Dude, this is spooky... I'm a hobbyist electronics guy that does this kinda stuff, too, but what's really weird is how similar our voices are. Even my gf assumed this was a video I uploaded.
@calcoin4199
Ай бұрын
@@mikee212 aha Thats crazy the world is full of synchronicitys i always hated my voice in recordings so glad to know theres another person who sounds as dumb as me 😂 jk. Cool stuff though man what sort of things do you experiment with?
@mikee212
Ай бұрын
@@calcoin4199 Ya, I don't like my voice, either. I mostly do digital circuits with microcontrollers, solar charge controllers, etc. Just finished a battery-powered motion detector with autoflash and a wifi camera to catch my daughter sneaking into the fridge after midnight. How about yourself?
@calcoin4199
Ай бұрын
Hell yeah man i got a arduino a few months ago and i did one project with them using it to switch relays for a “tesla" switch but i saw a video where a guy made magnetic bracelets for their chickens and they could let themselves in and out of the coop with a door that can sense the magnet using a Hall effect sensor and arduino so thats my next project but i love solar i live 100% off grid i recycle old 18650s and lithium cells and build my own batteries for my ebikes aswell ! Its good to know there are people who are still useful left on this planet ! 🌍 Keep it up brother maybe make a video people seem to enjoy these things I definitely would! Cheers 🙂
@gideonbarnard7159
2 ай бұрын
Thank you for your video, very interesting
@calcoin4199
2 ай бұрын
No problem!!
@Caesarus2011
4 ай бұрын
Tesla’s patent describe 2 variants fig 3 & 4 where artificial source is used for the plate if it is not high elevated and namely copious amount of UV or x-rays. Easier and safer is to use low wattage mercury vapour light bulb or anything with high UV radiation enclosed in aluminium, but more efficient small cold cathode tube, photomultiplier etc. with small power consumption, diodes are used instead of fast switch and step up transformer, have a close look at the patent and you’ll understand what you need to do to obtain electricity generator 24/7 on demand anywhere. Good luck ! ❤
@calcoin4199
4 ай бұрын
Hell yeah man thanks for the comment! Ill check that patent out with new eyes! Thanks my friend
@calcoin4199
4 ай бұрын
So what you suggest if I understand is a bulb that emits lots of uv radiation so a cfl wouldnt work so well becausevmost of the uv is converted with the phosphor coating i have a few uv water cleaning bulbs i could try i imagine they make a load of uv lol. then i would exite those bulbs for as effeciently as possible surround it in aluminum as the antenna then instead of step up transformer use diode multiplier i hope im understanding correctly! Ill give it a go tomorrow!
@Caesarus2011
4 ай бұрын
@@calcoin4199 yes, you got it pretty much. You can try with UV bulbs but do not expose yourself to radiation, aluminium shield must surround the source and prevent leak of radiation. Not sure if those tubes/bulbs are as efficient as low pressure mercury vapour bulbs as UV radiation from such bulbs or electric arc discharge. Bulbs used for street lightning are the most suited for such application, especially those for low watts. After re reading what I wrote it is quite not clear that preferences for a step up transformer should be a better choice, not diode chain. Diode chain plus capacitors should act as interruptor or frequency generator signal. I have to admit that I read that patent many times and I vent for for free source in first build without understanding what Tesla explain in his patent, but after experiencing with his “pancake” coils I have a better understanding of what the inventor presented in description and he mention his own x-ray tube as a source of radiation. I think the most efficient system I ever seen is presented in a video channel of “what if I did this” user in cosmic radiant energy where I am a subscriber if you check my channel is it is my main source of inspiration for practical applications.
@INVENTOR3
4 ай бұрын
Awesome job! Love the corona discharge. RF can burn :-) Where did you get your plans for the sec exciter circuit, it seems more simple than most I have seen before. I might want to play with that circuit myself :-) I bet you can charge caps quick, wireless, just 2 diodes and a cap, like an AV plug.
