Crimp in fog supply to nozzle tube. Shortened 1/4” all better. Took it off by: unscrew w T6 driver, open clamshell, lift up black air nozzle and motor. Keep an eye out- fan shaft to nozzle shaft has a spring. Locate 2 to 1 white connector. Press in to release single tube. Extract and trim. Replace. THANKS to the guy below who figured the subtle crimp out. Was $100 now $30. Shame on you Ryobi Corporate QA management for not catching it. Thanks for selling Mfg defect at reduced price.😂
@patambre902
Жыл бұрын
Trying another one…first one was identical - no chem dispersal.
@joseamador1539
Жыл бұрын
💩
@josefraire8177
Жыл бұрын
There’s a hose that comes from the pump out to the spray point, that the way it’s placed it’s kind of kinked. What I did was cut about half inch to relieve some of that kink so that pressure could be released, and it started working perfectly….. I only noticed that house being linked because I opened unit so that I could repair the leak it had going on with that cheap Y-quick connect, once I did that and shortened the hose it has been working fine….. all you need is a T-15 bit to remove 6 screws.
@rareclones
Жыл бұрын
Same shit we got
@excellifestyle
Жыл бұрын
Mine did the same thing. (And it's not the o-ring for all the "read the instructions" geniuses) 🧐. It's basically a jiggle pump😂. I'm going to exchange it and see what happens
@mondavou9408
Жыл бұрын
Thanks for posting. Actually seeing what a lot of folks are writing about in the Amazon reviews, just brings it home in a more disappointing way. Plus, several of the "me too" comments here, makes this a "no go" for me. I appreciate you saving me the time and frustration.
@nofellr2579
Жыл бұрын
I’m returning mine
@waldenli5750
Жыл бұрын
I have same problem, still doesn’t how to fix the stream spray problem
@frozenfan1850
Жыл бұрын
Can this be used for indoor pest control?
@toddstewart205
Жыл бұрын
How is this a review? You obviously dont know anything about this fogger! Get a copy of reviews for dummys
@shiningone3538
Жыл бұрын
Yep... Very disappointed in mine to
@jeffkraus1457
Жыл бұрын
This tank is a pressurized tank. The pressure from the pump pressurizes the tank and forces the liquid out. The tank needs to be airtight. If u did not install the o ring the tank will not be airtight and the sprayer will not work. When u tilted the sprayer back the liquid in the tank worked as a seal for the cap and u got intermittent weak spraying. Simple fix...READ THE DIRECTIONS!!!
@carterm7265
Жыл бұрын
Though I appreciate the response “simple fix” is not a simple fix when the O-ring was installed and directions were fully read.
@briancolorado6448
Жыл бұрын
Oring was installed, read the comments!
@ZeusKingOfAllGods
Жыл бұрын
@@briancolorado6448maybe he put the ring in backwards. Or maybe the ring is metric and us Americans just don't understand.
@jeffkraus1457
Жыл бұрын
Bet u didn't install the o ring in the tank cap!
@esava2874
Жыл бұрын
Stop already with the O Ring in the cap comments....if you have one like I do the O Ring is ALREADY installed inside the cap from the factory...
@barryliu8
2 жыл бұрын
I've tried using mine today and it's the exact same thing. I used up 2x 4amp batteries and the tank is still 3/4 full and I actually went over my half-acre landscape and thought I finally finished fogging it. Then I realized I've had wasted my entire afternoon on this piece of junk blowing through my landscape with a very loud fan.
@jeffkraus1457
Жыл бұрын
Also, install the cap O ring! Read the directions!!
@ahughes33
2 жыл бұрын
Any follow up to this? I just got one today and it's doing exactly the same thing that yours was doing.
@GetCart3rCA
2 жыл бұрын
I ended up returning the item. I could not get it to work. I happen to find the backpack Ryobi electrostatic sprayer which has worked but I have an issue where sometime it won’t pull from the bottle. I’m going to buy new hose ends and find a short similar length hose to see if that fixes the issue. Seems like a couplet issue to me.
@ryancoplan4671
2 жыл бұрын
The chemical fill cap must be securely tightened. If it is and getting no spray exchange it.
@jeffkraus1457
Жыл бұрын
@@ryancoplan4671 Also, install the cap O ring! Read the directions!!
@trumpnation896
3 жыл бұрын
My fogger works fine, Lowe’s and HD where both out of the cutter so I stopped by Tractor Supply and they carry 64 oz size for $15.97. If they are out they will ship. So far it must be working. We have those ankle bitters and haven’t had a bit in four days. I fog once in the morning and once in the evening. You have to keep a pattern to disrupt the mosquito breeding cycle.
@DonaldHTyers
3 жыл бұрын
I purchased one and it is total junk!
@dboy900
3 жыл бұрын
I have the same problem. Either the solution is too think or the filter is clogged. After going to the trouble shooting process I’m going to to return the item and get another one. I think we both have a faulty product.
@jeffkraus1457
Жыл бұрын
Also, install the cap O ring! Read the directions!!
Пікірлер