Is this quiet I have the innovative marine ghost skimmer and I'm ready to throw it in the trash. It's just way to loud ,the tank would be silent without it. Will this work on the innovative marine 14 peninsula ?
@inTankLLC
4 жыл бұрын
Yes - It is a extremely quiet skimmer. Innovative marine products are junk.
@morganciccocioppo4230
4 жыл бұрын
Could you explain better how did you change the magnete position? Thank you so much.
We’re both the steam engine and the diesel engine running in the same day. Because I thought the steam engine depart the station and then you guys went on the diesel engine. I always wait for the steam engine when it’s running
@TheNeuroticArcher
4 жыл бұрын
This is an amazing review! I just installed mine on my 32 Biocube, this was super helpful! Thank you so much.
@Sal-vx5dg
4 жыл бұрын
What chamber did you put it in? Would it fit in the first chamber?
@TheNeuroticArcher
4 жыл бұрын
Sal Diaz Mid chamber, next to my InTank Acrylic filtration upgrade
@williamwiese9963
3 жыл бұрын
How the skimmer still doing? Any good? Looking at these
@williamwiese9963
3 жыл бұрын
Will this be efficient in a 34 gallon reefer??
@gregorymitchell8324
2 жыл бұрын
Will it fit in chamber 1? On the right side when facing towards the tank?
@Alex_Correa
4 жыл бұрын
All I needed to know. Thanks for the video!
@paulbarker3369
6 жыл бұрын
Didn't like it at first after a week it been skimming great
@cram1nblaze
6 жыл бұрын
0:30 did this guy just say he welded plastic?
@inTankLLC
6 жыл бұрын
Yes. With a solvent welding solution called Weldon
@oFallenDemono
6 жыл бұрын
Will this fit a Nuvo Fusion 20?
@inTankLLC
6 жыл бұрын
oFallenDemono Yes. It's been discussed in the comments.
@lostwisdom100
6 жыл бұрын
Could anyone tell me how tall does the collection cup rise above the waterline? thank you.
@inTankLLC
6 жыл бұрын
2-5/8" to 3-1/8" depending on where you set that water level
@lostwisdom100
6 жыл бұрын
thanks for that mate!
@gronko2952
7 жыл бұрын
Should the black part of the skimmer be above the water line coming in ? I can't get my 9001 set for anything
@inTankLLC
7 жыл бұрын
There is a molded water level line on the side of the body, this is the max level that the skimmer can run at. It is about 1/2" below the top of the body. The skimmer works best when the water level is about 1/2" below that water level line, so the skimmer body is about 1" above the water's surface.
@markmelnick4614
7 жыл бұрын
is there a skimmer for a 28G Nano that will fit into one of the side chambers rather than the center chamber? The center chamber of my tank has the filter media piece...sponge, carbon,ceramic pieces...
@gewglesux
7 жыл бұрын
0:32 i know dang well that aint the temp. Here on Long Island you'll get locked up at the shop just for looking at a sled...same for any other motor sport... sux living here...
@inTankLLC
7 жыл бұрын
It was around -14°F that morning.... Too restrictive, we enjoy freedom in Wisconsin.
@gewglesux
7 жыл бұрын
Thats Chilly..... some sleds have heat right? I sure hope you had heat....
@matthewpin
8 жыл бұрын
What was the magnet you used in the IM Nuvo 16 tank for this skimmer? Does the one you sell on your website come with the correct magnet for this tank?
@inTankLLC
8 жыл бұрын
+Matty P The current version of the 9001 comes with a thinner magnet that can be used. Thanks.
@Campingglueck
8 жыл бұрын
Den werde ich mir holen.
@erinqueme7071
5 жыл бұрын
da
@tonyroma1161
9 жыл бұрын
How well does it fit in the red sea max 130d?
@inTankLLC
9 жыл бұрын
Tony Goose Fits perfectly. Most attach to our media basket or the rear wall.
@repanas6
8 жыл бұрын
+inTank, LLC Hi there! I really enjoyed your video. Do you believe that it will also fit in a Sera Biotop Nano Cube 60?
@inTankLLC
8 жыл бұрын
+Alexandros Repanas Sorry we are not familiar with those as they are not popular or distributed in the USA. The dims of the skimmer are: 4 x 2.5 x 8 inches and it needs a minimum of 6" of water to operate.
@repanas6
8 жыл бұрын
+inTank, LLC Thanks for your quick answer!! I will measure the dimensions in the back of the aquarium and see if it fits or not. I hope it does because I really want to get my hands on the 9001.
@williamwiese9963
3 жыл бұрын
How did this skimmer work for you? Any good?
