Great video, very happy you enjoy Valaverse collection as well. 🙂
@redtarget5275
6 күн бұрын
Unfortunate these aren't widely commercially available. Looking for a 1/12 or 1/10 scale JLTV to put gunpla girls in :(
@mlseries2553
6 күн бұрын
This isn’t a JLTV; I had to look one up. It would great if Oshkosh would license Ramen Toys to make one in ‘1:12.’ The JLTV is just different enough that I’d probably buy one too.
@DominusNox106
Ай бұрын
Where do we get this at?
@mlseries2553
Ай бұрын
This was 3D printed by me from a set of files entitled ‘Conquest/F5 Armored Vehicle’ from cults3D.com.
@RogueShooterAirsoft
Ай бұрын
It's nice, but far too fragile. That's why I dislike 3D printed stuff. If it were printed to use dowell rods to run through the body parts for stability it would be better. In the end, nothing is going to replace injection molded toys.
@mlseries2553
Ай бұрын
I sure hope so!👍🏼
@wowadrow
2 ай бұрын
Seek warhammer 40k landraider version of this...
@thejedikid16scalecollector34
3 ай бұрын
where can i buy this!!!
@thejedikid16scalecollector34
3 ай бұрын
wow man this is amazing!!!!
@BaronNate
4 ай бұрын
OMG, I LOVE this vehicle!!!!! WANT!!!!!!
@pachucopits
5 ай бұрын
How much world you sell it to me?
@mlseries2553
5 ай бұрын
I am no longer selling 3D printed items. Thank you for watching! Cheers.
@diggdirkler9445
5 ай бұрын
Could you do a video about the brothers of bone figures?
@mlseries2553
5 ай бұрын
Well just maybe I will. 👊🏼
@diggdirkler9445
5 ай бұрын
@@mlseries2553 subbed with notifs just in case
@RoninX33
5 ай бұрын
Pretty good print
@garnetnelson1419
6 ай бұрын
In other words $300 for fdm garbage
@mlseries2553
6 ай бұрын
Thank you for watching 👍🏼
@nickjohn9176
7 ай бұрын
How much to make another one i would pay some one for this
@mlseries2553
7 ай бұрын
I am no longer printing for a customer. You could buy the files from cults3D and hire a printing service. Thank you for your interest.
@KOnChucky
8 ай бұрын
How do I get to their page to order one?
@josephhutch8256
10 ай бұрын
Do you do commission work?
@mlseries2553
9 ай бұрын
Thank you for watching. I am not taking commissions at this time.
@Pensive_Melancholy_
Жыл бұрын
Is this the Valaverse truck out already?
@mlseries2553
Жыл бұрын
It is not. Hey, thanks for watching.
@jamesgraham8477
Жыл бұрын
Wowcher so cool 😎
@mlseries2553
Жыл бұрын
Ya buddy. Thanks!
@manuelapariciothecorsair3446
Жыл бұрын
Hi there, good sir. Can you please send me the link to go to the page to download the vehicle in question, and how much would it be?? Thanks so much for such a great video.! And Thanks in advance for any answer.
@mlseries2553
Жыл бұрын
cults3d.com/en/3d-model/art/1-18-scale-f5-conquest-armored-vehicle-for-3-75-to-4-action-figures Thank you for watching!
@Jay_Rodimus
Жыл бұрын
Well hey, when we get Clutch, if Hasbro doesn't give us a VAMP, its good to know we can just print one!
@mlseries2553
Жыл бұрын
Printing definitely makes me reconsider what I would actually buy vs what I’d rather print. :)
@teslasuperdestinations
Жыл бұрын
big beast!
@toyartunlimited3876
Жыл бұрын
Ok I had NO interest in this..... until now😮
@mlseries2553
Жыл бұрын
Glad you like it!
@deadshadow04
Жыл бұрын
Bruhhhh this is awesome!!!! And WOW 200 hrs?!!! 🥲 Either way, freaking amazing
@mlseries2553
Жыл бұрын
Good news-The 200 hours is somewhat hands off. Assembly and painting takes time though (Maybe 10 hours). Thank you for watching!
@davidr8389
Жыл бұрын
Great video.
@mlseries2553
Жыл бұрын
Thank you!
@happiaxxident
Жыл бұрын
Sweet!
@happiaxxident
Жыл бұрын
Sweet!
