Very nice video. As a matter of fact, I'm going to build one. I have one questions. How do you connect your transducer? Do you let the cables just hang over the edge of the cooler?
@aarontonthat1690
Ай бұрын
Siiiiiiiiick. I got that same box…😈
@TravisInCanada1
3 ай бұрын
Shoutout G4 Outdoors for their guide on doing this build.
@Reelmainefishing
2 ай бұрын
@@TravisInCanada1 yes G4 is where I got the idea!
@lakenmarvin3051
3 ай бұрын
How does the drill battery perform? and how long would you say it last?
@Reelmainefishing
2 ай бұрын
It works awesome. My 12.0 lasts about 10 hours
@adventurekidz1781
5 ай бұрын
Any problem with the step down converter
@Reelmainefishing
2 ай бұрын
None… this box hasn’t given me any issues at all
@mitchellwerdehausen9871
5 ай бұрын
Do you need to add a fan? I heard some of these boxes getting hot if not fan is installed. Any advice?
@Reelmainefishing
2 ай бұрын
I haven’t had an issue with it at all… when I’m out on the ice the box doesn’t overheat and when I’m out on the boat on 100° day, it still doesn’t overheat
@C.Fowler
5 ай бұрын
Really really cool…..
@Reelmainefishing
2 ай бұрын
@@C.Fowler thanks man! I love this box - highly recommend
@DYFishing83
6 ай бұрын
How has your transformer held up?
@Reelmainefishing
2 ай бұрын
@@DYFishing83 still works great and I have hundreds of hours on it!!!
@christophercanady3059
6 ай бұрын
CAN YOU PLEASE DO THIS IN A STEP BY STEP VIDEO 😊
@Reelmainefishing
2 ай бұрын
Done!
@mr.shadestrains6033
6 ай бұрын
Awsum!!!!!!!!! “;-)”🎣
@colemantaylor6996
7 ай бұрын
What’s the point of the switch panel? Besides the light strip? Could you just wire the battery to a kill switch in the kill switch to the black box power everything
@Reelmainefishing
2 ай бұрын
@@colemantaylor6996 course you can. The point of the switch box was to have the USB ports etc - but not necessary
@Reelmainefishing
2 ай бұрын
@@colemantaylor6996 course you can. The point of the switch box is to have the USB ports etc, but not necessary.
@colemantaylor6996
7 ай бұрын
Why the switch panel besides powering the light strip. Couldn’t you just wire the battery to a kill switch in the kill switch to the black box to power everything?
@Reelmainefishing
7 ай бұрын
You totally can. I just bought the switch panel as a five gang and wired it up according to how I wanted it.
@zschwacks
7 ай бұрын
Do you have a link to the rubber grommet by chance?
@Reelmainefishing
2 ай бұрын
@@zschwacks no sorry I don’t, but I just picked them up at Lowe’s in the hardware section
@DanielChoate-ip9lf
8 ай бұрын
How did you wire the switches so the first one turns the power on. Do you switch the two + power wires on the first switch?
@Reelmainefishing
8 ай бұрын
The board comes all prewired so I ran my inverter power through the first switch with the red wire and the black wire all ties together to the other black wires.
@matthewmcnulty698
8 ай бұрын
Just. Curious. Will the. Speaker fit on the. Top lid of. The milaukee pack out
@bobkrol5939
8 ай бұрын
I built a similar box last year, but mine has a lid. It's heave, but my Quad pulls it fine when all loaded up. I used scrap 3/4" OSB flooring from a home improvement project. I like your auger mount - I wish I learned to weld! Maybe I could use Uni-strut to make something similar.
@Reelmainefishing
2 ай бұрын
Honestly, the auger mount didn’t work out. I didn’t build it soft enough to care for the auger on our snowmobile trips and it was damaging the auger… had to scrap it
@karolinaflyguy2555
9 ай бұрын
Awesome video. Tight lines from auburn maine.
@jonalexander944
9 ай бұрын
Can you share the inside dimension locations of your hinge ball center points? I have the same hinges but I'm having trouble getting the spacing right that allows lid to open to 90° and still be able to close the lid. Thanks Jon
@Reelmainefishing
9 ай бұрын
I will check on the dimensions tonight
@Wonderbeast
9 ай бұрын
Hey! great minds think alike! I put together something fairly similair to this! had a nice table top so I could lay my tent on top above everything else and use the table for filleting, cooking, etc. made a little hook on the back for 20lb tanks as well. Gjob man! can't wait to see when it's all done.
