The Iwata Neo wants to pull money from the cheaper companies. For $60-$70 you can have the great feel and build from Iwata . Granted , it's no Custom Micron, or an Eclipse but it's close enough to the Eclipse. The Master is good enough to practice with. Especially coming with 3 different sizes. Start with Master and if you need to have multiple guns , use NEO.
@mpikas
8 сағат бұрын
How much paint are you getting out of a 12oz Rustoleum can? 12oz should be almost 360ml, the propellant gas bubbles probably add some to the volume, and the biggest bottles you linked are 240ml, quite a bit less. I always assumed that they packaged spray paint by how much you get since a 12oz can is bigger than a 12oz beer/pop can.
@AsimPaints
7 сағат бұрын
The white paint was the only one completely full, and there was only a small amount left in the can after pouring, so even before letting the gas propellant mixed in the paint degass, I'd estimate it's no more than 300ml.
@vincehatina6987
Күн бұрын
Can you substitute denatured alcohol for the isopropyl alcohol
@AsimPaints
Күн бұрын
I'm not 100% sure, might be worth trying to make a tiny batch to see how it reacts to paint.
@clydeterry2289
2 күн бұрын
🤔🤔🤔hummmm Could that be a fire? Hazard .... paper towels?Alcohol chemicals near that space for heater 🫣🫣🫣
@AsimPaints
2 күн бұрын
It definitely is but I'm careful and live on the edge lol. I have a fire extinguisher handy. No issues in three years of printing.
@rakenajyzas7625
6 күн бұрын
Do you know what materials are used to fill gaps when connecting model parts? and when painting, is it necessary to apply a coat of paint before applying color? If so, please tell me the names of those materials.
@AsimPaints
6 күн бұрын
There are quite a few options to fill gaps! Bondo spot putty, Mr. Surfacer 500, wood filler, two part epoxy clay, miliput, Tamiya putty, you can cure 3d print resin or uv resin with a uv flashlight, and so much more. Just keep in mind most of these products are meant for shallow fills, so for larger gaps either use epoxy clay or do repeated thin layers instead of trying to fill it all at once. And before painting, once the parts are prepped, you want to use primer. You can get spray paint primer, or if you plan on using airbrush paints each manufacturer will have primer.
@jj-icejoe6642
7 күн бұрын
Thank you for this interesting video. I'm wondering, when you drill the hole in the spray can, aren't there any iron filings that fall into the paint ?
@AsimPaints
7 күн бұрын
Thanks for watching! I haven't had any issues with filings, as before I puncture through I try to brush off all the filings from the bit and can with my finger. Haven't had an issue with any clogging my airbrush, but you can always use a strainer to be extra careful.
@roncarroll4531
12 күн бұрын
Have you made any videos with the paint that you procrssed from this rattle cans? Chrome and Gold Chrome ? thanks
@AsimPaints
12 күн бұрын
Yes, if you look at that Pokeball video I did under my Painted Projects I used a couple of them!
@btcbob11392
13 күн бұрын
Why don't you just spray the paint into a small glass jar and then let it sit to degass. A whole lot less trouble and you still have a spray can to be used in the normal way should you choose to.
@AsimPaints
13 күн бұрын
That's great if you just want a small amount, but for doing multiple cans I think this method is easier. Just learn from my mistakes and you won't make a mess lol
@charlesrestivo870
13 күн бұрын
OK ok get to it already geez
@AsimPaints
13 күн бұрын
KZitem has a 1.5x and even 2.0x speed.
@cutemew151
15 күн бұрын
I forgive you for using spotlight. I love feline pokemon. I both want him to live and die because I'd like to see him in the play, but also as a statue.
@AsimPaints
15 күн бұрын
Just a one time thing! And yeah, Zeraora 3d print would be awesome
@cutemew151
15 күн бұрын
Im playing a nuzlock of emerald too! Rip drednaw
@AsimPaints
15 күн бұрын
Good luck!
@ELPADREAIRBRUSH
18 күн бұрын
Will this harm an airbrush in any way like with my O rings or my nozzle ? Cause I have like IWATA custom microns and that would suck if it damages the inner workings ??
