Can I get access to the files for each individual piece instead of them all as one file?
@fg1110
Ай бұрын
What is this for?????
@santipelaezgonzalez9342
Ай бұрын
I wasn't exactly looking for this but your video has helped me solve a drift problem in the slider, so new subscriber
@zackeryolds4058
2 ай бұрын
Do I need to put the detent magnets or is that optional
@Jellybeantiger
4 ай бұрын
I would break it if I tried doing this.
@muranziel
5 ай бұрын
Could I install two sets of indent magnets? one for 50% and one for 75%?
@doomhammer6724
5 ай бұрын
I printed the frame and the spacers out, brought some cheap bearings, and assembled it. Well now it is not just sticky but also very loud and also has some vibration caused by the spring break. I understand now why this is sold as a kit. :D If you try to get the bearings and print out the parts by yourself, be sure the print quality is good and you buy quality bearings or it will be worse. I also greased the rods with silicone spray before hoping for less stickiness, but that also seemed to made it worse and also I didn't clean the rods before installing this upgrade thinking it will be fine. It wasn't.
@brucemamont2289
8 ай бұрын
I received my parts kit yesterday, 6 Jan 24, and this video does not explain with sufficient detail how to assemble the (new?) parts kit. I had to use screws from the TWCS to assemble the parts. I have parts that I could not install because there was no explanation. I was able to complete assembly and the TWCS works better, but I'm unhappy with this video. Are text with photos or drawings available that correspond to the new parts kit?
@ukaszAniszewski
8 ай бұрын
Can I buy only STL?
@kitmarshall4084
9 ай бұрын
waiting on my throttle, does it already come with linear rods/shaft?
@GreenHero-sm6kf
9 ай бұрын
How many cm should it be?
@Czecher86
9 ай бұрын
just use transparent tape on all surfaces- fixed for almost free...
@porksandbean
9 ай бұрын
just did this mod with my 3d printer. thanks!
@nishacnair1240
8 ай бұрын
Hi, which detent size did you use? What is the spacer_5mm? How much infill did you use? Thanks!
@porksandbean
8 ай бұрын
i think 20% infill. I printed all the spacers and I believe I used the 1.5 one as I have a thick double sided tape.
@nishacnair1240
8 ай бұрын
@@porksandbean I see. Where is the 5mm spacer supposed to go? Also, which detents did you use? Are the detent spacers only dependent on tape size and not the position of the detent itself? Thanks for the reply!
@LeMontAgr
10 ай бұрын
Why we are using that 70% Whats problem? Sry, im dont have that device and cant understand how its important or not
@tsikada
10 ай бұрын
fantastic work! what is the "spacer_5mm"?
@Emanolinis
Жыл бұрын
Hey whats those magnets doing there?
@Marauder623
Жыл бұрын
Are the detent magnets optional? Because I fly multiple aircraft in DCS including helicopters and and it to be as flexible as possible.
@RabbitConfirmed
Жыл бұрын
for what is the "stop" at 30%?
@porksandbean
9 ай бұрын
probably his preference; i set mine at 50%
@genericfutureman9454
Жыл бұрын
This is sick! I am going to pick this HOTAS up and I am not going to wait for the internals to wear out to pick up this upgrade.
@Ropetor
Жыл бұрын
What's the difference between the Hybrid 2pl + 2 LM8LUU and the normal 2 LM8LUU if I use the stock friction bar?
@octaviodoran
Жыл бұрын
Hi I was wondering what are the yellow things that are straight and are used right next to the blade and I know the one on the top is but what's the other one that's connected like or that stopping one thing on the circle thank you
@justinpeer5660
Жыл бұрын
Just printed this, installed it with 4 polymer bearings and the difference is night and day. Really fine throttle control is finally available. Thank you so much for making this available to us.
@VongolaEX10
9 ай бұрын
Which polymer bearings did you use? Can’t seem to find the correct size ones
@dandiesis9525
Жыл бұрын
Why detect magnet are not in the exact middle?
@cesarrios6222
Жыл бұрын
Hola, I installed it according to the tutorial but unfortunately the screw that holds the bridge of the potentiometer rubs against the plastic of the base and the stripe, I have to tighten it very hard but even so if I press the base in the center it rubs against the slider with said screw. Was there an error in printing?
@laserak9887
Жыл бұрын
Can't buy this anymore?
@dickdick999
Жыл бұрын
I appreciate its a while ago but the link isnt finding this iterm which \i really would like. Have you any ideas as to who to contact about this item? Cheers
@glennmurray.
Жыл бұрын
Where can I buy this as iv just bought one and noticed the problem straight away Website please.
@ryantucker6972
Жыл бұрын
Any chance you'll be making more soon?
@TheRobweb
Жыл бұрын
The final test does not look so stable.
@bootyclapofficial6986
Жыл бұрын
anyone got any idea where to source this upgrade for australia? the etsy link is no longer active and ive searched amazon and ebay and cant find this (so far) available anywhere atm :(
@Youngie761
Жыл бұрын
I got it on Etsy probably a year ago in the U.S. and it's no longer found like you said. Downloading the available design and finding someone to 3d print it might be your best bet. The barrings are sold on Amazon I think, you just need the mounting plate printed.