@GottaDangleThatCarrot
Жыл бұрын
This is more than bobby vala has talked about the book since it's come out. It's almost as if he doesn't want to promote it
@mlseries2553
Жыл бұрын
I have to admit that I wonder if there is a disconnect behind the scenes. I try not to dwell on it. Btw, thank you for watching!
@bjornjorgensen2220
Жыл бұрын
That was a pretty majestic review there.
@mlseries2553
Жыл бұрын
Thank you for those kind words!
@fitnessfrank83
Жыл бұрын
is Tim Kennedy in the book?
@mlseries2553
Жыл бұрын
Sadly, just a brief name drop. I would like to see his presence in the line increase in the future.
@JavierSolis-ml1ho
Жыл бұрын
Where did you get the brothers of bone figures?
@mlseries2553
Жыл бұрын
They are a custom from the AF Spec Ops Troopers. Thank you for watching!
@blkrazor8866
Жыл бұрын
What was the "recipe" (if anything special)? Mainly wondering where you got the goggles from. Excellent video btw!
@fieldofhorses
Жыл бұрын
perfect, just perfect. but just imperfect that i don’t own a 3d printer
@1godaboveALL
Жыл бұрын
Is there a link to get this???
@mlseries2553
Жыл бұрын
Thanks for watching. Are you looking for the computer files so you can 3D print this vehicle? If you are looking for a completed one, message me through Facebook. I have one completed and one partially assembled.
@1godaboveALL
Жыл бұрын
@@mlseries2553 YES‼ I'm wandering if your sharing the STL Files for print. I would like to attempt printing this! Can't right now, but I'll look for you on FB then. If possible please let me know here in the comments. Thank You!😁👍
@mlseries2553
Жыл бұрын
@@1godaboveALL cults3d.com/en/3d-model/art/1-18-scale-f5-conquest-armored-vehicle-for-3-75-to-4-action-figures. Not my file:) it’s from Repapstudios.
@1godaboveALL
Жыл бұрын
@@mlseries2553❤ Big THANKS Brotha‼ For your timely replies and the link‼ ❤Thank You for sharing‼😁👍
@largoslair42
Жыл бұрын
Very cool 😎 We'll explore the lore of Broken Alliances after we go through all of the Series 1 figures. Slick video 👍
@mlseries2553
Жыл бұрын
Oh I’m looking forward to it!
@AFAFsamedwards
Жыл бұрын
Hell yeah!!! This is dope. Great job my brother. 👊🏻🍻
@mlseries2553
Жыл бұрын
Thnx ma dude.
@AFAFsamedwards
Жыл бұрын
@@mlseries2553 yes sir. I shared this on legions of Valaverse page.
@AFAFsamedwards
Жыл бұрын
This is great.
@rongee7337
Жыл бұрын
THIS WAS GREAT!!!
@mlseries2553
Жыл бұрын
Thank you!
@jamatthews34
Жыл бұрын
Where can we get the STL file for this vehicle?
@mlseries2553
Жыл бұрын
Thnx for looking! cults3d.com/en/3d-model/art/1-18-scale-f5-conquest-armored-vehicle-for-3-75-to-4-action-figures
@Milka_1901
Жыл бұрын
amazing
@mlseries2553
Жыл бұрын
Thank you! I have another one on the printer right now:)
@hernanroriguez9835
Жыл бұрын
Do you know where you got those trucks or car in one of your videos were you put like 5 soldiers cuz I want them they look good if you could could you tell me the site where you got it
@mlseries2553
Жыл бұрын
That 1:12 scale vehicle was 3D printed on an FDM printer from files, designed by Repapstudios, that are up for purchase on cults3D.com
@brandonr8269
Жыл бұрын
Nice rig. Would just like to say that I think 1/12 is the wrong scale for 1/12 scale/6" figures. Why? Because at 1/12 scale, a 6" figure on average scales to a 6 foot tall human, of course. Some are larger than that: Mad Marauders Barbecue is one that is larger, at 6.47". That means that Barbecue in this case is almost 6'6" tall. Falcon scales to about 6'4", over 6 feet for male Classified figures seems to be the norm. Cover Girl is a 6" figure, or 6 feet tall at 1/12 scale. That makes sense for a former fashion model, but Scarlett and Lady Jaye are the same height at 6" figure, so either GI Joe only hires very tall women or 1/12 scale isn't correct. At 1/11 scale however, things start to make more sense. BBQ: 6.47" figure * 11 = 71.17". 71.17" / 12 (convert to feet) = 5.93 feet (or just under 6 feet tall, 5' 11ish) which makes much more sense for an Irish-Bostonian firefighter than 6 foot 6. For Falcon (let's go metric) it's 162mm figure, so 162/1000 = 0.162m * 12 = 1.944m = 6.38' (just shy of 6' 4". At 1/11 scale, the same figure 162mm/1000 (convert to meters) = 0.162m * 11 (scale) = 1.782m tall = 5.85 feet = 5' 10" tall. For the female figures, corrected to 1/11 scale it's 152.4mm/1000 = 0.1524m. Convert to human scale is 0.1524 * 11 = 1.6764m tall human female which equals 5.5', or 5' 6" (probably more the case than all 6 foot tall women). Thus, since the scale is more precisely 1/11 scale, and there are some fairly big dudes within the ranks, it makes sense to build GI Joe Classified vehicles with a little extra legroom, at 1/10 scale. Anecdotally, I can say that male Classified figures fit perfectly in terms of legroom, headroom, reachability to things like steering wheels and gear shifters and line of sight with my Axial Wraith 1/10 scale RC trail trucks.
