I did exactly what you said but I’m getting a check gauge c and no data. Please help
@precisionmarine1544
5 күн бұрын
Check Gauge C will occur when not set up and programmed properly. Please review your Owner's manual and review This system activates when there is a communication error with the gauge. Adopt the appropriate measures according to the Owner’s Manual and it should remove this issue.
@nickrdgz9323
2 ай бұрын
I have a Raymarine axiom 9 and SMG4. If I use the Suzuki interface cable with the SMG4 and my axiom, will the SMG4 still operate?
@nickrdgz9323
2 ай бұрын
How do you install a Suzuki interface wire to that unit?
@chadtrexler8939
4 ай бұрын
You saved me a BUNCH of time. Would have never figured out switching the plugs. Thank you sir
@tiger6468
5 ай бұрын
Sir please Why my Suzuki display show engine no data?
@MrElsapo33015
7 ай бұрын
Would this work on older engines, 2008 suzuki 175 analog?
@christopherey7142
Жыл бұрын
Does anyone know of instructions for setting the initial settings on the SMG4? My LCD died and I need to swap in a new unit. The owners manual only says those settings are for your dealer. 🤔
@Eyball1972
Жыл бұрын
Mine lasted a whopping 2.5 years now I need to spend another $500, thanks Suzuki.
@TheHonro
10 ай бұрын
Should be under warranty.. Suzi now has 7yrs warranty
@Eyball1972
10 ай бұрын
Not on rigging or accessories. I checked with my authorized dealer, 12 months. Luckily I found a replacement on eBay for a discount. 😕
@timross7046
Жыл бұрын
Does you manual trim on your shifter and motor still work ? Will my fish finder gauge still work? What does the 2000 end up doing when you plug it into the smg4 to the existing data readings ?
@MLS1000
Жыл бұрын
Will my 2012 harness have the correct plugs? The motor is a 2023 and they just plugged it into the old harness. Trying to switch from analog gauges.
@fishski941
Жыл бұрын
I guess Suzuki just conveniently left out of the installation guide the part about switching plugs at the ECM. I was scratching my head trying to figure out why the unit wouldn’t power up. If it weren’t for this video, I’d be trying to return a defective unit. Kind of a key bit of info. Thanks Precision Marine for the video and great prices/customer service.
@ZethKinnettFishing
Жыл бұрын
New boat came with this. But it reads check gauge c and if plugged into grey port stays on and won’t shut off.
@alasdairmacfadyen1532
2 ай бұрын
Did you get a fix ?
@ZethKinnettFishing
2 ай бұрын
@@alasdairmacfadyen1532 yeah but it was a pain. I posted that over a year ago. Gauge was determined to be bad along with improper wiring.
@arikhancock
Жыл бұрын
I did the install like show but my gauge reads (check gauge c) and I see no data on my smg4.
@ZethKinnettFishing
Жыл бұрын
You ever figure it out? Mine says same thing and won’t power off when using the grey port. 2023 DF250SS
@bahamaboy1089
Жыл бұрын
@@ZethKinnettFishing Where was the digital harness plug on your motor? I can't find the plug to switch on my 250 Suzuki
@ZethKinnettFishing
Жыл бұрын
@@bahamaboy1089 its tucked back behind shit in the fuse box. gotta pop the cap off and look around for a grey port
@surferdad
Жыл бұрын
Thank You
@azoressubruicabraldemelo4480
Жыл бұрын
Dustin, Only works from 2015~ engines
@vikingone9852
Жыл бұрын
Just bought one and it it didn’t come with the harness? Do I have to buy it separately?
@azoressubruicabraldemelo4480
Жыл бұрын
Yes
@allycat1521
2 жыл бұрын
Thx!
@dustindudoit647
2 жыл бұрын
will this gauge work with twin 2012 df140's ?
@azoressubruicabraldemelo4480
Жыл бұрын
AZORES SUB Rui Cabral de Melo há 1 segundo Dustin, Only works from 2015~ engines
Пікірлер