That all foam material upper/middle and dust cover..i replaced modified with black rubber..no more weak soft foam... more realiable....
@nikmohdrostamniksoh4457
2 ай бұрын
Hi sir...after replacement upper and lower mounting do we need to do tire allignment?
@waqassiddiqui8796
26 күн бұрын
No you don’t need to.
@harmangidda6161
3 ай бұрын
At 1:04 right under the top mount, there is like a flanged part that's rusted. Is that the part that broke from the metal cap? If so, did you remove it because I didn't see it again in the video. Also, is it necessary to change the shocks too because I had mine done less than 4 years ago...
@waqassiddiqui8796
26 күн бұрын
You can just replace the rusted part, not necessary to replace the shock.
@SluggerJai
7 ай бұрын
Hey question what tool did you use to get the bolt off ?
@waqassiddiqui8796
7 ай бұрын
The top one? I think a 10 mm maybe smaller socket + a wrench (i used an adjustable one) to lock it. The bottom one was just a Bolt and I had to lock it with a wrench
@waqassiddiqui8796
10 ай бұрын
Strut mount kit. www.amazon.ca/KYB-SM5752-Strut-Mount-Kit/dp/B01GQ8D60A/ref=asc_df_B01GQ8D60A/?tag=googlemobshop-20&linkCode=df0&hvadid=292997173836&hvpos=&hvnetw=g&hvrand=13779184375353663863&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9000812&hvtargid=pla-587941011581&psc=1&mcid=38b7477c78413d66bd4b2804ab847601
@dolo_kaayy
10 ай бұрын
and that shock dust cover is that supposed to be able to move up and down?
@waqassiddiqui8796
10 ай бұрын
No, it sits on top. You could tape it, it protects against dust and mud going in
@dolo_kaayy
10 ай бұрын
what’s the parts called that i have to buy? i search but nothing comes up for my car🤦🏽♀️ i have a 2010 323i
@waqassiddiqui8796
10 ай бұрын
Strut mounting kit
@Key-z2x
6 ай бұрын
Its called this knots
@joshcatalano5127
10 ай бұрын
Did mine yesterday but the top bit wouldn’t come through e ouch for je to screw the bolt on didn’t seem like there was enough thread to catch it tried pushing it up any ideas?
@sforist
10 ай бұрын
Put a bunch of weight in the trunk, that should squat it down a bit.
@waqassiddiqui8796
10 ай бұрын
You need to use a jack under the rotor and push it up!
@sharat1987
11 ай бұрын
Finally found the video I was looking for. Going to fix my BME 328i broken mount issue tomorrow.
@waqassiddiqui8796
10 ай бұрын
Best of luck! It is rather easy
@gh4121-b5n
Жыл бұрын
Nut cases driving on the 401 texting, or reading email.
@Youtype1
Жыл бұрын
Thanks. I was so lost when I was fixing my shock absorber
@paulmcevoy5529
Жыл бұрын
Great video....mine did it yesterday...a COMPLETE list of what is needed would have been super helpful.
@jaylee5061
Жыл бұрын
Top strut Mounting
@jakobbecker6435
10 ай бұрын
Fcp has a great kit
@waqassiddiqui8796
10 ай бұрын
I don’t know the parts, got them from a store by spraying pictures.
@johnchadbone
Жыл бұрын
Good job, thanks bud, mine went through today, i hit a pothole doing 70, heard a massive bang, pulled over to have a look about, all seemed ok until i drove away, then the knocking started and backend was all over the place. Ordered new parts will fit when get here
@urbanmacdonald7901
2 жыл бұрын
Typical Toronto drivers absolute freaking idiots
@eligebrown8998
2 жыл бұрын
Van driver and the guy with the camera is driving like a dusch bag to. To bad they didn't wreck
@kevinfakename7919
2 жыл бұрын
You are a terrible driver yourself lmao
@RRBDDrivingSchool
4 жыл бұрын
hey Waqas Siddiqui may i use this video in my compilation of driving fails? any update,comment?why did this happened?
@waqassiddiqui8796
4 жыл бұрын
No idea just happened in front of me. You can use it
@RRBDDrivingSchool
4 жыл бұрын
@@waqassiddiqui8796 thank you
@samula9999
4 жыл бұрын
mmmm---scary----this happened in 2017--is this date correct??
@waqassiddiqui8796
4 жыл бұрын
I dont think the time and date is accurate but the year is :)
Пікірлер