what about coloring it so it matches the rest of the building?
@mr.kenslifeshop4034
Ай бұрын
How wet or dry should the skim be before dashing? I tried to buy your listed float the link is no longer there thanks in advance your wall looked good.
@DevinLothian-co6lf
Ай бұрын
Great vido i use a spray hopper for doing spantex for the knockdown textures
@elvischeco4741
Ай бұрын
Bro you do great work homie Thank you for taking the time to show us all this From a real one to a real one ☝️ ❤️
@stephencarlsbad
4 ай бұрын
You can also spray la habra out of a drywall texture hopper. Make the texture mix on the wetter side and turn up the pressure on your air compressor to the max. Shake the hopper as you are spraying on the heavy orange peel so that it comes out easier.
@michaelblum8580
4 ай бұрын
Stick to painting your no plaster You're an apprentice at most
@user-lf7en6rf8m
5 ай бұрын
Excellent, I’m getting involved in more stucco patch work, thank you.
@ernieforrest7218
6 ай бұрын
Wow, thats a novel way to get mortar off of the hawk and onto a wall. Cant wait to see the texture demonstration. How come you only showed one method of applying the texture?
@bradleyb.425
6 ай бұрын
Great video. Thank you!
@uglycouzin
8 ай бұрын
Thanks man...this was really helpful. I completed my stucco repair project recently and your video was the best most comprehensive...especially for how to finish.
@bybryanwhite
8 ай бұрын
Thank you! Well done.
@chrisgraham2904
9 ай бұрын
The cracks between the blocks should be cleaned out and exaggerated with a grinder fitted with a masonry cutting disk and pre-patched. The repair area should be wetted with a bonding agent, or at least sprayed with water before the parging mix is applied to provide the best bond and prevent the blocks from wicking the moisture out of the parging mix too quickly to weaken the finished surface. If the light tan areas of the wall was previously painted, the paint needs to be removed and the parging mix applied directly to clean prepared concrete. Dip your dashing brush into a bucket of clean water before loading the brush with the mix and you'll find it releases from the brush with the flick of the wrist much more efficiently. Without these steps, particularly in a cold climate, the cracks will re-appear and the stucco will fall off of the painted areas within a year.
@dporrasxtremeLS3
2 ай бұрын
Thanks for this GREAT Comment! Do you have any videos on KZitem? I hope you do for all of us.
@user-bg4id4xv5i
9 ай бұрын
How long do you have to wait before you can Prime and paint
@sherry1418
9 ай бұрын
Hi if find someone to do your stucco work please let me no i am innyc looking for someone todo some repair please help
@sherry1418
9 ай бұрын
Hi do u have any one in NYC to do repair stock work please help
@rollthers3157
9 ай бұрын
Truly excellent. Thanks!
@theartsunnyshow2748
10 ай бұрын
What a great video thank you for taking the time to educate. I’m working on a a lot of patches and gunna use ure techniques.
@sukhvirsinghbrar237
10 ай бұрын
please provide LMIA me
@LifeIsScience1
10 ай бұрын
I’ve been putting off doing stucco repair (3 patches) for a few weeks now. I’ve seen a ton of videos since then, have all the material to get started just lacking the confidence and knowledge. And I gotta say this is the best video regarding stucco that I’ve seen on here, gave me the extra confidence I needed! Will finally be doing the stucco tomorrow, thank you!
@stephencarlsbad
4 ай бұрын
How did it turn out for you?
@user-xp9hv2zg1h
10 ай бұрын
Keep up the great work!
@chrismanfredi5205
Жыл бұрын
I'm a painter in orange county ca. I've always had a hard time doing stucco knockdown matching on my projects. Never even heard of that brush you use.. Picked one up and did my patches and they came out great ! Thanks for the video. Very cool
@bryanthroldahl9243
Жыл бұрын
Hello! My 495 just won’t stop priming. I can hear it change when I move from spray to prime or other way around.. but it will never catch. Is that a prime valve issue or do I need a rebuild kit? Thanks!
@makersandbreakers6612
Жыл бұрын
Awesome and perfectly explained. Thank you
@hikechoco
Жыл бұрын
Great demonstration. I now feel like I can do this job!
@huacachina1981
Жыл бұрын
A great video
@robcline9010
Жыл бұрын
Cool
@jenniferottolini8519
Жыл бұрын
awesome job! Thank you
@larryaldama1673
Жыл бұрын
Thanks from San Bernardino 👍🇺🇸
@larryaldama1673
Жыл бұрын
Thanks job 👍
@tatenadeau538
Жыл бұрын
Good video! I was daunted to patch up flaking texture on a Privacy wall. This technique is way better than my original plan. I had some basics with a color coat method but wasn't confident. This looks easier and assuming I get the texture on right I can change paint color without not understanding the grit product, paint, concrete mix that a bunch of these videos assume I know. I am back to thinking I can do this on my own.
@alexkeleman3099
Жыл бұрын
Thanks my dude! Got a little patch work done because of your video and a perfectly matched texture. Greatly Appreciated.
@brianmatthews4149
Жыл бұрын
Nice job guys
@zacharywright2458
Жыл бұрын
great video, its legit like texturing a interior rather then a hopper you use a small broom lol thank you
@M0D60
Жыл бұрын
Thx, SCP. These recent So. Cali storms knocked off all loose stucco (front of house). Your video helped.
@vincentchirafisi8803
Жыл бұрын
Beautiful!!
@richardpytel8078
Жыл бұрын
We got plastered alright
@marions2393
Жыл бұрын
Thanks for the info!
@JimJones-bp5id
Жыл бұрын
Nice vid!
@leonabrownlee5738
Жыл бұрын
Great how to video for knock down stucco!!
@CUBABLOCKMASONRY
Жыл бұрын
Hey Brother great video🙏🏽🙏🏽🙏🏽
@billybob-ih6lm
Жыл бұрын
Hang up those tools man, your a HACK. !
@johnnysparkleface3096
Жыл бұрын
Good job. Give yourself a raise.
@davidlindgren2448
Жыл бұрын
sure with you would have answered the obvious question: Is that $20 valve as good or close to the $90 Graco part?
@koolcruiserful
Жыл бұрын
I see a lot of the red duct tape on exterior job sites works very well. Doesn't leave all the goop behind that duct tape normally does
@squoctopus
Жыл бұрын
How would you do a corner? My house has windows on either side of the front door and "window frames"(don't know what the name is) around them. The corner got bumped into by the porch chair and broke/chipped off. Do I just use smaller amounts and somehow shape it after it's on? Thank you for any help!
@JesusPerez-tz4ib
Жыл бұрын
Thank you for taking your time to help others good Job keep up the good work
@albertadkins1050
Жыл бұрын
In South Florida we always apply bonding agent to the area first.
@tatenadeau538
Жыл бұрын
I'm in Phoenix and patching a cinderblock wall. I wander if I need this extra step too.
Пікірлер