Hola Que tal va el Stage de hierro en tema potencia? Me estoy planteando entre este y el de aluminio pero no se por cual decidirme por no haber casi nada de informacion sobre el streetrace
@fullthrottleES
11 күн бұрын
Street race is really slow, get the stage 6 big racing its very fast
@emilft
21 күн бұрын
what year mrt?
@undergrounddrift187
Ай бұрын
im with de same setup but im only having one radiator? is that too bad ? T_T
@fullthrottleES
22 күн бұрын
You need 2 radiators if you live in a hot climate. But even in a cold climate i recommend you just always check the temperature of your cylinder when driving.
@undergrounddrift187
21 күн бұрын
@@fullthrottleES it gets very hot here during summer so I bought second brand new radiator from kx85 :)
@arrangrant168
3 ай бұрын
Were you still running an oil pump with this setup?
@martinsrensen7886
3 ай бұрын
What size dritrain you got? I Also have MF 70cc cylinder with 50-70 exaust, Currently i am using 14-56 drivetrain, but it only goes 110, any tips?
@painthunderexe
3 ай бұрын
you mean sprocket?
@stanislawchmielewski26
3 ай бұрын
He has 14-48, his setup is in the description of the video
@fullthrottleES
22 күн бұрын
If you put 15-48 you will get about 130 even with a lower powered cylinder, acceleration will be weaker but gears will feel much longer which is also nicer. Buy a 77 stage 6 big racing and a reinforced crankshaft, an mvt dd ignition, 28mm carb and newfren clutch disks (5disks) youll have 20 horsepower and with 13/48 youll hit about 125kmh but the acceleration is mental.
@katrinwandrey6427
7 ай бұрын
Top speed ?
@fullthrottleES
6 ай бұрын
I hit like 130 gps but my speedometer said 143kmh
@romanmussmann5910
7 ай бұрын
😍😍
@BlancoBeatsOfficial
7 ай бұрын
🏍️💨
@wiktorbak4171
8 ай бұрын
what jets are in the carburetor
@MadeItWork
3 ай бұрын
probably between 100-110 Main Jet. and 50-55 secondary nozzle. With a 19mm carburetor. On a AM6 engine
@respectfullyright
2 ай бұрын
@@MadeItWorkwhy not a 21mm jet
@jejex6919
Ай бұрын
@@MadeItWork he has a 28 hahaha
@MadeItWork
Ай бұрын
@@jejex6919 😧 so big??
@joonap4948
4 күн бұрын
@@MadeItWork its not even big my cousin said he wanted a bigger one when he had a 70cc airsal with 28mm
@arnas5313
8 ай бұрын
you’ll kaboom your engine if you keep engine braking 😂😂
@fullthrottleES
8 ай бұрын
It did kaboom 😭😭
@respectfullyright
2 ай бұрын
Why is it bad
@arnas5313
2 ай бұрын
@@respectfullyright starves a 2 stroke engine of oil, if done once it’s fine but if it’s constant it will lead to higher wear and eventually engine failure
@respectfullyright
2 ай бұрын
@@arnas5313 So i should just use front and rear brake and not engine break?
@nooa7858
2 ай бұрын
@@respectfullyright yes with clutch in
@mee.toeihin2792
Жыл бұрын
stop engine braking😢
@respectfullyright
2 ай бұрын
Why is it bad
@syrice
Ай бұрын
@@respectfullyrightEngine braking is bad for a two-stroke engine because it reduces the flow of the fuel-oil mixture, leading to inadequate lubrication and potential engine damage.
@respectfullyright
Ай бұрын
@@syrice my dad has been riding 2 strokes for over 40 years since he was a kid and he said he has been engine braking and no problems and same with me
@user-ny6ny1ec1t
Жыл бұрын
Could you please show how you removed the ecu limiter
@aleksanteri1234
Жыл бұрын
Before you would need to take the b5 cable from the ecu but it doesnt work anymore i think you need to drill the ecu but im not sure
@ServeraServera0
Жыл бұрын
@@aleksanteri1234 So you are telling me I have to spend 70 euros or even more on a derestricted one?
