Hernandez Sarah Martinez Matthew Smith Christopher
@melmenterefordres5079
6 күн бұрын
Thompson Charles Young Richard Lewis Jennifer
@WhittierLesley-c6t
10 күн бұрын
Taylor Jennifer Martinez Matthew Lopez Lisa
@Stan_James
13 күн бұрын
Cheers for vid mate 👍I've been using the 2.1 beta version for a few days now, very happy so far especially now i can test the Curve function on my F1 Ultra 👍
@josephpotterf9459
16 күн бұрын
Thanks note : in general watching the mouse and seeing what you clicked on but not knowing right and left mouse clicks and why you chose that option makes it hard to follow. You as the presenter know all the steps ... not criticizing and i'm a novice just trying to help. that said you have helped me immensely subbed liked n hit the bell. Thanks again
@josephpotterf9459
19 күн бұрын
Thanks this stuff isn't easy to do ...(explaining what your doing on a program and doing a video as well) it is helpful! I just got the f1 and took 4 days to get it to work with my iphone 14 pro. 3 days with xtool techs . Their directions turns out leave out a step and i accidently got it to work..Thanks I hope you want to make more of them.
@17monkeybaby
19 күн бұрын
Hey. Really nice video. Down to earth presentation. Curious what I'm doing wrong if getting error of "No object detected in xcs v. 2.0.117. " I have a canvas open and basswood in the machine.
@benhenry4039
18 күн бұрын
you either need to set your height our you have your image set to not out put. Upper let corner
@jenniebegracedbydesign9731
Ай бұрын
Hey there! So glad you did this! I will follow, i hadnt seen you before. Question, I have had an issue running my F1 and P2 at the same time, connect by cables. If I try to switch to create another design, it wont let me switch, it stayed on the F1. I was running business cards on the F1 and tried to cut my Christmas ornaments on the P2 and everytime I tried to switch, it flickered and kept going to F1. I had to pull in another PC to run. I was super bummed.
@benhenry4039
18 күн бұрын
Can you run on wifi? I run all my lasers on wifi with no issues. or one on cable and one wifi. I know there is limitation on how the data is sent out when connect cause xcs only likes a certain port (com port 3)
@zyalan1
Ай бұрын
Thank you! This helps.
@wilkit1
Ай бұрын
It’s awful software for what you pay for a unit. It reminds me of Microsoft paint.
@benhenry4039
Ай бұрын
That is your opinion. Yes it does need more work to do raw out of the box drawings. But to edit and minuplute a file it does a fine job.
@nancy2371
Ай бұрын
Can the S1 pass through be used manually?
@benhenry4039
Ай бұрын
Yes
@nancy2371
Ай бұрын
Can you see my question
@benhenry4039
Ай бұрын
i can now. Just missed it yesterday
@nancy2371
Ай бұрын
Random question to topic at hand. If tried to get help in Xtool group's and directly with Xtool bit no one has been able to help. I cant get my bitton to work on the F1. Anyone have a suggestion on how to make it work?
@benhenry4039
Ай бұрын
message me at ben henry i am in the F1 group. if i can hep i will find some one who can
@norcalembroidery1626
Ай бұрын
thanks
@cobrawoodworks7686
Ай бұрын
This video was incredible! I would love to see you go more in depth with some of the features you went over. I am entirely brand new to laser engraving and design. Kind of going all in trial by fire. This video has been the best high level tutorial I have been able to find and would love to see you post shorter videos showing different features that you find as essential foundation kind of knowledge/skills to know for a beginner such as myself. Thanks for sharing!
@benhenry4039
Ай бұрын
We will be working on that soon. Shorts are coming
@gregparker5732
2 ай бұрын
It has a long way to go to be as powerful as Lightburn.
@benhenry4039
Ай бұрын
Getting better every month
@gregparker5732
Ай бұрын
@@benhenry4039 At the rate their going they will never catch up. LB is adding features regularly.
@JosephWerle-je4ww
2 ай бұрын
Good Job demonstrating Ben. Shows the software is slowly getting better with each update. Thanks for the good info you are sharing.
@robbrown6667
2 ай бұрын
Your volume is very low. Can hardly hear you on my laptop,
@benhenry4039
2 ай бұрын
thanks for the comment. I will check into it
@sandishoemaker8076
2 ай бұрын
Can you go to new version on one computer and still have old version on a laptop
@benhenry4039
2 ай бұрын
no you can't
@leeverrall7801
2 ай бұрын
Leading is pronounced LEDING, it refers to the strips of lead that typesetters used to put between the letters and words in the days of metal typesetting. Good info you gave.
@AustinAlexander13
3 ай бұрын
This is exactly what I’ve been looking for, thank you for making this!
@benhenry4039
3 ай бұрын
Glad it was helpful!
@ach2935
3 ай бұрын
Where do you get it from? All I can see is version 1.7
@benhenry4039
3 ай бұрын
Off the Xtool website. www.xtool.com/pages/software
@vickieroddy4761
3 ай бұрын
Thanks for doing this! I have not downloaded 2.0 yet! I just hated to since I've finally become confident in using XCS and have been using it a lot more. After watching this, I feel like I could do so much more without having to go to my other software for help with certain things. :) I absolutely love that you can have so many canvases open at the same time! Im wondering though, is it possible to copy and paste from one canvas to another?
@dannylee80
3 ай бұрын
That's your KZitem live virginity gone. It's like a tube of Pringles, once you pop you can't stop. It the easy sailing after the 1st one, thanks for your time dude.
@SeasonedSoulsLLC
3 ай бұрын
I really appreciate you taking the time to walk through the software.
@JosephWerle-je4ww
3 ай бұрын
Good introduction to this new software. I have been using it since it came out, but I have had to stumble through it. You have shown me many things I haven't discovered yet. Thanks. I'm looking forward to you going into more detail with practical exercises and projects in future videos. Keep up the great work. Thks
Пікірлер