@gcpbg
9 жыл бұрын
Hi Steve. Great video. Where would you place this skimmer in a fusion 40? Thanks.
@inTankLLC
9 жыл бұрын
gcpbg Center pump chamber
@tsheringsherpa9795
9 жыл бұрын
Hey Steve will this work in the second chamber of a coralife biocube 29? and how securely is the magnet holder on the skimmer?
@inTankLLC
9 жыл бұрын
Tshering Sherpa Yes it will. It held on but also removable. I have heard of some securing it further with some silicone. We have a walk through of it's install on the Coralife 29 Media Basket's product page. www.shop.mediabaskets.com/searchquick-submit.sc?keywords=cl29mr
@tsheringsherpa9795
9 жыл бұрын
inTank, LLCj just purchased your media tower and the skimmer. will this be a good combo with the inTank media tower? and do I have to make any cuts to the biocube to make it fit? and how high will the water level have to be in order for the skimmer to function properly
@inTankLLC
9 жыл бұрын
Tshering Sherpa Yes. You can see a walkthrough here: www.shop.mediabaskets.com/searchquick-submit.sc?keywords=cl29mr There is a water level line on the body of the skimmer. You can adjust the water level in chamber two by adding new water while the filtration pump is on.
@tsheringsherpa9795
9 жыл бұрын
inTank, LLC I installed the skimmer, but there is a gurgling sound the skimmer is making any idea. I apologies for my noob questions I'm new to this.
@inTankLLC
9 жыл бұрын
Tshering Sherpa Make sure it is at the proper water level and the air valve is clear and open, read over the directions. All skimmers need to break in which can take up to 2 weeks.
@08jonche
9 жыл бұрын
Hi Steve, would this fit RSM 130D with the media basket?
@inTankLLC
9 жыл бұрын
Jon Sulit Yes, it sure does.
@inTankLLC
9 жыл бұрын
Necra Monium The magnet on the 9001 is removable, and flush with the body, unlike the 9002. I would still pop it off, no cutting needed, and glue it to the back side. This way it is mounted to the rear of the aquarium instead of the media basket. Just makes changing of the media basket easier.
@Squillaempusa
9 жыл бұрын
hey Steve, any ideas how to stop persistant micro bubbles? i've had this thing for a little more than a month and a half, and still have bubbles all over the tank. it should be past the break-in period by now, right? i've tried putting a piece of foam in the bottom portion of the skimmer, have shut off all other pumps (circulation & hang-on filter), positioned the skimmer's pump in every direction, i've tried patience, maintained water level on level indicator on skimmer,.. i've tried everything that i can think of, and read about, and still have 100's of micro bubbles in the tank. i have unfortunately resorted to plugging the skimmer into the "night light" outlet on my timer/strip-plug, so that it only comes on when the aquarium light go out. it now only runs about 13 hrs/day, but i don't have to look at the bubbles, and the fish don't have to deal with the stress of having the bubbles sticking to their scales. it's either that, or take the skimmer out of the tank all together. any advice would be much appreciated. thx. --bill c.
@inTankLLC
9 жыл бұрын
Sounds like you have tried a lot. Make sure the air hose is connected to the foam plate correctly. Shoot Tunze an email, they have great support. tunze at sbcglobal dot net
@Squillaempusa
9 жыл бұрын
inTank, LLC thanks man, i'll do that. ps-the hose is good.
@yeeee6184
4 жыл бұрын
Jo did u find out what the problem was. I have the exact same problem
@CCMoto
9 жыл бұрын
I really liked your review of the 9001. I have a jbl 29 nano, would you recommend this skimmer for my tank? or is there another you'd recommend even higher yet?
@inTankLLC
9 жыл бұрын
Hi Cord - Do you mean the JBJ Nano Cube 28?
@CCMoto
9 жыл бұрын
Ohh lol sorry, I was watching videos and had 29 on my head. It's a 24 gal nano
@inTankLLC
9 жыл бұрын
Cord Roberts I would go with the Tunze 9001. Make sure you have the surface skimmer attachment on the intake grates as you will have to adjust the water level in chamber two lower.
@teecee9660
9 жыл бұрын
Steve- I have a Pico Manta Ray 18- Do you think this skimmer will fit in the first chamber?
@nautaki
9 жыл бұрын
How are you holding the skimmer in place? I had to put the magnet in the pump area separator on one side and the skimmer in the area where the IM skimmer/media reactor should be located - I have a Nuvo 24 so the compartment to the right is bigger. My skimmer is facing the other way around
@inTankLLC
9 жыл бұрын
It is talked about in the beginning of the video. We glued a thin magnet to the back side of the body and it is held on the rear wall.
