A cosa servono le 2 rotelle ai fianchi che muovi ?
@MrCstone1
7 ай бұрын
Have you automated this yet?
@thefix2573
8 ай бұрын
Pro Level Bro! Good Job.
@johnbutler5208
8 ай бұрын
Burning wood gas. Very nice
@hairlessmonkey2240
9 ай бұрын
Awesome!
@1943L
10 ай бұрын
Great to see the secondary air being drawn in when the primary air to the grate is reduced. Nice job.
@racif
10 ай бұрын
Seeing the second burn is quite satisfying. Nice job.
@charlesangell_bulmtl
Жыл бұрын
Nice setup with 1 nit... The welds My cheap ass does CO2 shielded MIG on thin household Chinese steel salvage, I recommend it for practice as the stuff has horrible paint that will test your skills. I have 1 arm .... General rule of thumb, each leg(not the face of fillet)1.5 x thickness of thinnest material MAX In this case 1/2 of weld material volume would suit as stress is minimal With practice you will find directing flow to thicker piece and washing onto thinner helps control heat. Cheers👍
@stevelindsay3643
Жыл бұрын
Great job, Denny. Looks like it works extremely well.
@fryloc359
Жыл бұрын
How do you get the secondary burn to work? Mine never does.
@jhiggz9258
Жыл бұрын
Love that long slow secondary flame, a beautiful thing, not an easy thing to achieve. Nice work.
@MRSketch09
Жыл бұрын
Well I ended up here b/c I was thinking of tackling building a wood stove. I have one right now, but it's old & inefficient. I wish I'd just thought to read the description before watching the vid, b/c I was waiting for you to talk and EXPLAIN what was going on, lol..
@MrBillmechanic
Жыл бұрын
nice job. will study your work to see if i can benefit. thanks.
@miked8227
Жыл бұрын
Sometimes I’m just mesmerized by the dancing flames of our secondary burn insert which is raised off the floor like yours. Just upgraded the stove this year at cabin.
@judyheald6
Жыл бұрын
Iv never seen one work so well. That's so impressive, it looks like gas coming out of the air holes it's working that well.... hmm to convert or not.....
@navneetkalra8067
Жыл бұрын
Very Nice 👍
@michaelthomas7898
Жыл бұрын
What a completely useless video. Where did you pull your air? How are you preheating the combustion air?
@oldsteamguy
Жыл бұрын
looks good
@grazianotartari951
2 жыл бұрын
Vorrei sapere se è possibile come si smonta il deflettore che si trova nella camera di combustione nella parte superiore, grazie tante
@TimpBizkit
2 жыл бұрын
I spend ages just watching it burn like those fireplace videos.
@clarencehopkins7832
2 жыл бұрын
Excellent stuff bro
@clarencehopkins7832
2 жыл бұрын
Excellent stuff bro
@dennisgunn468
2 жыл бұрын
Stove but the burning question here is: how did you get away with using the the Talking Heads?
@UToobSteak
2 жыл бұрын
You've got some serious skills Denny. The stove is beautiful, and you saved it from ending up in a landfill. Well done! We just bought a secondary air stove. It amazes me when there is no smoke coming out of the chimney. It's so cool
@ebry8225
2 жыл бұрын
Wow! That is excellent! I realize this is an old video but has to be said, again. Great work here!
@calholli
2 жыл бұрын
It's interesting to see it in action.. Now I'm just wondering how to implement this into my barrel stove. lol.. It's so deep and the door is kinda small-- it's hard to reach into the back and bolt things.
@claudion7659
2 жыл бұрын
IM looking samethink lake that.
@latitudeash
2 жыл бұрын
How much wood does it burn? Is it efficient? I have a stove and the glass always soots up and it has an air wash. Soots up when we close the air so we get a slow long lasting burn at night. If I open all the vents it works well lots off heat and clean glass on door but the wood would burn out in 1hr easy. Hence my question. It has to be efferent and produce heat with little wood. I think I use 9 x 10inches long chopped wood from the afternoon to late night.
@johnmccrae1102
2 жыл бұрын
Hate the stupid and unnecessary music.Watched for one minute
@voidisyinyangvoidisyinyang885
2 жыл бұрын
What I did was click on the mute button. And I'm still watching now!
@robertjackson1407
2 жыл бұрын
Thank you 😊
@hk93shooter
2 жыл бұрын
it almost looks like a propane burner. all that extra heat being made just from the super heated air. thats awesome.
