I have that skid plate how tf do you get to the bolts in the back to pop it out like you did
@bronsondempsey7812
4 ай бұрын
Nvm you just yank it
@801sparky2
6 ай бұрын
Do you mean 750ml not 750 cubic cm ? Never heard that one.
@Bansheeman174
6 ай бұрын
I was going to get a krash but i heard it breaks all the time so i got a rickter ninja v2 pro with a 701 engine and 1 year latter swapped it to a 1200cc dasa
@azalldayson28
7 ай бұрын
Dope video thanks bro just got a 21 yz250 ❤
@GLeszega
Жыл бұрын
You don’t tq bolts dry. You will be way under torqued
@tylerseabook9423
Жыл бұрын
Was this filmed on a potato
@biggieswags6790
Жыл бұрын
How’s it held up?
@benselby6171
Жыл бұрын
Not good. Put a Yamaha 701 in it. Maybe I’ll do a video on it someday
@knowyuhgrow420
Жыл бұрын
How long before you start getting problems?
@benselby6171
Жыл бұрын
Like right away. I put a Yamaha 701 in it
@knowyuhgrow420
Жыл бұрын
@@benselby6171 oh ok I have a customer that had problems in the first hour on his 2021 foot rocket 1200
@kennethallison2168
Жыл бұрын
No need to brake clean threads some most bike mechanics put grease on drain bolt and it ML millilitres lol keep rippin bud
@XavierSabo
Жыл бұрын
Do yz250f use transmission oil?
@paulocampos6052
Жыл бұрын
FYI, the reason you SHOULD only fill up to where it starts to come out of the hole is because you can never remove all the old oil from inside, so if you fill it to 750, plus whatever is left in there, you are over filling it. Yamaha engineers know more than all of us and that hole was designed for a reason, telling people to ignore it is irresponsible since you don't understand the reasons behind it. Just some advice, apart from that good video
@benselby6171
Жыл бұрын
Never had an issue filling this way. I’ve seen damage from people under filling using the check bolt
@nastysoda9212
Жыл бұрын
@@benselby6171 same, I never used the side overfill bolt and been running yz250's for 25 years and never had an issue. I change the oil same as you.
@dantematurani3272
Жыл бұрын
is the transmission old and engine oil the same thing im confused never sone this before but both videos ive watched on each subject has been the same
@benselby6171
Жыл бұрын
It’s a 2 stroke so there is only transmission oil
@stevetyre9486
Жыл бұрын
Did you shorten the ride plate?
@benselby6171
Жыл бұрын
Yes flush with the hull
@dalechamberlain1043
Жыл бұрын
Which engine do you have
@benselby6171
Жыл бұрын
1200cc
@torariders313
2 жыл бұрын
dude I was running like 450ml of because of that check bolt. Damn!
@jeffbryner5355
2 жыл бұрын
Sounds soooooo good!! Brap!!
@About30Sloths
2 жыл бұрын
Is it the same steps for a 2001 YZ250?
@benselby6171
2 жыл бұрын
Should be, just check on the side cover to see how much oil it takes. I recommend shell rotella (t4) or yamalube
@5.0Zay
2 жыл бұрын
Definitely glad I watched this video thank you so much! I was only putting oil till it came out the side glad I only drove it up the street after and that’s it.
@bransno4859
3 жыл бұрын
I’m 14 about 190 pounds and like 5,10 would this be a good bike for me I ride trails btw.
@benselby6171
3 жыл бұрын
Yes, I ride trails as well. I’m 14 5,5 120 pounds and I still fit. I just had to cut the seat foam down a little. If this is your first 2 stroke I wouldn’t recommend it. Maybe a 125 would be better. But if u rode 2 strokes before this is a great bike. I switched from an 85 to this bike.
@MyOldSled
3 жыл бұрын
Cool video. That 6x6 Looks like a lot of fun.
@benselby6171
3 жыл бұрын
Thanks!
@JoelArseneaultYouTube
3 жыл бұрын
That Max 6x6 thing is kinda like an Argo, eh ? My dad used to work on Argos... I've ridden them a few times. Pretty fun depending on where you use them. Pretty tough riding a KX85 through slow, rough terrain like that eh. I used to have a RM 80 when I was much younger. They don't have a lot of down low grunt.
@benselby6171
3 жыл бұрын
Yea the max is like an Argo, just easier and cheaper to work on. The kx85 has no low end power lol it sucks going through slow terrain
Пікірлер