What if it is glued to another one going 90 degrees? How do you release the joint?
@AnaHernandez-if7ny
9 күн бұрын
My door gets stacked I has to move it back and forth It gets trap on the top What could I do?
@artsal
27 күн бұрын
Really helpful thanks so much
@meemiekemper1852
Ай бұрын
Thanks, Mr. Noodle! Very informative. I did bend the Schluter trim, but didn't cut back in far enough, so got a rounded corner. Easy enough to trim the corner of the tile to fit and I like the curved edge!
@o-o5866
Ай бұрын
My names jif
@lauradahlus
2 ай бұрын
That's called an oscillating tool ..😋
@michaelriddle7901
3 ай бұрын
Where’s the magnetic device at ? Is that what it’s called?
@lauradahlus
2 ай бұрын
Do you have a hard drive? There are strong magnets in them.
@thisisnotme4404
3 ай бұрын
was video operator a woman?
@jamesfoss419
3 ай бұрын
Nice video, good advice, but please don’t swing a hammer like that. Again, good and thorough advice, but choke up on that hammer…. just don’t swing it like that. Practice and you’ll get better. I’m not trying to be mean and I liked your video, but them hammer skills have to improve. You can do it!
@wadoit46
4 ай бұрын
My counter has that old metal across the top and a metal strip where the counter meats the back 4 in pc. We cannot get it off.
@feliciaruncie9681
4 ай бұрын
As most comments already said, thank you for a great instructional video that included hidden problems we might encounter. Much appreciated!
@on4acres
4 ай бұрын
What can you use in leu of those shims? I couldn’t find those at the hardware store.
@edgarpadilla01
5 ай бұрын
What size Schluter did you use ?
@christineriegler9742
6 ай бұрын
I love the bloopers at the end. Gives it character and makes it fun
@jmaintains7005
7 ай бұрын
Need to make sure tile isn’t set over those outlets, need to loosen them so the tile sits behind the flanges on the outlet. That way you can change them in the future and your covers sit properly.
@WilliamLombardi-o4y
7 ай бұрын
Replace 39 year old pocket boor has different hardware 3:28
@hanslain9729
7 ай бұрын
Something about someone occasionally dropping an f-bomb... I seem to trust them more. Very informative video. Thank you!
@jriffey6183
7 ай бұрын
I want to see Steve damn it!
@robinsymonds5353
7 ай бұрын
Glad it's somebody home 😂
@robinsymonds5353
7 ай бұрын
This guy is lost
@howardsackson7378
7 ай бұрын
Awesome video. I followed your instructions for bending the Schluter and it came out great. Thanks!!
@erwinmendoza-mx2vl
7 ай бұрын
My name is Jeff !!! 😅
@tm6196
8 ай бұрын
V good instructional video….. But there must be a better way to design this, so the future repairs are not so painful….. I’ve to help a friend tomorrow to tackle the issue…….
@carolwsherman
8 ай бұрын
How much can you sell granite level 1 ubatuba? I will have som nice pieces
@thomasflores7817
8 ай бұрын
Wheres that refacing series?
@cinthyadardon7205
8 ай бұрын
Thank you. Super helpful. Muchas gracias, nos salvó el día. You saved the day for us.
@jacobseidman8269
9 ай бұрын
Where do i get one of those echo hammers
@alicabban6327
9 ай бұрын
Thanks … this is Uber helpful
@paulmonk7820
10 ай бұрын
Don't know the wood you used to fill the screw holes, hope it was hard like oak. 😊
@paulmonk7820
10 ай бұрын
Suggestion: In order to make it easier to remove the door, place a dowel rod or something similar under the door to make it easy to move it.😊
@ebear7658
10 ай бұрын
This is an excellent demonstration of how to remove, repair and reinstall a pocket door. However, if you go to all this trouble, I would invest the $10 in a new set of tractors (rollers).
@teresastephens2642
10 ай бұрын
It's a "knife" not a spatula. Otherwise, pretty good video.
@thewishmastur
11 ай бұрын
Just use screws so you can take those trims out next time without too much hassles. It is going to come out again eventually
@littlehoss
11 ай бұрын
The main reason to use "painters caulk" (or Window and trim sealant) is because it can be painted. If you attempt to use a silicone sealant intended for kitchens and baths, they repel water and will also repel your paint.
@UloveRonnie
11 ай бұрын
Wow. Amazing! This was really interesting to see.
@mdmenzel
11 ай бұрын
Mine is stuck in the closed position and it is access to an ensuite bathroom so there's no way to be on the other side. 😢
@hayleylewis6103
Жыл бұрын
What our it's sick ALL the way inside the pocket?
@canopyhardwood1997
Жыл бұрын
Where do buy the magnet?
@irritablysavvy
Жыл бұрын
This just reminds me how much I hate renovation work and home repair, but yet here I am still doing it. Too cheap I suppose.
@laurenbethshaw
Жыл бұрын
HI- Is there any way to remove a factory preglued counter top . the top is cracked and I am trying just to replace it and not the base- irs from Wayfair
@craigvondersaar5602
Жыл бұрын
I am removing a countertop that has a sink hole cut out, is there any suggestions for bracing the bottom of the countertop with some type of support?
@shelleyaustin6067
Жыл бұрын
Anyone have advice about how to store and move the slabs without breaking?
@tyneeminn8437
Жыл бұрын
Thank you!
@karlabrooks2255
Жыл бұрын
Also the reason for the repair is the back roller is off. The hardware is designed for front roller to go on outside track and back roller goes on the opposite side of the track.
@karlabrooks2255
Жыл бұрын
My boyfriend has made a tool to reach back and unscrew the set screw. He welded a long piece onto the wrench. We will see if it works. I think the hardware was put on wrong in the beginning. I think both front and back rollers should be on the same track. Because you can't get the %$$%% back on track! I'll let you know if it works.
@karlabrooks2255
Жыл бұрын
I have a pocket door that is stuck. There is an adjustment screw on the back roller. It is keeping me from removing the door. I am trying not to cut the sheet rock. Any suggestions? I call pull it out until that back adjustment scew hits the wall stud. I don't know what else to do. Any help would be greatly appreciated
@janetsadeghi1501
Жыл бұрын
What is the pryer thing called?
@michaelfatino9837
Жыл бұрын
Thank you. I didn’t notice if there was an adjustment on that hardware of the pocket door. It looks like there is a ratchet step bar on the hardware. Can you relate if that can be adjusted up or down if the wheels are still on the truck for a better riding door.
@TheDatasmith
Жыл бұрын
Great video! I have L shaped. Is it feasible to raise granite at one end, so that cabinet section can be replaced without removing entire counter to avoid damage. L is 6' x 2.5 & 10' x 2.5 = heavy
@donbeckwith9367
Жыл бұрын
Thank you In years past I actually cut the drywall to access the rollers. This time I got the door out and back in three hours! However, you might add on item to your video. Sometimes when a door is sagging, like mine was, the track simply needs tightening. I could have done that without removing any trim.
@hannahrodero-ortega4025
Жыл бұрын
Hi! Beginner here, just curious is it not possible to just unscrew by using a screwdriver for removing that screw?
@adamb1453
Жыл бұрын
The screws are screwed in to the plywood from the top. You cannot unscrew from the bottom.
Пікірлер