@nautaki
9 жыл бұрын
inTank, LLC Thanks! I purchased one of these bad boys and it is great. Cannot say anything about the skimming performance yet however it is indeed noiseless which is a big win for me so far.
@wenaliquer2685
9 жыл бұрын
Can you please advise how you got the Tunze to mount sideways in your video? Thanks!
@joseCalderon1976
9 жыл бұрын
Hi Steve, would this skimmer fit a nuvo fusion 10g? Thanks!
@inTankLLC
9 жыл бұрын
I don't think so by a little research but we do not have the Fusion 10 or 20 tanks in the shop yet. The dims of the 9001 are 4 x 2.5 x 8 inches. IM says their Ghost desktop skimmer will fit the Fusion 10, we sell that skimmer as well. Thanks.
@joseCalderon1976
9 жыл бұрын
inTank, LLC got it! Thanks. I'll look into getting the ghost one from you.
@glamislife70
10 жыл бұрын
I have an AC 70 on my reef hex tank and I've always loved your guys media basket you make for it but I've never gotten around to buying one. I currently have the Tunze 9001 inside the AC 70 with some filter floss, Chemi-Pure and Purigen. My question is will the Tunze 9001 fit in the large chamber with removing the shelf? I'd love to be able to use the media basket, it would make my cleaning soooo much easier.
@inTankLLC
10 жыл бұрын
Hi Alex- The 9001 will not fit inside our media basket, it's too wide. It will fit in our AC110 media basket which you then could still have media along side the skimmer. Thanks.
@Fernandocestari
10 жыл бұрын
Hi Steve. any clue on why my Tunze 9001 has too many bubbles retuning from the bottom? I have already tried with the air pump completely open also closed. I used also the surface skimmer and also remove to check if that was the problem. I don't know what else I can try. I would appreciate if you could help. Thanks
@inTankLLC
10 жыл бұрын
Make sure it is at the proper water level. All skimmers have a break in period after which micro bubbles will subside.
@Fernandocestari
10 жыл бұрын
Thanks
@yeeee6184
4 жыл бұрын
Did this work out for u? Because i tried everything and nothing worked
@MeghanJenks
10 жыл бұрын
Hi Stevie, I have the Media Basket and Fuge Basket due to arrive on Friday. Is there any way to get the 9001 to play nice with both of them in or is there just no way to fit all 3?
@inTankLLC
10 жыл бұрын
We will answer this on N-R where it was also asked. Thanks.
@MeghanJenks
10 жыл бұрын
inTank, LLC Okay cool, I'll look for it there! Thanks!
@guambombrc
10 жыл бұрын
Stevie-My silencer is not working. When I turn the knob all the was shut, it does not decrease flow level of the foam. If I manually pinch the air tube off with my finger, it stops the foam. any ideas?
@inTankLLC
10 жыл бұрын
Make sure the skimmer is a the proper water level. If pinching the air tube works then make sure the blue knob is actually hitting the air tube and closing it off when closing it.
@Mark-dk4ck
10 жыл бұрын
What stand is that IM 16 tank on in this video? It seems to have some sort of digital display on it...
@inTankLLC
10 жыл бұрын
The stand is for the Innovative Marine Nuvo 30 or 38. I mounted the reef keeper display into the door.
@timhaddon7583
10 жыл бұрын
Hello - thanks for the review. I have the Oceanic 29 biocube HQI version. I need a skimmer and have been looking at this one since it came out. I already the media basket, but do you think this skimmer will fit in my HQI 29? I'm a little worried it will not due to the light bracket. Thanks!
@inTankLLC
10 жыл бұрын
It will not fit in chamber two because of the light bracket. The Aquaticlife 115 will fit in your first chamber or some did mod the third and fit the Tunze 9002. So you should be able to do that in chamber three much easier with the 9001
@timhaddon7583
10 жыл бұрын
inTank, LLC Thanks. I have my return pump in the 3rd chamber and it will still fit?
@inTankLLC
10 жыл бұрын
Tim Haddon It should fit above the return pump. Dims are: 4 x 2.5 x 8 inches
@timhaddon7583
10 жыл бұрын
inTank, LLC Awesome - thanks Steve!
@guambombrc
10 жыл бұрын
Hey thanks for the vid. Will this fit on the IM fusion 30L?
@inTankLLC
10 жыл бұрын
You're welcome. Yes it will fit in the fusion 30L and 40. Thanks.
@rc5035
10 жыл бұрын
Hey Stevie I just wanted to point out and clarify as another member at nano reef forum who has the 30 L commented that he was unable to get the 9001 to fit in the second chamber but had to drop it in the middle over the pumps Any clarification on this?
@inTankLLC
10 жыл бұрын
Richard C Correct, the pump chamber is where it will fit.
Пікірлер