@GingaNinja1035
9 ай бұрын
Have you used this set-up the summer time? Or do you remove it for the summer months? I might build one for my nephew but he uses his a lot in the summer too and don’t want to create a bunch of work for him every season! It looks like a sweet system for sure!
@Reelmainefishing
9 ай бұрын
It is a lot of work. Takes me hours to transfer it from the boat to the Magellan box. But yes I move it from the boat to the box in the winter time and then back to the boat in the spring. Once I have another couple grand floating around I will buy another one so I don’t have to do it every season
@Reelmainefishing
9 ай бұрын
i haven't tried it in the summer. I take it out and put it on my boat
@jaredhebeisen4730
10 ай бұрын
Any issue with the Black box overheating?
@Reelmainefishing
2 ай бұрын
Nope!
@ahenz3
10 ай бұрын
do you have to run the screen independently on a switch? Once you have power to the black box, doesn't the power run from the box to the screen???
@Reelmainefishing
9 ай бұрын
I have to run a power separately to the screen
@Utah_Mike
10 ай бұрын
Dose the ion auger head pack with snow from your snowmobile track throwing snow/slush?
@Reelmainefishing
9 ай бұрын
I don’t ride to the lake with it on the side like that. I just put it on the side when I get to my fishing spot and I’m drilling holes and setting traps
@derekloe796
11 ай бұрын
Will the Garmin 126 ultra fit in this box ? If not can you recommend a box that will ? Thanks
@richardfenton1769
5 ай бұрын
Anyone get a Garmin 126 to fit in this box or similar?
@alexandrecharette5261
11 ай бұрын
I tought the system could go 12v to 32v ?
@stadinko20
9 ай бұрын
Yeah. I run mine with my 12ah m18. Haven't had any issues.
@wayne8276
11 ай бұрын
Nicely done, man .
@forddiesel4life
11 ай бұрын
Very clean build, best one I've seen so far. Do you think there is room for 93sv (9" screen) version?
@Reelmainefishing
2 ай бұрын
Thanks! I didn’t think that the 9 inch screen would fit but people in my other video are saying that they made even the 10in work
@huntgeese2
11 ай бұрын
I have questions on the internal measurement on the lid after the gas shocks were added. I have a 1042 head unit and it may not fit.
@matthewmcnulty698
Жыл бұрын
How. Much. Did the sled. Weigh before. The brandon box and how much did it weigh after the brandon box
@Reelmainefishing
2 ай бұрын
Honestly, I don’t know because I never cared how much it weighed… I am hauling it with a bearcat and I hardly feel it
@DanielChoate-ip9lf
Жыл бұрын
Are the struts 6” or 10 “?
@Reelmainefishing
9 ай бұрын
six inch
@brianshaffer5591
Жыл бұрын
Yes detail version please, can't see live wire to pole comes out of box.
@tomwiskup4642
Жыл бұрын
Wondering if anybody can help me with the Pistons he's using
@Reelmainefishing
2 ай бұрын
@@tomwiskup4642 I put everything that I use in the description of the video. These are the gas struts from Lowes. www.lowes.com/pd/Richelieu-Brushed-White-Lid-Support/1000597933
@tomwiskup4642
Жыл бұрын
Love the video wondering where you got your gas shocks from .
@Reelmainefishing
9 ай бұрын
I got them from lowes
@mkoenig57
Жыл бұрын
Just wanted to thank you for this video. I built one using the same box and lifters, but simplified it a bit. I also used a RAM ball mount on the inside of the lid, so I can tilt out the screen a bit. Instead of a switch panel, I just used a toggle switch to turn off the blackbox, and went with the larger 32 ah 14.5V battery. Your video was super helpful!
@Reelmainefishing
2 ай бұрын
Awesome! I’m glad it was helpful man!
@sfajita
Жыл бұрын
I know this was asked earlier but now that you have used it a few times. whats the life of it on that 18 am battery!!
@Reelmainefishing
2 ай бұрын
I get 10 hours on a 12.0 battery
@JoeHollandFishing
Жыл бұрын
Nice work on the Brandon Box! Great upgrades.
