл бұрын
Good video but when I drove mine just now, it had a clicking noise when I turned idk what’s wrong with it.
@troyschoeneberg1901
5 жыл бұрын
You have to grease the joints. I would grease the shafts too. Without boots youll need to regrease them every run if your in water or samd. Im new to rc, but ive worked powersprts my whole life and it all works the same.
@samuelbrisson2454
5 жыл бұрын
What gear setup and Nice video
@jdmikeg4
5 жыл бұрын
I never upgraded my Blackfoot back in 1991 cus the electronic speed controllers were freaking $100 bucks and I'm 15 years old.
Пікірлер