Hey dude, I know this video is quite old, but maybe you have some advice. I went to install these on my 2024 Ninja 650, and there is barely any room for me to grt my hand in there to secure the nut on to either of the bolts. I'm kinda stranded until I can get this done. Please help if possible.
@JeffreyMcFarland-b6y
4 күн бұрын
Aye bro did you get it figured out, planning on doing it on mine todat
@iamRJANO
4 күн бұрын
@@JeffreyMcFarland-b6y @JeffreyMcFarland-b6y yes, do one side at a time for sure. For the nut, when trying to put it back in place, make sure you out the nut where it's supposed to go before putting the sliders all the way through. Once the nut is in place, hold it there and tighten the sliders all the way. Once one side is done, do the other. If you don't do one side at a time, the engine will sag heavily and you're gonna be pretty much fucked without anything to lift it back up.
@iamRJANO
4 күн бұрын
@@JeffreyMcFarland-b6y my mistake was trying to put the nut in place after the sliders were all the way in. Pretty dumb mistake, but I figured it out lmao.
@edwardbell833
3 ай бұрын
Any concerns with water or is it waterproof?
@jordyb4670
4 ай бұрын
Hey, does it also fit on a ninja 2024?
@alexpark6071
4 ай бұрын
Thank you. Just installed it on mine. Just one thing. You dont need the zip tie. You can remove the fake one and the 12 v connector can be clipped on its place. I don’t understand why don’t Kawasaki just add this from factory!!! Probably cost them less than $5 bucks.
@bandog1361
4 ай бұрын
Does this work on the 2024 Ninja 650
@yourFriendly650
3 ай бұрын
Judging by the pictures of the 2024, they look to be pretty identical. So it should relatively be a very similar setup.
@BU683AR
5 ай бұрын
Nice, saved this for later, thank you for the clear and step by step process
@apoffs
5 ай бұрын
great vid
@toxicthreat4350
5 ай бұрын
Absolutely worst time of my life doing the installation on my 24 ninja 650
@jamesj2941
6 ай бұрын
Bro , can you tell me how to adjust the side mirrors of 2024 ninja 650..
@hectorcortes7246
5 ай бұрын
Adjust the mirrors? You just move it from the big part whichever way you need. Please explain more in what you need help
@kctisher-yc4xd
6 ай бұрын
FYI to anyone doing this to their 650 the engine does droop down. I had to to jack it up about a quarter inch
@Fernanditodelao
6 ай бұрын
Did you just put it under the exhaust or where did you place it
@jaddgamby
7 ай бұрын
Tried this but the engine had too much weight on the left side bolt. So I gotta go in and have the jack the engine to do it. Not sure why I'm the only one who needs to do this
@kctisher-yc4xd
6 ай бұрын
Same as well
@christopherself4098
5 ай бұрын
How did you jack up the engine in that scenario? Did you just put the jack on your exhaust?
@garyboyce6186
8 ай бұрын
I have some on my wife’s 400 there are lower profile and don’t stick out so much, with yours I would be worried it would torque and bend in a simple tip wrecking the bike more. Especially in a slide situation. Is that the case. You just want slides to stick out just past highest point of fairings. Every bike should have these for the unexpected low speed tip
@yourFriendly650
7 ай бұрын
I can definitely see your point, funny enough I did drop her for the first time after installing. I was completely stopped in the parking lot and tipped over. Fortunately, I can confirm it did not bend on the left side and protected the bike real well, no scratches haha
@mortman2952
8 ай бұрын
Will it still work without the key in?
@yourFriendly650
8 ай бұрын
No, the bike needs to be on for it to work
@Stamatos
8 ай бұрын
Great video, just ordered my outlet and I'll be using this as a guide for my 2024 install.
@killertactics418
8 ай бұрын
Should’ve gon with TST their eliminator is nice and if u really want to have a light they have that option too
@killertactics418
8 ай бұрын
I can show u how it looks on my 2023 650
@amalthomas2742
8 ай бұрын
Hey man, thank you for the step by step instruction. This was very informative and made my process way easier. Now mine looks cleaner than ever😍. Ride safe brother 💚
@yourFriendly650
8 ай бұрын
Glad to hear it, ride safe!
@dknightrider900
9 ай бұрын
What brand are the frame sliders? Thanks in advance!
