Schöne Bilder. Da kommt wieder "Sandweh" auf. Mit welchem Reifendruck seid Ihr im Sand gefahren?
@Wuff_Mo
Күн бұрын
Dankeschön! Im Sand waren wir mit 1,8bar unterwegs. Wenn’s sehr weich war mit 1,5bar.
@CanadierCom
Күн бұрын
@@Wuff_Mo Vielen Dank. Unsere Schmerzgrenze liegt um die 1,2 bar.
@Wuff_Mo
Күн бұрын
@@CanadierCom Ebenfalls mit 195/70r15 Reifen?
@CanadierCom
Күн бұрын
@@Wuff_Mo Wir fahren auf unserem Syncro General Grabber AT3 in 205/70/15. Sind also nur unwesentliche größer. Ich wollte bewußt keine Reifen, die die Kraftübertragung durch größeren Umfang verschlechtern.
@Wuff_Mo
Күн бұрын
@@CanadierCom ah, ja. Die stehen bei uns auch hoch im Kurs, bzgl. dem nächsten Satz Reifen. Einstweilen sind wir aber mit den Insa Turbo Cazador aber auch sehr zufrieden.
@user-bd6xo9ld2d
3 ай бұрын
Nice do you have a lift kit on the van?
@Wuff_Mo
3 ай бұрын
Thanks! Yes we have 5cm of body lift installed.
@user-bd6xo9ld2d
3 ай бұрын
@@Wuff_Mo nice can you maybe send me a link of your kit and must I do other mods on my Syncro to accommodate the kit or is it just a straight fit ?
@Wuff_Mo
3 ай бұрын
@@user-bd6xo9ld2d Our lift kit is custom made since most parts are relatively easy to manufacture. But you can get a complete kit from Seikel. www.seikel.de/shop/t4-syncro-lift-kit/?lang=eh Or you can get all parts individually from G-Parts except the reinforced rear springs (which you can get from your local aftermarket shop). www.g-part.de/VW-T4-offroad-equipment There are a few things to consider. Check out the Seikel installation Guide: www.seikel.de/wp-content/uploads/formidable/29/EN_1011-0002-T4-Suspension-lift-kit-Rev10_231024.pdf Or the more detailed (but in German language) community page: www.vwbuswiki.de/index.php/Syncro_T4_höher_legen Be aware that depending where you are located there might be national regulations on car modifications. Getting the complete kit and support by Seikel might help a lot to meet these regulations.
@user-bd6xo9ld2d
3 ай бұрын
@@Wuff_Mo wow ok what material did you use if I may ask and what did you do to front driveshafts so it doesn't touch the subframe when bottoming out?
@Wuff_Mo
3 ай бұрын
Sure. Spacers for rear diff and rear springs are out of aluminum. High carbon steel for rear shock absorber extension. No extensions on front shock absorbers. And with installing new OEM engine mounts the driveshafts didn’t touch the subframe. Otherwise you could dent the subframe in a bit or trim a section out to make space for the driveshaft. See pictures in vwbuswiki.
@hanneskuffel1630
3 ай бұрын
Wow, da kommt Fernweh auf!
@mountains.whatelse
6 ай бұрын
cooles video, könnt ihr euren ausbau/setup vlt kurz vorstellen? denke sehr minimalistisch bzgl. gewichtsreduzierung? lg
@Wuff_Mo
6 ай бұрын
Ja, genau. Wir haben einen relativ simplen Ausbau. Mit einem Mix aus stabilen Materialien und leichter Bauweise sind’s knapp unter 2,3t Eigengewicht geworden. Die letzte Zeit waren wir ziemlich beschäftigt, aber jetzt kommen dann bald weitere Videos. Da stellen wir den Bus dann auch mal vor.
@hanneskuffel1630
8 ай бұрын
Voll cool ! Zu welcher Jahreszeit ist das? Für wie lange habt ihr Proviant dabei? - danke für den schönen Reise Bericht !
@Wuff_Mo
8 ай бұрын
Dankeschön =) Frühling war’s und wir hatten Essen für ca. 14 Tage, Wasser für 5-6 Tage dabei.
@tilljasper4987
10 ай бұрын
Mehr Abenteuer! 🎉
@Timgrecofarrierservice
10 ай бұрын
Jawoiiiiii👍🫶
@Wuff_Mo
10 ай бұрын
Hehe nice dass das video zu dir gefunden hat!
@Wuff_Mo
Жыл бұрын
Das hier ist mein erstes Video 🥳 Also gerne her mit Verbesserungsvorschlägen!
Пікірлер