that's pretty awesome. the rapids are great, but you can still see the machine shake a little bit on the long rapids when it starts clearing the corners.
@normankowalczyk4070
3 ай бұрын
The shaking in this video is from the camera being mounted on the door. In my other videos with the camera mounted on the Microarc you can see the motion is smoother
@justRD1
3 ай бұрын
@@normankowalczyk4070 i was watching the shadow of the cords in the upper left, and yes I see it is mostly the door moving.
@Muny
3 ай бұрын
Those rapids are fast! Tormach has really stepped it up.
@SmallShopConcepts
4 ай бұрын
near the end of the video when the adaptive tool path is repositioning is the machine shaking? asking becaue mine does this on those same repositioning moves using linuxcnc which is the same platform as pathpilot. i recall tormach stating that the new version release with this machine had a new trajectory planner for high speed machining, but it appears they have not yet sorted out the rapid short line segment moves quite yet. i ended up using the stay down least setting so it would reposition in z and make straight line moves to avoid that nasty shake which can't be easy on the wear susceptible motion mechanical components. just thought i would ask and recommend until they get it sorted maybe to try the stay down least setting in fusion (if that is what you are using).
@normankowalczyk4070
4 ай бұрын
The enclosure shakes with quick direction changes, but the base/table are solid. In this video I had the camera mounted on a small steel strip that holds the door window, but it's not very secure. There are some wall control bins with bolts and parallels on the enclosure right behind the camera that are rattling a bit, too. For a better idea of just the machines motion look at the 4th axis fixture video I uploaded, especially from 1:15 to 2:00. In that video I had the camera mounted on the 4th axis's body.
@ronson66
4 ай бұрын
Is this the base model without ATC?
@normankowalczyk4070
4 ай бұрын
There is an ATC installed on this machine, but it's the alpha ATC that has been hacked on many times and isn't function right now
@AIM54A
4 ай бұрын
Can you use the wired tool setter and probe with this system.. Or only the wireless option?
@normankowalczyk4070
4 ай бұрын
Only wireless, at least for now
@ryannimal6077
4 ай бұрын
That return tool path was interesting.
@billbaggins9961
4 ай бұрын
would help out if you could show the machined part so we could see how well it did. I just watched a shower of coolant for 31/2 minutes
@normankowalczyk4070
4 ай бұрын
Thanks for the comment. I recorded this video a few months ago and this was the only shot I had, so for this part the option was 3 1/2 minutes of coolant or nothing. The point was to just put the speeds and feeds with the sound of the machine running. In the boot video I did I got a shot of the finished part.
@Sinarglondong
4 ай бұрын
Very goood❤❤❤❤
@backrdfpv705
5 ай бұрын
Keep ‘em comin’!
@starbrightpools
5 ай бұрын
Look at those chips fly 😎
@michaelalcocer6778
5 ай бұрын
Why double tool length probes on the table?
@normankowalczyk4070
5 ай бұрын
The closer one had it's glass cracked by a beta tester who had a part come loose, they reported it worked intermittently after that. I just have it in there to expose it to coolant and I'll test it when I have some free time
@steve0stang
5 ай бұрын
Great work! what was the total cycle time? great finish at the end!
@normankowalczyk4070
5 ай бұрын
Around 4 hours. This was a program I inherited though and the surfacing was only 75 ipm. I'd at least double that and it'd probably be between 2 and 3 hours.
@ammo1033
5 ай бұрын
It appears that Tormach has stepped up their game significantly. Less of a snail pace, hobby machine into an actual usable machine finally something more than 2 hp.
@rampage5275
5 ай бұрын
Nice vid. Appreciate you showing how this new machine performs.
@jameslee522
5 ай бұрын
Is this machine on single phase power?
@normankowalczyk4070
5 ай бұрын
Yes, it is
@bbcnc4756
5 ай бұрын
Man, that cut sounds great, sound like machine is rigid, LOVE IT !
Пікірлер