This channel focuses on restoring airsoft boneyard replicas and optimizing airsoft replica sniper rifles. In the future, this channel may also look at customizing DMRs.
can i ask if your going to do wasp? with SniperMechanics Tac-41 Cylinder Head GBB Version
@jeffairsonmagicshow5337
5 ай бұрын
Thank you so much for this great work, just one detail please : how many grams your scorpion piston (wich configuration alu and stainless parts) please ? Thank you again
@loganburden4920
8 ай бұрын
we need that next video its been 8 months
@enonock
8 ай бұрын
Thank you for these information~
@alanwilliamson1446
9 ай бұрын
Great work mate. Are you going to do a video on the 2 hopups. Would love to see it
@marcinmakurat1498
9 ай бұрын
It looks like there is not enough air for the brake?
@tarkkut9223
11 ай бұрын
Thanks bro 👍
@Diggilicious
11 ай бұрын
Would love to see the followup videos on the kracken vs standard hopup, as well as morpheus barrel. Even if you don't have a video, would love to hear your conclusions. I already have the kracken hopup and barrel, but I've never installed it given the performance of the Tac 41 has been awesome with just a new spring.
@johnvilaca
Жыл бұрын
Thanks for your excellent work! He helped me a lot!
@brassjunkie188
Жыл бұрын
So what did you go with running the tac 41 p
@brassjunkie188
Жыл бұрын
What would you run to get 100m plus in range an get 500 fps thats max on field i play
@billmaragos2812
Жыл бұрын
Insane, detailed work done, respect
@scarfacetmcz9517
Жыл бұрын
Hey man, love your videos.. i have a question : what is the best hop up position with an SB 150N Spring with 0.43 or 0.40 bbs (0.48 is too much powerful i think) ?
@airsoftfpsboneyard
Жыл бұрын
On the stock hop up I suspect you will end up somewhere between 5 and 7 on the dial. Each replica will be a bit different. The energy output would be quite high with 0.48g bbs and a 150N spring, probably around 3.5J.
@scarfacetmcz9517
Жыл бұрын
@@airsoftfpsboneyard you won't believe it, but i just tried now the 150N spring with hop up 0 and 0.43 i got 3.90 joules, with the 0.40 same hop up position and same spring i got less than that but still high power output. I also have the stock spring and a 120N.
@brassjunkie188
Жыл бұрын
Nice video man.. our field is 500 max an I'm really trying to get there with pin point shots
@kristjanpasar6993
Жыл бұрын
You are amazing. I hope you know that. The amount of work it took to come up with this is truly impressive. I have the TAC41, 500mm inner barrel, stalker hopup, 60 bucking from stalker, I use 0.48 bbs and 3 J+ from Rapax. I'm wondering, what kind of weight would you use and which air break? I wish to remain at 3 - 3.2J and be as silent as possible :) Thankfull for any reply!
@airsoftfpsboneyard
Жыл бұрын
Thank you for your kind words. I have tested a similar setup recently, 3J Rapax, Scorpion Piston at 57g with the FPS head, short air brake at its shortest setting and the Kraken hop up. It got 3.4J with 0.43g bbs. Your setup is quite close to this, you could go with a bit lighter piston to bring down the energy on your heavier bbs, and then adjust the short air brake until you are right where you want to be energy wise.
@Bruce_W.
Жыл бұрын
Could you do a video(s) of Teflon tape setup and sound difference? Also a video on suppressors.
@slgfranck8811
Жыл бұрын
Very nice review. I ve 2 questions : 1/Are the tests done with Hop up or without Hop UP? 2/ Why didn't you test de medium airbrake?
@airsoftfpsboneyard
Жыл бұрын
Hop up is set in the middle at 5. The medium air brake will give results between the short and long, it was skipped to reduce the quantity of testing
@rapaxsprings4813
Жыл бұрын
Good and detailed review. You really took your time to help people.
@airsoftfpsboneyard
Жыл бұрын
Thanks for the feedback, keep up the great work on the springs!
@kaiyincheung6227
Жыл бұрын
I want to ask a question about TAC41P🙇🏻♂️: Will the three screws that lock the barrel have the specified locking torque? If not, should it be locked tighter or not too tight? Thanks.
@airsoftfpsboneyard
Жыл бұрын
I tighten those 3 bolts until the outer barrel can no longer rotate. If the outer barrel cannot rotate, it cannot be removed
@kaiyincheung6227
Жыл бұрын
@@airsoftfpsboneyardMy concern is, does the tightness of the screw have any effect on the shooting or accuracy?
