Thanks for sharing. Immediately after this can i apply carpro reload over this or i have to wait for it to cure for 24 hrs? Thanks
@HobbyistPrinter
4 жыл бұрын
You can apply reload immediately
@yannickmarsolais8982
4 жыл бұрын
Using this product you dont need to Do the 4 pAss method? Up/down and then left/right by snall section
@1974gladiateur
5 жыл бұрын
Your application of the products is really bad. You should follow what it says on the bottle and then do it.
@santosboss
5 жыл бұрын
Sebastien What’s wrong?
@behindthen0thing525
4 жыл бұрын
@@santosboss everything
@totowolf9716
6 жыл бұрын
Meh...boss creams are better
@behindthen0thing525
4 жыл бұрын
Is that the same as cream from the levi jeans
@MadMoses56
6 жыл бұрын
what about using a flex 3401? what kind of speeds should i use?
@urbanedgeautodetailing
6 жыл бұрын
195th Moses since the Flex 3401 turns slower I personally use it between 4- 4.5
@behindthen0thing525
4 жыл бұрын
@@urbanedgeautodetailing i recommend settings 15 to 48
@RB54DaBears
7 жыл бұрын
Great video bro! Did the Tahoe have Cquartz applied to it prior to this video?
@urbanedgeautodetailing
6 жыл бұрын
Rdetailing if the Tahoe had Cquartz applied prior to polishing he would have used Essence Plus instead. It is designed specifically for polishing ceramic coatings.
@1974gladiateur
5 жыл бұрын
CQUARTZ go on as a protector.
@zclee
7 жыл бұрын
Do you notice a difference in gloss when using a MF finishing pad and he CarPro Gloss pad?
@behindthen0thing525
4 жыл бұрын
Uttered
@saulmunoz3731
8 жыл бұрын
Does CG hex foam pads work with this? White and orange?
@floormatio
8 жыл бұрын
Yes
@4u2nvinmtl
8 жыл бұрын
Can the pads be reused or should they be disposed of?
@1974gladiateur
5 жыл бұрын
You clean your pads between every pass you do on a panel and you clean your pad after the job and keep it for the next one.
@behindthen0thing525
4 жыл бұрын
The pads get full of filler material. A cutting pad then becomes a finishing pad
@lefousuisse
8 жыл бұрын
no eraser after correction ? Because i'm afraid carpro essence contains fillers...
@TheCeki1982
8 жыл бұрын
You don't need to use eraser.
@iqcarlospinzon
8 жыл бұрын
+MS Detailing What happends if I use it?
@lefousuisse
8 жыл бұрын
If you use carpro essence for correcting, you need to use eraser to see if the swirls are really removed. But if you use for FINISHING, you don't need to use eraser (sorry for my english, i hope you understen.
@1974gladiateur
5 жыл бұрын
You use eraser after you finish with the polish.
@1974gladiateur
5 жыл бұрын
@@lefousuisse sorry you have to use eraser after the correction is over. I mean the compound and polish stage, after you remove the oils that those products leave on the paint to after put your favorite paint protection.
@kurtkarasch8768
8 жыл бұрын
So does this product have diminishing abrasives?
@behindthen0thing525
4 жыл бұрын
Both
@razorblatter
8 жыл бұрын
Its CarPro not Car Pro. A small detail but details matter when you are looking for stuff. So I would like to suggest to edit the title... ;-)
@NickM1013
6 жыл бұрын
razorblatter How did that work out for you?
@behindthen0thing
5 жыл бұрын
@@NickM1013 not well
@behindthen0thing525
4 жыл бұрын
@@NickM1013 whats carpro
@NickM1013
4 жыл бұрын
Behindthen0thing its one of the most sought after endangered species in Central America. Never before caught on videotape.
@masaoke22
8 жыл бұрын
Does it work as a primer before coating ?
@iqcarlospinzon
8 жыл бұрын
+stevan pawiro before coating with cquartz? Yes!
@texfromro
8 жыл бұрын
+stevan pawiro But u have to leave it sit a couple of hours before applying cquartz
@behindthen0thing525
4 жыл бұрын
You have to wait 30 days before coating with thinkware eucuartz800
@coreyc1150
8 жыл бұрын
Thank you Kenny! Great video!
@AHigherPerspective
8 жыл бұрын
Thank you for putting this video up. This stuff is black magic! From what I read it seems that you can fills really well and lasts almost a year. Have you experimented with a cutting pad to see if it can be used on a slightly worn paint? I know its not going to be a permanent fix like a good paint correction but I am just curious as it might be useful for customers who dont have deep pockets and wanting good results.
@behindthen0thing525
4 жыл бұрын
Yes
@vonporatbilvard3352
8 жыл бұрын
Looks wicked! Great video. I haven't tried mine yet. Thank you for sharing.
Пікірлер