@OskarLewczuk
Жыл бұрын
I used that design and it does'nt work very well. The gear is made in 2 parts for no reason which makes it easy to break apart.
@Jbpennes
Жыл бұрын
No longer making it? :/
@Kiuvi583
Жыл бұрын
this still avaliable???
@luika112
Жыл бұрын
Hi! Would you guys re available for this mod on the website? thanks!
@jjsoko6393
Жыл бұрын
Posted 3rd Nov and arrived 26th Nov, (Canada->UK). Works so much better than stock item. Great video to thanks.
@GaryMillerUK
Жыл бұрын
from where did you source this? The etsy link says 'unavailable'
@nattybrowning9864
Жыл бұрын
What sping do you use?
@dariuszbienkowski
Жыл бұрын
I just installed bearings in my controller. In fact, the movement seems a bit smoother, but unlike the stock item, it is much louder, and when moving the throttle forward and backward, the bearings seem to run "dry". Have you also experienced such problems? I'm wondering if my bearings are just poor quality, or maybe some thick grease should be applied there.
@mrforester
Жыл бұрын
did you solve the issue?
@djwave28
Жыл бұрын
I bought this part with polymer sliders for Elite Dangerous. This is an awesome vid and good to follow up to the point where the calibration screen is shown. I have windows 11 and did not see this option. Solution: I reconnected the plug show @0:48 and started the game. I launched a ship into the black and set the throttle to the zero point. Do make sure you have not set a "dead-zone" in the options/control settings. In doing so I was able to put the detent magnets in the correct spot. I haven't even set a dead-zone after assembling. It goes perfectly to zero on the magnet. When putting the slider on, I could already feel the smooth sliding action. I chose the polymer, because ball-bearing might put wear on the slider rod. So far it feels great. It does not stick as the original slider. Quite happy with it so far.
@halcyonzenith4411
2 жыл бұрын
This upgrade turned my TWCS from a disappointing waste of potential, to the best throttle for precision control there is. I used the metal bearings in combination with a very generous amount of Nyogel 767A, and this gives me the stable fine control I need for hovering and landing helicopters. Some people say they get problems with the Nyogel grease- if that's the case, it's probably due to not using enough. I added the Nyogel until it would not take any more, now it moves smoothly and precisely through the whole range of motion, like the dampened motion of a microscope dial, only linear rather than rotational.
@TheEndlessFields
2 жыл бұрын
Absolutely amazing mod. Throttle no longer sticks and moves very smoothly. Polymer bearings were a perfect choice and are extremely quiet. Thank you!
@Jonathan-Hack
2 жыл бұрын
What is the diffrence between the colors and LM8LUU vs LMLUU?
@TheEndlessFields
2 жыл бұрын
@@Jonathan-Hack the semi-transparent colors are printed in resin versus I assume a PLA so will be a bit stronger. I don’t know that strength matters in this application, so mostly just looks. The LM8LUU is a long bearing and so you’d have only one per side. The LM8UU would have two per side. For the metal ones I’m not sure there is much functional difference. There is a polymer LM8UU version though, which offers a touch more friction and is also much quieter than a metal bearing while sliding.
@trickybusiness1948
2 жыл бұрын
Kind Sir :) I've received my order, which was very well packaged btw, watched your instruction vid and replaced the component in my Throttle ... Buttery smooth throttle and all i can do is convey my gratitude for your solution as the default component was a drag to play with. Again, Thank You! o7
@howlingbeats2544
2 жыл бұрын
Never used a throttle before, which detent option should I go for?
@RYVENANT
2 жыл бұрын
Which clearance size is recommended for 70% detents? Or is that size only dependent on the thickness of double sided tape?
@zakzwijn8410
2 жыл бұрын
I got it today and installed it with help of this guide. Works great, thanks! One small remark: at 2:41 you are showing the TWCS Throttle Properties, but these properties are from the standard windows drivers. If you have the drivers installed from the thrustmaster support site, you get a different interface without the calibration options. I had these drivers installed and I removed them by downloading the executable from the page in this post and running the installer. Then I got the options like shown in 2:41.
@LordFarQUAD4
2 жыл бұрын
Good lookin' out
@bme7491
2 жыл бұрын
Just installed this mod. Turns what would normally be a POS into a usable product. Stiction is completely gone, Went to split throttle with a 50% detent. I can increase/decrease the throttle in very small increments. Great upgrade.
@FN1980a
2 жыл бұрын
I'm in desperate need of this mod! Any idea of when these will be available again?
@lilbippy7691
2 жыл бұрын
Can I get a quick rundown on the diff types available?
@Smashachu
2 жыл бұрын
omg i just got my throttle today and it's just as bad as everyone is describing. I thought people were exaggerating how sticky the slide is, but it really significant force to move it a small amount of force. Ordered my slide the other day, really looking forward to replacing it with your product :D
@dumutef2000
2 жыл бұрын
You're an absolute legend of a fabricator, got my cheap little setup feeling so much better for my travels through space.
@Сталкер-ь2х
Жыл бұрын
O7 cmdr, what type of activity do you prefer?
@txgatito
2 жыл бұрын
Just waiting for mine to arrive. Chose the longer cylinder style. Holding off on using my TWCS until I make the upgrade.
Пікірлер