@airsoftfpsboneyard
Жыл бұрын
@@kaiyincheung6227 It shouldnt so long as you do not over tighten the bolts
@kaiyincheung6227
Жыл бұрын
@@airsoftfpsboneyard thx
@user-hc9hc8um4t
Жыл бұрын
I watched the video with great interest. Thank you for your hard work. I have one request. Please show a detailed comparison video of the stalker kraken TDC hopup chamber with the SB stock chamber.
@airsoftfpsboneyard
Жыл бұрын
Great suggestion!
@Tactisnacks
Жыл бұрын
Very well done videos! Will you be making the one you mentioned where you will cover the kraken hop up?
@airsoftfpsboneyard
Жыл бұрын
Thank you, I appreciate it. Yes, I am working on gathering that data now. I expect the kraken videos will start to release in early to mid April right after I finish releasing the scorpion piston videos (2.8J Rapax, 150N SB, Rapax Hulk).
@theoccasionalangler6956
Жыл бұрын
I have a tac41 A (stock 330mm barrel) with an advanced piston head and an upgraded silverback 100newton spring. With 0.46bbs and nearly full hop I am averaging 1.9j . What spring would you suggest to bump this up to my field limit of 2.3j . Thanks guy
@airsoftfpsboneyard
Жыл бұрын
Are you using an air brake?
@theoccasionalangler6956
Жыл бұрын
@@airsoftfpsboneyard I don’t fully know (I bought it 2nd hand) and I haven’t opened it up to see.
@theoccasionalangler6956
Жыл бұрын
@@airsoftfpsboneyard I assume it probably is using the longer airbreak and the original owner also added a silencer
@airsoftfpsboneyard
Жыл бұрын
@@theoccasionalangler6956 No problem, this will be a somewhat long response, sorry about that. If your Tac41 came with the other air brakes, you will be able to determine which is currently on the piston head. The set comes with 4 pieces. A short round cap (no brake), then a short, medium, and long brake. If you currently have the long brake installed, you could drop to a short brake or round cap and probably reach 2.3J without buying another spring. If you already have the short brake or round cap installed, then you will need to upgrade the spring. I've got to take a bit of a guess here since your barrel is quite a bit shorter (Tac41P is 510mm) which will lower your joule output compared to mine. Looking at some of the data on Silverback's website, with a 100N spring on 0.48g bbs, they show 1.8J with a 330mm barrel and 2.15J with a 510mm barrel (no hop up on either). So I will subtract about 0.3J from my data to try to compensate for your barrel, but this could introduce some error in the guess. Option 1: When I look at my data, I see 2.5J with a short air brake on a Rapax 2.8J spring, HopUp in the middle with 0.45g bbs. If we substract 0.3J, you will end up around 2.2J but with your hop up higher, you may end up right at 2.3J. However, I think you best bet is to go with the Rapax 3J spring. If you put it in your replica and it is too strong, you can always cut a coil(s) off, Rapax has a youtube video showing how to do this, or put on a longer air brake if you have the whole set. It is easier (and cheaper) to take away energy than it is to add it in most cases. Option 2: Silverback 120N spring, based on Silverback's data would put a Stock Tac41A at 2.28J with no hop up on a 0.48g bb. Adding a short to medium air brake with the hop up you will apply will likely keep you right around 2.3J. The air brake will take away energy but increasing your hop up will bring some back, they will likely offset each other. I hope this helps you out , sorry I could not give a more specific answer. Maybe I will look at different barrel lengths later in this video series.
@theoccasionalangler6956
Жыл бұрын
@@airsoftfpsboneyard thanks so much I really appreciate you giving me such a detailed explanation. All the best, Guy
@tripitaka1
Жыл бұрын
sorry great post but could you show sound test ie what it sounds like in set up its ok to say hay high power but sound is like hitting a hammer on metal plate while you cant hear any thing put your lucky if it has power to hit person 30 yeards away? keep up great work 👍
@airsoftfpsboneyard
Жыл бұрын
Thank you for the feedback, this is a good idea. Moving forward, I will include the sounds clips from some of the louder and quieter configurations in these videos. Generally, when the decibel ratings are high 80s, the Tac 41 sounds muffled. Anything over 95 is pretty loud, and over 100 sounds like a hammer. I will add in the recording of these sounds in the next video.
Пікірлер