China made.!! Be careful..safty is #1.. go with an old school inground..i have a 1967 Rotary inground in my home shop..i restored .to like new.. got it for free. From a old station..it was in good shape...oil tank above ground ..now..no E.P.A. issues. There except ! Under 50 gallons..of oil..in the unit.
@farbrorjosn
Жыл бұрын
Maybe thats why its called "Bend"pak. DUH
@stanielsoncoochiesmellehsm6114
Жыл бұрын
No click click click?
@MDLandandProperty
2 жыл бұрын
Great explanation of the problem 👍
@alecb8509
2 жыл бұрын
The lift may be certified but the opererator sure wasn't.
@ralphss434
2 жыл бұрын
cable over pulley design cost less but cheap,,that's why I spent Xtra for a Worth brand chain drive type
@chicagowsox212
2 жыл бұрын
All I know is that if someone has a smoke detector beeping from not changing the battery I tend to believe they don’t take care of their things.
@Irishjay1025
2 жыл бұрын
Seems more like poor inspection practices and set up issues to me.
@theonetheonlyw5483
2 жыл бұрын
Clearly this is operator error or lack of routine inspection or both. Regardless this is a "you" problem there bud.
@KFLson
2 жыл бұрын
It ain’t called bendpak for nothing 💁♂️ our shop just bought this 4 post I hope it doesn’t happen to us 👀but we always make sure all 4 corners are unlocked and lock 🔒
@DARANGULAFILM
2 жыл бұрын
Getting in and around that lift column with a camera and disturbing that loose cable when the lift was in that state was too risky for my comfort. Potential human flat-dog time.
@iam1smiley1
2 жыл бұрын
I've worked on a lot of different lifts and even seen a few come off lifts in the 30 years I've been in the automotive industry. Always watch that the vehicle is going up and downs straight even when you have it set up properly, it's not nap time or time to yap to your buddy in the next bay.....they may not work right at times so pay attention and get it fixed.
@coreypatterson1386
Жыл бұрын
Thank you for your comments. What is your opinion on Atlas 4 post lifts? I am considering one....
@mdmizanur7127
2 жыл бұрын
Wit
@AnthonyJ350
3 жыл бұрын
Sorry this looks like user error. The locks weren't disengaged properly and the user kept lowering the lift not paying attention.
@gplusgplus2286
3 жыл бұрын
If I were one of these companies I'd tell you Congratulations, you played yourself.
@wak359
3 жыл бұрын
Laughing my arse off! This video needs to be shown in high-school auto shop classes to demonstrate what not to do. This is a great example of a bunch of schmendricks and schmucks trying to be mensch. (Avi, do you read Yiddish, you schmendrick).
@stuartshaw3275
3 жыл бұрын
That's all operator incompetence, the lift wasn't set on the locks like it was supposed to
@6806goats1
3 жыл бұрын
Drugs
@2blackbikes
3 жыл бұрын
Well I had a BendPak HD9 in my garage and had nothing but failures of the 110 pump went through two (2) pumps before I finally said no more 110's. Swapped over to the 220 motor and the lift worked fine. Couple of things "critical" you MUST LEVEL all four posts. Residential garages typically have slopes in the concrete floors for drainage flowing to the front. This can and will cause BIG problems if you don't properly shim the posts and level everything. Also, as stated these 4 post lifts can be used without bolting to the floor - but I would NOT recommend that, bolting to the floor is a much better and safer scenario. Most all of the lift companies in the US sell lifts made in China, BendPak is no exception it's a Chinese lift, so be aware. If safety is of no concern to you then install your lift yourself - however, if you care about safety and that of your family members then have a professional install your lift for about $700 it's peace of mind. Make sure you do your research and vett the company you buy from there are a lot of fly by night shit bum Pirates out there - and it sounds like you found one.