@yourFriendly650
8 ай бұрын
The brand for the sliders is Shogun. I have a video on my profile with an amazon link to the product if you'd like to check it out!
@Neldogz
10 ай бұрын
Good job !
@donniehenderson5298
10 ай бұрын
There aren’t many detailed videos that walk us newbs through this process, at least not in English. Great walkthrough, was able to get mine installed this morning!
@yourFriendly650
9 ай бұрын
Glad to hear it!
@levilaughlin6262
10 ай бұрын
How long did it take you total? I got my kit from the dealership so maybe the wiring harness bike will be big enough
@yourFriendly650
9 ай бұрын
Not including the extra drilling I had to do and if you're a newbie like me it should take you about an hour or so. Maybe less if you're more experienced working on bikes/cars
@aobregon88
10 ай бұрын
What website did you order the outlet charger from?
@yourFriendly650
9 ай бұрын
I left a couple of links in the description of the video, one for amazon and another straight from kawasaki
@joshluca763
10 ай бұрын
Thank you.
@yourFriendly650
10 ай бұрын
No problem!
@maxx_life
10 ай бұрын
Ive been thinking of getting these also, i wonder about the intergrity of those new bolts compared to the stock ones, with them being such a cheap price
@panda4757
8 ай бұрын
Good quality bolts aren’t pricey, go to your local hardware store and look around.
@maxx_life
8 ай бұрын
So because you can buy good quality bolts at a hardware store, the bolts in this kit are as strong as stock?
@panda4757
8 ай бұрын
@@maxx_life exactly, if you feel they are not up to par you have options especially at that price point although I’ve seen many people run shogun frame sliders without problems.
@iamthelaw69
10 ай бұрын
Sounds like everyone's just working on their cars in your parking lot lol
@adamzoubi7018
10 ай бұрын
What is this for? Is it supposed to protect the bike if dropped?
@yourFriendly650
10 ай бұрын
Yep, that's pretty much it!
@leny5543
11 ай бұрын
Are you doing the front and rear sliders too?
@yourFriendly650
11 ай бұрын
@leny5543 Yes, I plan to upload shorts for those since they are pretty quick!
@YourAverageG20
11 ай бұрын
Getting my 650 next month, glad I found this vid and now I know just how easy it is to install. Great simple and quick video, safe riding 🤙
@RandySoWavvy
Жыл бұрын
Nice I just bought a black 650 planning to install sliders and engine guards soon. Did you ever install the wireless charging to your Quad Lock?
@yourFriendly650
Жыл бұрын
@nikky50000 I have not, unfortunately the quadlock I had on this bike would get loose and just got tired of it. Currently have a hex ball mount with a ram extension and quad lock ball adapter on it. I'm not sure if the wireless would fit on it but I can definitely take a look! For now, I use the 12V Power outlet to charge it. I'll have a video coming soon on how to install that 😁
@yourFriendly650
10 ай бұрын
I apologize for taking so long to get back to you, to answer your question the ball adapter quad lock mount actually does fit the wireless charger mount. I'll be doing a video soon on how to install, I just gotta figure it out myself first haha
@joshboyer542
Жыл бұрын
Same bike gang and same sliders too
@GetOffIt
Жыл бұрын
Same bike and slider gang 😎
@stephc4427
Жыл бұрын
About to do this on mine as well. Thanks for the vid.
@chrisbaillargeon5700
Жыл бұрын
I got a 2022 Ninja 650. Thanks for the link and showing how easy it is man! Any Chance you know what that other ratchet tool is called now?
@yourFriendly650
Жыл бұрын
Hey @chrisbaillargeon5700 , I apologize for the late reply, the other tool is just a ratchet with a hex bit socket! If you google it, you should be able to find them at harbor freights. Size H8 in this case
@chrisbaillargeon5700
Жыл бұрын
Much appreciation. Thanks for getting back!@@yourFriendly650
@motolad
Жыл бұрын
Same bike gang
@Karnap0100
Жыл бұрын
Just got mine 2 days ago
@B-ry3
Жыл бұрын
Same bike gang.
@B-ry3
Жыл бұрын
Also gave you a sub.
@yourFriendly650
Жыл бұрын
@@B-ry3 Appreciate it my dude, sending you a sub as well!
Пікірлер