@calcoin4199
4 ай бұрын
It is the most simple circuit ive ever made i can make it without looking at the circuit diagram aha ive looked at the sec and this is definitely a very rudementary version of it and can be a little touchy (literally) but if i can post a link here to the diagram i followed or make another video showing it if i cant it is like 5 Parts 1k pot 50 ohm resistor capacitor and diode pretty much any mosfet i havent found one that wont work just need to change the potentiomenter and resistor but i use irf540s irfz44n worked well too. And i added a 1n4148 diode on mosfet gate to drain to protect mosfet makes them last alot longer but i have a video ill post tonight that is charging a 2000uf capacitor pretty quickly. I made a net of sorts around it and gosh does it work but i just need to do some more thinking. Im using copper foil right now in between each diode in the chain i had 4 sections just to test and it lights my 9 watt grow bulbs full brightness off of 4 diodes while before on the plate alone it took like 15 diodes to get it full brightness before and i needed it to be grounded or touching the plate to get full brightness and the diodes started getting very very hot so ill have to add some in parallel because i am hitting the max 200ma of the 1n4148s im thinking of moving the foil out farther away from the coil and leave the diodes close so there is a greater potential difference on each stage of the diode chain /charge pump and maybe switch to iron plates instead of copper foil or alternate materials bit from my experience iron seems to really pick up the feild (learned this by accidentally burnong my self on screwdriver near the coil Ill make a video tonight to explain better hopefully www.google.com/search?q=slayer+exiter+mosfet&rlz=1C9BKJA_enCA1012CA1012&oq=slayer+exiter+mosfet&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIJCAEQABgNGIAEMg0IAhAAGIYDGIAEGIoFMg0IAxAAGIYDGIAEGIoFMgkIBBAhGAoYoAHSAQkxNTExOGowajmoAgCwAgA&hl=en-US&sourceid=chrome-mobile&ie=UTF-8#vhid=coZbffwHChTe6M&vssid=l Heres schematic
@calcoin4199
4 ай бұрын
Thank you for the comments it really is encouraging! Sometimes im not so sure if its worth me tinkering cause i dont know alot but thank you!
@INVENTOR3
4 ай бұрын
@@calcoin4199 Thank you very much for the info. It doesn't matter how much you know, but that you have a good imagination & are very creative :-) Some of the best ideas come from people like you. Keep experimenting! :-)
@calcoin4199
5 ай бұрын
6 harmionic coils honey comb? We will see bigger amp UF diodes=more electron flow? Experiment with me 😊
@INVENTOR3
5 ай бұрын
You did a great job here! :-) I see your using the sec exciter circuit. Thank you soo much for posting these videos. I been thinking about incorporating the sec also. Have you seen Mtech industries on youtube here? He has had a lot of success with his sec tower and diodes. Last weekend i experimented with straight chains of diodes and combinations of plates, but no great results yet. Keep making videos and posting them :-)
@calcoin4199
5 ай бұрын
Yes i am! I had been playing with the slayer circut for a while now but i didnt know it was made by dr stiffler untill like two days ago Very cool stuff! And thank you! I have seen mtechs videos he’s awesome aswell! And do you mean straight chain as in its not zigzaged? Because these look very similar to the cockcroft-walton voltage multipliers minus the capacitors so i wonder if the zig zaging creates capacitance between the legs however small and acts somewhat like a infantile version of a charge pump multiplier. I tried a multiplier with 4 1n4148 diodes by adding. 4 capacitors and it seemed to add a little more juice behind bigger sparks and they were yellow rather than purple sparks indicating more current? The capacitors may be converting some of the cold energy in the static feild lowering the frequency but increasing the current. but the 1n4148s died pretty fast so they definitely arent ideal diodes for the job with what im doing anyways but ill have to order a handful of smaller high frequency capacitors and a few different UF diode types to try aswell and i think possibly having a net like aluminum foil around the whole configuration( the sec and diodes) to concentrate the feilds in a smaller space and improve efficiency because it will have lower parasitic capacitance to the ground and all the ground energy coming up to neutralize the high potential feild would interact with the aluminum foil first and could be re directed into the charge pump (diode chains) and use few in paralell to increase current im not sure exactly just thinking essentially hope any of that makes sense lol 😆 thanks for the comment man and i will post a few more tonight i got a light lit up pretty well off of the two or 4 watts it takes to run the circuit and its a 75 watt COB panel for growing plants! Maybe only 10- 15% lit but still incredible especially with the 4 other 1 and 3 watt lights going at pretty much full brightness!
@INVENTOR3
5 ай бұрын
@@calcoin4199 Oh i will be looking forward to your next video :-) With my diode string, yes, i meant not zig-zag. I hope to get much farther with those experiments this weekend. I did not try yet a few strings in parallel with each other, but now I will try that also this weekend :-) A net like configuration,,, yes a screen around it all. I think that would block your frequencies from going beyond the screen, it should confine the energy. Maybe try a large foil sheet around everything and collect energy from it also. Your on the right track, that's for sure 🙂
@calcoin4199
5 ай бұрын
@@INVENTOR3 very cool i look forward to hearing how it works out i wondered if the zig zag or mhaving them in a line or in a loop had much difference and yes im thinking of a way to paralell them im wondering if simplimg hooking the strings up in paralell may work or add a bridge rectifier to each string to smooth the dc out more then add them in paralell or series might be better with bigger voltage caps. Because in paralell you are limited by your weakest link or diode string And yes idk i will have to try in the next day or two but man i do appreciate the comment thanks! And yes i got the idea from your secret sauce with the plate surrounded in the other plate!
@calcoin4199
5 ай бұрын
@@INVENTOR3 i just posted a new video tonight it was pretty neat what i got going tonight super simple hope you like it
Пікірлер