@AsimPaints
18 күн бұрын
Treat it like a stronger solvent based paint than lacquer, just be careful it doesn't spill out the cup and you should be fine. If your airbrush can handle lacquer paints you should be good! You might want to have a dedicated brush for spray paints though as it is pretty difficult to clean.
@heribertogomez7
18 күн бұрын
Wow the spray paint on the air brush looks very good and cheap thanks
@johnmichaelfalo5907
19 күн бұрын
I haven’t had luck using these and not destroying my rubber seals 🤔
@bladerj
22 күн бұрын
you made us learn from your mistakes, you get a sub.but wouldnt be better to just peel the top off, instead of drilling to remove the paint ? also i guess a vacumm chamber would remove the gas ?
@AsimPaints
21 күн бұрын
Peel of the top of the spray can? Like the nozzle and spray valve? I'm sure you could do something like that. A vacuum chamber would definitely help speed up the removal of propellant from the paint if you have one! Thanks for watching!
@DRaKe6900
27 күн бұрын
I've had an issue where when I merged the two objects, it distorted the mesh of the larger piece
@AsimPaints
25 күн бұрын
Did you use the "combine" function or did you do the boolean union as shown? Sometimes Meshmixer glitches out, so I've had to redo the work and the second time it works fine. Just make sure you match the settings shown for boolean union/subtraction.
@DRaKe6900
21 күн бұрын
@AsimPaints I used the boolean union. What I'm trying to create pegs for is long, flat, and symmetrical. I'm putting pegs on either side. The first peg is fine, but the second peg I try to do causes the mesh above it to dip down
@AsimPaints
21 күн бұрын
@DRaKe6900 hmm I'm not exactly sure I understand, but if you're doing multiple pegs on the same part, consider exporting the file as an obj after the first one, then reimport it and add the second.
@edwardhood6252
28 күн бұрын
The one thing I would do that you didn't mention is that I would use a piece of masking tape to label the bottles of decanted paint with brand and color.
@AsimPaints
28 күн бұрын
Good idea!
@treich1234
Ай бұрын
Tap the can with a small nail to degas,. Leaving the nail inside will slow the propellant's release to avoid any paint spray Later tap another hole to vent the can before pouring contents out Easypeasy
@thebadguy1977
Ай бұрын
Dude ur awesome. I just did this with an awesome rustolium mettalic blue and it's the best paint job I have ever done. This is a game changer!
@AsimPaints
Ай бұрын
Thanks! Happy painting!
@jimspc07
Ай бұрын
If you cut the can just below the rim you can let the air out with a small cut. Then when the gas stops cut around half of the can and make a spout then pour out the paint and the ball bearings at once. Do not cap the paint for a while to let absorbed gas free then check frequently after capping for a few hours or days. Cold will take days high temperatures will degas quicker. Drilling the can on a curve can be dangerous. Fingers do not like drills and if the small drill breaks it is likely to make a bit more mess in the thumb than a small hole. Don't forget good drills also have sharp edges on the lands (sides)
@dungo6076
Ай бұрын
Love your series :)))
@AsimPaints
Ай бұрын
Thanks!
@j3lloshot
Ай бұрын
tip: tape a magnet to the bottom of the bottle so that the bearings don't block the dispenser
@GrizzlyTruck
Ай бұрын
Turn the spray can upside down and spray until the pressure is gone. The paint should remain in the can as its not being sucked up by the tube inside the can. Then after the can is out of pressure just drill a couple of small holws in the bottom of the can. Tip the can towards one of the two holes, the paint should pour out?
@AsimPaints
Ай бұрын
Just keep in mind some spray cans are designed to be sprayed from any angle, so even upside it'll spray paint. Thanks for watching!
@gregweber7325
Ай бұрын
Good video but too long. Glad he didn’t have to drill multiple holes. Good trick for airbrushes.
@jackjax532
Ай бұрын
My friend, will you please tell me how you removed the cap off of the Rusto Universal can? Thank you.
@AsimPaints
Ай бұрын
I just broke it off. Slide a screwdriver under it and force it off.
@jackjax532
Ай бұрын
@@AsimPaints haha thanks!