@johnmccrae1102
2 жыл бұрын
Difficult to understand.Stupid backing music
@voidisyinyangvoidisyinyang885
2 жыл бұрын
clicking on the mute button can help your understanding.
@seoulkidd1
2 жыл бұрын
I like the burn system on the solo stove very simple. Waiting for someone to mod it into a stove.
@scottdarichuk1436
2 жыл бұрын
now that's sweet!
@Tom-Lahaye
2 жыл бұрын
The design seems to work very well, the flames burning from the secondary air holes tell it all. As mentioned by others, you could provide an outside air source. That would be a very easy alteration for the secondary air, remove the pipes which run under the stove and make an air box from large box section at the rear bottom end of the tubes. Feed in air from outside via a 80mm spiral duct straight trough the wall, provide a bit of downslope to the outside to keep rain and condensation out, a vent cover with mesh needs to be provided to keep rodents out. For the primary air it's a bit more involving on this stove as you don't want unsightly air ducts to the regulators on the side, maybe close these off and make a steel duct on the inside of the stove to your primary air ring, and the regulator on the back.
@skippyone2769
3 жыл бұрын
Great job, now how many tons of logs does it burn a week ?
@vladimirbondaletov2767
3 жыл бұрын
печь работает до сих пор?
@georgestyer2153
3 жыл бұрын
Nice idea but...cut the musak.
@voidisyinyangvoidisyinyang885
2 жыл бұрын
I had to click on the mute button. I'm still recovering from the effort I undertook in that endeavor.
@georgestyer2153
2 жыл бұрын
@@voidisyinyangvoidisyinyang885 Thanks for your comment...but...I would have liked a commentry on such a super job
@hockeyslade
3 жыл бұрын
Wow. Very nice.
@comonbabylightmyfireburn
3 жыл бұрын
Great Job! Well done.
@jorgegalvana.7413
3 жыл бұрын
Hypnotic! It fascinates me to see how the secondary burner works and how hell resumes at the top. It's just great.👍👍👍
@Toddster81
3 жыл бұрын
Very nice, boy the glass doors made all the difference! And adding the secondary burn tubes made it more efficient. I like it!
@thegrantdanielsband
3 жыл бұрын
Awesome but i had to get rid of my old stove and get a new one that's EPA approved or i could not get house insurance also wet certified!! So if you use these old stoves even in a shop check with your insurance company if it is allowed or you might find yourself with no insurance when you need it just saying Cheers :-)
@eacars9356
3 жыл бұрын
Excellent song choice! "Burning down the house"
@752brickie
3 жыл бұрын
Do ya think your baffle plate is heavy enough ? Wow you did an absolutely amazing job on this old stove !!! I sold stoves for years and I have to tell you what you have done to this old stove is out of this world !!!! Thank you for the wonderful video ! Your neoceram front stays cleaner than my old Avalon 1190 that has the new technology ! You my friend are a mechanical genius !
@voidisyinyangvoidisyinyang885
2 жыл бұрын
if he used ceramic insulation it's good for over 2000 F.
@752brickie
2 жыл бұрын
@@voidisyinyangvoidisyinyang885 Yeah we used a boat load of the Kao Wool over the years. It is amazing stuff!! I had an old Lopi in the basement years ago that just had a straight through with out much of a baffle . I placed a sheet of steel and some kao Wool on top of it and it made an amazing difference. You are 100% correct it is a great insulator.
@jonlast4433
3 жыл бұрын
Sorry I had to find a video with some tech info. So boring to watch flames more then 2 second. All I heard was heavy breathing like someone is getting excited (gross)???
@moonolyth
3 жыл бұрын
Yup one of the better distributions I've seen great secondary
@workinalday4351
3 жыл бұрын
My concern with this was the material chosen! He gets rid of the thin plate heat shield in the system and replaces with much thicker steel. Which I used to think was the way to go years ago, but now realize that the thicker usually means higher carbon steel, and that melts in your stove over time. I have an old Hitzer and that's exactly what happened in my stove, the thin steel is still fine, because it's extremely low carbon steel, it takes high heat without issue. However the thicker steel to make up the inside frame has a higher carbon content and I have literally turned that stuff into molten liquid metal and have already had to replace several times. Also he is using some cheap Zinc Oxide bolts on this you can tell by the color, that's 1 toxic once heated, and it's not a coating on those if you have ever cut through them, that goes straight through the bolt, and 2 they don't hold up to heat well at all.
@voidisyinyangvoidisyinyang885
2 жыл бұрын
He replaced the baffle with ceramic fiber board insulation good to over 2000 F
Пікірлер