@mlseries2553
Жыл бұрын
Love it! Thank you for the comment. I agree with so much of what you said. I wonder if the 1:12 scale figures we buy will continue to get bigger over the years!?
@BaronNate
4 ай бұрын
@@mlseries2553 The problem I worry about is things like a Mauler tank, the bridge layer, etc. Those vehicles were pretty beefy at the 3.75 scale, if armored assault vehicles like this are this size, tanks would normally be massive if going on real world stats. That worries me because that limits what can be made both in costs and lets be honest, ROOM SIZE for our collections. Its a legitimate concern I believe. Most of us, with all the money we spent on figures, are lucky if we can afford even a 100 dollar vehicle with a 75 dollar tow behind. That's REALLY stretching our wallets for even us "well to do" collectors. I love this vehicle, no doubt about it. Can you imagine if they did make something like the Mauler or Mobat and gave us a removable top where we could move our figures around in the hull of the vehicle and basically turn it into a playset as well as a vehicle? That would rock. If you put computers in the back of this and had only one or two guys in the back working surveillance, this becomes a "base playset". Just my thoughts.
@invincibletoys382
Жыл бұрын
Looking at printing this baby out what did you have to scale the original model up to? If I'm correct it was made for 3 3/4 4 inch figures.
@mlseries2553
Жыл бұрын
1650% for 1:12. Also FB messaged you.
@invincibletoys382
Жыл бұрын
@@mlseries2553 awesome brother appreciate it!
@raypaz2947
Жыл бұрын
Very cool
@mlseries2553
Жыл бұрын
Thanks Ray.
@KensToyz
Жыл бұрын
Damn, that looks damn good! Was there a reason you didn't spray paint it?
@mlseries2553
Жыл бұрын
Too cold outside 😅
@KensToyz
Жыл бұрын
@@mlseries2553 good enough!
@MayumiC-chan9377
Жыл бұрын
we IFV and AFV
@MayumiC-chan9377
Жыл бұрын
beautiful
@ramonwhite1379
Жыл бұрын
Mannn Is This the Prototype for the Valaverse Vanguard????
@mlseries2553
Жыл бұрын
Haha. Nope. I’m very excited for the Vanguard. I’m thinking it’s going to be lots of fun!
@ToyFiend
Жыл бұрын
Cost in resin / print materials?
@mlseries2553
Жыл бұрын
I don’t do resin, but the cost of filament is just short of US $75. Sadly, these things don’t print or assemble themselves, lol.
@happiaxxident
Жыл бұрын
Nice one! Now all I need is a PC, appropriate software, 3D Printer, materials, and… I’m sure I’m missing something. On second thought… Maybe I’ll just buy one or two from your Etsy store?
@mlseries2553
Жыл бұрын
Slip into my DMs ;)
@ungurdani8346
Жыл бұрын
Salut my friend super car super video subscribe subscribe ..
@Vitriolblog
Жыл бұрын
Interesting how you mentioned the Tim Kennedy figure. I have a buddy who actually trained with him and he had mentioned that they did all this modeling to create his figure. Nice to see the finished product!
Пікірлер