@McNasty7100
3 жыл бұрын
The cables probably weren't adjusted and the user wasn't paying attention going down. The slack locks engaged probably causing the cables to jump on the 4 stack of sheaves which are also probably bored out due to use overtime. Check out your equipment regularly. Bend paks are called bend crap in my line of work either way
@McNasty7100
3 жыл бұрын
Assuming none of the cables snapped entirely of course
@kevinbacon8716
3 жыл бұрын
I see people have already explained how stupid you are so I’ll just say you’re a dumb ass
@BenVanAmburg
3 жыл бұрын
This almost exclusively would happen only if you lowered it incorrectly. Safely latch got caught on one corner and you kept lowering it. I've almost done it. But never enough to break the fucking lift.
@KFLson
2 жыл бұрын
Plz no swearing 😶
@BenVanAmburg
2 жыл бұрын
@@KFLson no
@alecb8509
2 жыл бұрын
@@KFLson Fuck no
@ironjohn5914
3 жыл бұрын
Don't drink and work on cars LoL
@traymindlesstraymindless1892
3 жыл бұрын
user error all day
@mbrang00
3 жыл бұрын
I guess it really does bend when packed....
@walterk1221
3 жыл бұрын
It bends when a meathead mis-packs it. In a rush to shut down at close of business for the day a human error occurred and now the responsibility for this error is being denied.
@genecoppedge5972
3 жыл бұрын
This is why you go with Mohawk Lifts, not something made in China
@walterk1221
3 жыл бұрын
Mohawk lifts are assembled in Amsterdam, NY of Chinesium components.
@damonjones9270
3 жыл бұрын
Wow yeah that's only a 9,000lb lift with a diesel truck on it!!! That is a cheap homeowner grade car lift not a truck, let alone a diesel. Even if the truck weighs less than 9,000lbs most of the weight is in the front, hence why the front is what gave out. 9,000lbs= only 2,250lbs per post meaning maybe the total truck weight was ok, but the rear was underloaded, the front was overloaded. Sadly user error.
@georgeshotrodbarn2113
3 жыл бұрын
China junk
@sorryimajerk735
3 жыл бұрын
wtf do you know
@geyser3445
3 жыл бұрын
You are allowed to talk during the video.
@michaelmccarthy4615
4 жыл бұрын
Read the owners manual.. .
@christopherjustus6667
4 жыл бұрын
MOHAWK BABY. ALL THE WAY!!!!! Nothing but Mohawk lifts. I have a Mohawk that is 27 years old and still has the original chains, hydraulic cylinders, and carriage rollers. Everything is original and it works perfectly. Why anyone would purchase anything less is beyond me.
@walterk1221
3 жыл бұрын
27 years ago Mohawk lifts were not assembled in Amsterdam, NY of chinesium components.
@OnePercentSociety.
4 жыл бұрын
Please stop dragging your feet.....jeeeezzzz
@jwjco
4 жыл бұрын
absolutely ' user failure '
@kobefox9163
4 жыл бұрын
Looks like some moron doesn’t know how to use a lift, they didn’t raise it up before releasing the locks. The locks didn’t release all the way.
@TheChiefJudgeDredd
4 жыл бұрын
That’s your own doing. Take responsibility and not blame other people. If you’re gonna spend daddies money, at least buy something you can handle
@YellowRondo52
4 жыл бұрын
Looks like an operator error
@RubyIsBored
4 жыл бұрын
It wasn't lowered onto the locks, that's why it failed, if a cable loosening led to the vehicle falling, then it couldn't have been on the locks, apparently I've learned more about how to operate a car lift in the month since I started the automotive tech program at my local vocational school than you have in 10 years. congratulations, all five of you probably have learning disabilities, and a 17-year-old can use a lift better than you can
@jaybrooks1098
4 жыл бұрын
Who buys a lift with the word bend in it’s name?
@filibertobarrera3839
4 жыл бұрын
The lift didn't fail,the inexperience of making sure all four locks were locked failed.They sell thousands of this things.But only a few unexperienced guys seem to fuck up something do simple.