@Katieluv2sing18
Ай бұрын
That's so cool! It's like keeping your memory of that Pokémon alive if that makes sense
@AsimPaints
Ай бұрын
Thanks!!
@Katieluv2sing18
Ай бұрын
@@AsimPaints and the 3D printed Pokémon look great and are painted well!
@AsimPaints
Ай бұрын
@Katieluv2sing18 thanks! I got more coming!
@Katieluv2sing18
Ай бұрын
@@AsimPaints I don't doubt that
@BigRigCreates
Ай бұрын
They look so good, its like you have a taxidermy of your dead Pokemon. In memoiam of Excadrill 2024-2024
@AsimPaints
Ай бұрын
Thanks! Yeah exactly lol
@pepecr6179
Ай бұрын
Dude Excadrill is my favourite pokemon of all time, im sad he died but im in love with the figure, keep up with the great work im loving it!!
@AsimPaints
Ай бұрын
Glad you liked it, thanks so much!
@crimsonshadowjj7935
Ай бұрын
Excadrill😢 you will be missed
@AsimPaints
Ай бұрын
RIP Excadrill 😔
@brandonfazbear4219
Ай бұрын
2:55 My boi! He be round and friend shaped! Also, I think Team Sky is having a grudge against you with both losses from flying types. What did you do to anger them?
@AsimPaints
Ай бұрын
Lol idk but I might have to go to war with Mikey at this rate!
@brandonfazbear4219
Ай бұрын
@@AsimPaints We must send him a message if this keeps up! He can't keep getting away with it as he rules the skies!
@AsimPaints
Ай бұрын
Episode 2 is out: kzitem.info/news/bejne/0aRotXeGhX-edIIsi=aFcp3ZBDvQ-n0MBN
@raiden8502
Ай бұрын
*PromoSM*
@brianwills4398
Ай бұрын
What size are those bottles your pouring the paints into? Perfect size
@AsimPaints
Ай бұрын
240ml, linked in the description!
@tumama001
Ай бұрын
Hi, any chanche for the custom color mix video?
@AsimPaints
Ай бұрын
Eventually yes!
@mrthomasyip
Ай бұрын
I diy my thinner and tried using it with the Mr Hobby model paint. I am not sure if I did the mixing in a correct ratio but somehow I had my airbrush kept clogging up. Did I not get the paint-thinner ratio correctly or is the alcohol make the paint faster in drying inside the airbrush chamber??
@AsimPaints
Ай бұрын
Mr. Hobby is a lacquer paint. This thinner is for acrylic water based paints only! Trying to mix anything but lacquer thinner with a solvent based paint like Mr. Hobby will cause issues like that. Even if it's their Aqueous "acrylic" brand, it's still solvent based like Tamiya, and this thinner won't work for it.
@mrthomasyip
Ай бұрын
Got it, will revert back to the Tamiya/Mr Hobby thinner instead. Thank you!❤
@crispyjokingtuna1495
Ай бұрын
May drednaw rest in peace. I think you hit a good balance between the print and nuzlocke footage. As for the nuzlocke itself, I’d recommend implementing a level cap to keep things slightly more challenging and interesting for you. You’re handling it really well
@AsimPaints
Ай бұрын
Thanks a lot! And yeah I'll definitely do a level cap in the future
@syweb2
Ай бұрын
Very cool! I've seen some others use this model in prints, and something cool they did is sand down the domes a little to remove the polygonal look, which is somewhat present on this one. I love the paint job you did on this, by the way!
@AsimPaints
Ай бұрын
Thanks! I actually considered sanding the polygonal texture after priming but i kinda thought they added a technological look lol. Plan on doing the same with the other balls in the future!
@user-zx2ti2lo9g
Ай бұрын
Great video! I'm definitely going to try this. 1)Since a spray can is typically 12oz(350ml), will one can fill six 2oz(60ml) squeeze bottles? 2)Does it matter if cans are room temperature or hotter/colder when I drill into them? 3)What's the shelf life of the paint after putting in bottles? THANK YOU!