@bryanodom8697
Жыл бұрын
You should sale these
@sethwheeler7811
Жыл бұрын
I made this same box and I can confirm that the Echomap 106 SV (10" screen) will fit. It does take some patience and a few trials though. Used Amped Outdoors Li battery though. I too struggled with the shock placement and have a few extra holes too. Nice work on the video! Thanks for posting.
@DanielChoate-ip9lf
Жыл бұрын
Can you send me the measurements of where you placed the struts.
@MaximeCloutier-zg9fe
11 ай бұрын
Do you have a picture??
@sethwheeler7811
11 ай бұрын
Yeah, I can send a photo. To what email address?
@darrenadams1112
5 ай бұрын
@@sethwheeler7811 Where did you mount the 106SV at on the inside lid? I couldn't get mine to fit inside the box closed with it attached.
@sethwheeler7811
5 ай бұрын
@@darrenadams1112 I'll send you some pics. What email should I send them to?
@g4outdoors
Жыл бұрын
I'm watching you! LOL.
@bigcatchfishingmississippi
Жыл бұрын
Hey, that was a great video! Very informative and ingenious! I just started a new fishing channel a few weeks ago, myself. I gave you a thumbs up and I subscribed to your channel!
@qouavang3646
Жыл бұрын
What size are those elevator bolts? And what bolt size did you use to hold up the top bracket?
@axxie95
Жыл бұрын
Good video! Can't wait to see it in action man
@Reelmainefishing
Жыл бұрын
Appreciate it! It really works so well to transport. I’ll upload some videos from our derbys this weekend soon so you all can see it in action for sure
@Reelmainefishing
Жыл бұрын
Hi everyone, just wanted to let you know I uploaded a breakdown and walk-through of the dry box in case anyone wants to take a look! I appreciate the support
@timrickey9603
Жыл бұрын
Put up link please
@qouavang3646
Жыл бұрын
What size is that box?
@Reelmainefishing
Жыл бұрын
30 quart
@bradyachtenhagen9057
Жыл бұрын
What LED light strip is that?
@Reelmainefishing
Жыл бұрын
I’ll have to check to see what I bought. I’ll link it tomorrow if I can!
@reaperrodzandtackle902
Жыл бұрын
How long are the gas cylinders you ised
@Reelmainefishing
Жыл бұрын
I’m not exactly sure but I linked them in the description
@toddbrim1791
Жыл бұрын
Does the transducer fit inside the box?
@toddbrim1791
Жыл бұрын
Love this concept you did a outstanding job very neat and compact!
@Reelmainefishing
Жыл бұрын
it could but it would be hard to have the cord wrap back into the box without cutting a slot for it to go into.
@michaelpauljones1
Жыл бұрын
@@Reelmainefishing, what do you do with it then?
@Reelmainefishing
Жыл бұрын
@@michaelpauljones1 the cord when you buy it comes with a garmin bag. I just coil it up and put it in the bag with the transducer. They make covers for the ducer as well.
@Reelmainefishing
Жыл бұрын
@@michaelpauljones1 it hangs outside of the box I’m the Garmin bag the unit came with
@toddbrim1791
Жыл бұрын
Will a garmin 93 fit inside
@Reelmainefishing
Жыл бұрын
I don’t think it will
@Reelmainefishing
Жыл бұрын
It might but I think it will hit the gas shocks
@toddbrim1791
Жыл бұрын
How is the build working out for you out on the ice?
@toddbrim1791
Жыл бұрын
@@Reelmainefishing do you have any photos closer up of the inside and how things are mounted and tied together? I have all the components bought now just need to put it all together. Thank you !
@Reelmainefishing
Жыл бұрын
@@toddbrim1791 it is working really well. Even when the snowmobile trails are super rough it takes a beating in the tote sled and it holds up great.
@souamoua4341
Жыл бұрын
i'd love to see how you wire the switches to the black box. looking to build something similar. just got my 93sv and lvs34 in so trying to figure that out instead of a bog.
@B1GE2
Жыл бұрын
Dumb question probably but is it one power cord that goes to both the black box and the head unit or do you need a head unit power cord and a black box power cord?
@Reelmainefishing
Жыл бұрын
That is a great question! Both units (the black box and the screen) have a separate power cord.
Пікірлер