studying for airframe right now this is the PERFECT refresher! so informative and helped me jog my memory! great video
@nathanstevenson5209
16 күн бұрын
Same
@mikejustice1196
3 ай бұрын
To much gibberish with crayons
@ThePoisonRay
4 ай бұрын
This is a great video! thanks so much for the in depth info.
@aminnikmehr4738
5 ай бұрын
I love this video God bless you ❤
@michaeljohn8905
7 ай бұрын
Thank you for this video ! Gonna watch it again and again thank you very much for posting !
@marcredgate7288
Жыл бұрын
You’ve mentioned grain a few times but not how to bend in relationship to the grain, ie across or with.
@Volfas
2 жыл бұрын
Thanks! I haven't done this in 4 years, and just got hired lol.
@FISHH00KS
2 жыл бұрын
Your information on the sight line is simply wrong.
@howardmatthews2455
2 жыл бұрын
Well taught
@tonyw.9132
3 жыл бұрын
This is a great well presented presentation on the subject of sheet metal bending.
@lonebulbasaur1502
3 жыл бұрын
God bless you for this information, my instructor isn’t good at teaching. He gets mad too whenever asked a question...
@sudeep_sapkota
3 жыл бұрын
finally found clean concept
@bdog3869
4 жыл бұрын
Thanks for the simple explanation. Very easy to follow.
@airaero5473
4 жыл бұрын
4:59 don't you mean 5.835? That's what it says on the diagram
@whyliehrynyk1441
3 жыл бұрын
Good catch lol
@us_kim
5 жыл бұрын
Can I get your heart Mr. H?
@rickyleung7614
5 жыл бұрын
Dude WTF man 😂😂😂
@elysha1980
5 жыл бұрын
Thank you very much for such amazing information you have shared, it is really helpful... I'm waiting for more video :)
@Kondratko
5 жыл бұрын
why isn't the bend allowance and your sight line distance not the same thing??
@rogers.jr.4997
5 жыл бұрын
great video. Really simplified the bending layout calculations for me. But what i cant find anywhere is how do you or how do you determine which side to measure the sight line from or is it just which side do you prefer
@bobbygeorge243
5 жыл бұрын
Cant finds either
@RyanANewman
6 жыл бұрын
This really helped a lot studying for my practical. Thanks!
@watchingyourback100
6 жыл бұрын
this way of explaining was better than my training we kept asking what is set back and the instructor at that time could not explain in a way that we as a student understood and he would call the class hackers which we replied with we are as good as our instructor so if we are hackers our instructor is a better hacker because he trained us
@commentatron
5 жыл бұрын
Here, I'll fix it for you: "thiswayofexplainingwasbetterthanmytrainingwekeptaskingwhatissetbackandtheinstructoratthattimecouldnotexplaininawaythatweasastudentunderstoodandhewouldcalltheclasshackerswhichwerepliedwithweareasgoodasourinstructorsoifwearehackersourinstructorisabetterhackerbecausehetrainedus"
@michaelegan6092
6 жыл бұрын
Sorry but I think you ought to get out of teaching and see a shrink.Absolute rubbish.
@usmanwater
4 жыл бұрын
nize that goof
@jcook8191
6 жыл бұрын
Best vid I’ve seen for this! Thansk
@ronbarton2276
7 жыл бұрын
you need to have it annealed first or buy it in {O} condition in order to bend it.
@ronbarton2276
7 жыл бұрын
you cant bend heat treated aluminum it will crack
@robbie4213
7 жыл бұрын
You never bent a piece of metal in your life lol
@alexanderpedrozo8027
7 жыл бұрын
Nice video very helpful and easy to understand
@Highjack31
7 жыл бұрын
Who else is trying to understand this bull for Paul C class?
@TheSEWARZ
7 жыл бұрын
I was hoping you would have posted more. Trying to prepare for my practical and its frustrating when you can't actually practice any of the hands on stuff.
@philipbarker7672
7 жыл бұрын
Please America, start using the metric system. It's way easier.
@yuvisehmbi7484
7 жыл бұрын
Philip Barker M
@gregvetch7494
5 жыл бұрын
No
@markpaul7887
7 жыл бұрын
Very helpful! Prepared for tomorrow
@kenwilson8024
7 жыл бұрын
Thank you! this explanation really simplified what I could not understand in the class. I have to start a four sided box tomorrow out of one sheet of metal. Will I have to take each total from the Developed Length calculation and multiply by 4 to have enough material for all four sides??????? Thanks for any help you can provide
@mikej7476
7 жыл бұрын
I hope you are not a sheet metal instructor cause you made that shit 100 times harder than it is and gave a lot on unnecessary bullshit!!! Please stop!
@ddaverowee
8 жыл бұрын
Thank you for this video it helped me alot :)
@djfoxalaska
8 жыл бұрын
very helpful and well done,
@PDZ1122
8 жыл бұрын
After thirty years of messing with aircraft, I have yet to come across a real world problem that required me to figure out bend allowance and set back. Bend the thing, then trim it! I think it was invented by the FAA just to be obnoxious.
@MadDeuceJuice
3 жыл бұрын
After thirty years you probably wasted several metric tonnes of metal with your technique
@PDZ1122
3 жыл бұрын
@@MadDeuceJuice Several cubic inches, yes. The upside is perfectly fitting parts.
@michaeljohn8905
7 ай бұрын
@@MadDeuceJuice everyone’s a CRITIC 🙄 😂JK You’re prolly correct though. As a pilot I need parameters and the same is true being a mechanic. I’d rather know how than not to know how. Also I’m a 4 year A&P apprentice who just got his 8610-2 and I need to know for my test. THANKS FOR POSTING THIS ! Liked and subbed !
@Soulstealer050
9 жыл бұрын
Thank you for this video. It helped me a lot. :)
@gbreconjumper
9 жыл бұрын
thank you i have my aircraft sheet metal test this morning. please explain the K factor in your next class
@MoneyMindsetForAll
13 күн бұрын
It's been 9 yrs since your comment.... How are you now ?
@billcraigcentury21
9 жыл бұрын
Easier to follow than the AC65-15A. thanks
@fabster6667
10 жыл бұрын
titays
@beechcraft12
3 жыл бұрын
you look like a fabian gavin
@hodge3007
12 жыл бұрын
Love the video and that must be a very fast Classic. I bet you beat many M and X's in your time! Nice looking Spinnaker!
Пікірлер