@mollycrime
5 жыл бұрын
of COURSE there's a fire alarm beeping too
@michaelheimbrand5424
5 жыл бұрын
That lift looks like a cheap rip-off of the 30 yo Stenhöj i just installed. I guess, as usual, quality is what remains after the price is forgotten.
@imadog131
5 жыл бұрын
Good example of a lift being overloaded. If you are going to lift 4 x 4 trucks, especially diesel trucks you are probably going to exceed the capacity of a 9000 lb lift. Why? Because a 9000 lb lift means 2250 per corner. if you lift a 4 x 4 diesel such as my F250, you have 4800 lbs on the front end. i dont own a shop but i do have a 10,000 lb 2 post in my garage and i have had a few large trucks on mine but they were weighed at the truck stop first. granted a few hundred pounds probably shouldnt make a difference but thats the limitation and for my life Id rater be 300 lbs under that limit that 300 over.
@wak359
3 жыл бұрын
No, you do not "... have 4800 lbs on the front end..." I am doubtful that an F250 even has a 4800 lb Front GAWR. A 1990s Cummins powered Dodge W350 only has a GAWR (front) of 4500lbs. If anyone does not know what GAWR means then they should not be babbling nonsense.
@imadog131
3 жыл бұрын
@@wak359 call it nonsense if you want but my lift didn’t collapse and the scales at the truck stop don’t lie.
@wak359
3 жыл бұрын
@@imadog131 okay, I stand corrected. You got me curious and I did randomly choose 2017 F250 and it front GAWR is (can be?) 5200. So, I admit my conclusion based on vehicles with which I am familiar is less universal than I thought.
@imadog131
3 жыл бұрын
@@wak359 I appreciate your response man.
@wak359
3 жыл бұрын
@@imadog131 not a problem, I will admit when I make an error.
@neilfeger8926
5 жыл бұрын
I have a similar Bendpak lift that is a 14000 lb piece of crap I have owned it for two year now and I have followed the recommendations of Bendpak according to there operations manual and have two corner posts bend due to locks that did not release properly upon lowering the vehicle the structure of the corner posts are just too weak and even though the rack is under warranty Bendpack will not replace the posts because they say it is operator error. BS read your operation manual BENDPAK . I replaced my Ammco 12000 lb lift which had a lock or two hang up when I was lowering a vehicle and never bent a post. Bendpak lifts in my opinion are not worth the money and they don't stand behind the product. I paid over $7000 for my lift and even the approach ramps are bent due to driving a heavy vehicle up onto the lift. Shame on Bendpak. Again I never bent an approach ramp on the old Ammco lift.
@jggmoreno7996
5 жыл бұрын
Always check on your employees/mechanics to see if lift Is resting on lock position. Some bosses just want to collect take responsibility they are your employees/workers/mechanics
@jggmoreno7996
5 жыл бұрын
Every time we install a lift we showed user/buyer how to properly operate. We test go up and down make sure everything is good to go. Have the lift ready for electrician to wire up to 220volts.
@jggmoreno7996
5 жыл бұрын
Lift probably wasn't even resting on the locks. Sorry to say this but 70% of mechanics dont sit their lifts on the locks every single time they go up. Sometimes they forget to come down and rest on the lock.
@jggmoreno7996
5 жыл бұрын
Lifting Auto Equipment services Houston Texas 832-816-1645
@jggmoreno7996
5 жыл бұрын
This lift is not designed to go up and down every day like a regular commercial grade lift brothers.
@jggmoreno7996
5 жыл бұрын
Thts not a commercial grade lift brother that's what they called a parking lift for houses or what not. That's a bendpak 9000lbs cap. And yall said it yall self yall were bringing it down before leaving the shop so truck wouldn't be up over night. This is a user error mistake. On bendpak lifts user is required to pay attention when coming down on all 4 corners. If one corner stops from coming down it means lock is still engage user has to go up and press the air valve again to fully open the locks and travel down with out issues.
Пікірлер