@AsimPaints
13 күн бұрын
Thanks for watching! 6 2oz bottles might not be enough, as I would also recommend adding thinner to the paints. You don't want to drill into a hot can, pressure builds up as temps increase. And the shelf life is uncertain, I still am using bottles that are over half a year old.
@deputy3690
Ай бұрын
Great video! Do you sell any of your 3D prints? I am interested in learning what I need and how to 3D print the exact figures you print. A how to 3D video would be great to see also.
@AsimPaints
Ай бұрын
Thanks! I do sell my prints! Check out some of my painted project videos to get an idea on the process. In the description I have a ton of tools I recommend, but I'll do a in depth beginners video on exactly how to 3d print and paint your own figures.
@ArtistLunatalia
Ай бұрын
I'm excited for future updates on this one, so I'm definitely subscribing to keep watch. This romhack seems really interesting, since it's a nostalgic old setting with a modern Pokédex. While normally I'd say to avoid the spoilers, I think seeing the Dreadnaw figure in the thumbnail was actually a huge draw for me to check out this video. The format is great to me, minus the very loud recorder music in honour of your fallen boi, haha. My poor ears and your poor Dreadnaw.
@AsimPaints
Ай бұрын
Thanks for watching! And I thought the same about the romhack, I haven't played any of the new games so this was a way of experiencing new Pokemon in a familiar format. Also much more potential options for 3D prints as opposed to just old Pokemon. And yeah, I'm having a hard time figuring out how to advertise the video without spoiling who ends up dying. Glad my thumbnail got you lol. Next one should be out soon!
@davidsainato1007
Ай бұрын
I've reported this video for misinformation. This is a dangerous thing to do. DO NOT DO THIS!
@davidsainato1007
Ай бұрын
Instead of drilling into a pressurized can, which is really fucking stupid, get a can of wd40 with the nozzle and hose. Use that nozzle and hose to transfer the paint.
@AsimPaints
Ай бұрын
It's only stupid if the person with the drill is stupid. It's only pressurized until it's not lol.
@mcflurryjoemomma8484
Ай бұрын
I love when people make projects about pokemon and i love seeing the final product in forests/outdoor settings. This would be a fun series to continue❤
@AsimPaints
Ай бұрын
Thanks! I plan on it!
@brandonfazbear4219
Ай бұрын
Gotta pay respects to our fallen Comrade, Dreadnaw. Their efforts were not in vain for their contribution to the team. I'm sure that PumpkinPlushness will take good care of the Dreadnaw. If I was to give Dreadnaw a name, I would give the name, Maw.
@AsimPaints
Ай бұрын
RIP 🙏 Maw is a good name, I think I'll definitely start nicknaming my mons going forward just to personalize the 3d prints more
@brandonfazbear4219
Ай бұрын
@@AsimPaints Ye. It really makes a stronger connection with the mons you do have and makes any losses just that much more personal. Glad that PumpkinPlushness shared your video. You both got amazing concepts to help make Nuzlockes feel fresh and makes your videos stand out in such creative ways.
@crimsonshadowjj7935
Ай бұрын
I love this idea! You should do something special for you champion team. If you win😅 maybe put a championship medal on them? Or a trophy with their images on it? Be a cool way to commemorate winning your first nuzlocke.
@AsimPaints
Ай бұрын
Thanks! I'm open to ideas on the surviving champion team, assuming I even get that far lol.
@Squatle
Ай бұрын
This is amazing! Just getting into it, but I want to build lifesize pokemon
@AsimPaints
Ай бұрын
Be careful, it's addicting once you start lol
@Chihuahua0907
Ай бұрын
That drednaw looks stunning, keep up the good work!
@AsimPaints
Ай бұрын
Thanks a lot!
@Chihuahua0907
Ай бұрын
@@AsimPaints You're very welcome! I look forward to seeing more!
@pumpkinplushness
Ай бұрын
Just watched it all x3 !! Thank you for the poor lil Drednaw! I'll take care of it! I liked how you showed how you print then and paint ! I hope you start to name themmm! Thanks for showing my stuffs too hehe its all so very cool! Hope you make more episodes :D
@AsimPaints
Ай бұрын
I probably should nickname them to make them more personal lol. I'll definitely make more. I look forward to more of your content too!
Пікірлер