@aleksanteri1234
Жыл бұрын
@@ServeraServera0 it depends what model do you have if you have 2018-2020 you can take the b5 out but if it's 2021-2023 it doesn't work anymore. And if it's older than 2018 you would need to drill the ecu. The euro 5 models have some kind of chip in the ecu that the restrictor restricts from the main cable that goes to the spark plug.
@ServeraServera0
Жыл бұрын
@@aleksanteri1234 Guess I will have to change it out And what do you mean by drilling the ecu on older models?
@aleksanteri1234
Жыл бұрын
@@ServeraServera0 older models had a spot for drill and i guess it had some chip there because drilling it would remove restriction completely.
@CC_paul122-nj3qc
Жыл бұрын
Que haces con un 28 para un 70 y un tubo tan pequeño?
@fullthrottleES
Жыл бұрын
I know, i changed the cylinder to a 74 top negro and put a blaze 80
@sergiomartinperez7376
Жыл бұрын
En recta mucho gas a la latilla en curva frenas mucho, si manejas una 600 o más.... Que haces?!?!?
@Adrises
Ай бұрын
Epaa tranquilo mister JAAJA
@sergiomartinperez7376
28 күн бұрын
@@Adrises yo relajado fenómeno!!! ;)
@ServeraServera0
Жыл бұрын
Espera, eres de españa?
@fullthrottleES
Жыл бұрын
si
@danielhristov6175
Жыл бұрын
How can you even breathe at that speed!!!!!!!!!!
@user-tc3tb5tq8u
Жыл бұрын
km/h
@TCB_sumo
Жыл бұрын
is blaze a good exhaust brand?
@ServeraServera0
Жыл бұрын
It is, there is a reason why you see them on the street every so often
@TCB_sumo
Жыл бұрын
@@ServeraServera0 in the country i life i havent seen one of them lol
@ServeraServera0
Жыл бұрын
@@TCB_sumo In spain there are a lot of bikes with blazes, because you know, they are made in there
@miproducts
Жыл бұрын
That was about 85 km/h lol. Use GPS
@sunfi0vv3r40
Жыл бұрын
Mine shows 6-8 km/h less than gps, definitely every koso speedo like this does the same, 108km/h was around 100-101
@fullthrottleES
Жыл бұрын
gps was exactly the same.
@sunfi0vv3r40
Жыл бұрын
@@fullthrottleES no way, these koso speedometers are lying for around 8km/h on this speed
@miltonulm5102
Жыл бұрын
@@sunfi0vv3r40you can adjust them
@sanddu
15 күн бұрын
@@miltonulm5102 how
@axuuz
Жыл бұрын
Bro your meter is shit, its showed 98 kmh while it was 80kmh road and you did not catch up the car infront of you
@imdovis787
Жыл бұрын
Bro if its a 80kmh road it doesnt mean the car is going 80 🤦♂️
@ludvigekelund6947
Жыл бұрын
You need gps…
@fullthrottleES
Жыл бұрын
Gps? What do you mean
@ludvigekelund6947
Жыл бұрын
@@fullthrottleES the original speedometer is usually very wrong after tuning
@xkhylx6492
Жыл бұрын
Too big carb
@fullthrottleES
Жыл бұрын
I have recently put an 80cc, ill do a vid soon
@abrilia5591
Жыл бұрын
Have u ported the sylinder?
@fullthrottleES
Жыл бұрын
Nope
@edob06
Жыл бұрын
It looks on camera so slow😮
@TeeOna2Stroke
Жыл бұрын
i dont knowwww. take a number, and ill get back with ya.
@jusuperkele
Жыл бұрын
and the real speed on gps? :D
@fullthrottleES
Жыл бұрын
I dont know how to test that
@serveri69
Жыл бұрын
@@fullthrottleES What do you mean you dont know how to test that? With gps ofc :D Your speedometer is showing nonsense speed
@fotomicke4725
Жыл бұрын
@@fullthrottleES You need to use a app on your phone like Speedometer or sum like that.
@hugoparox
4 ай бұрын
@@serveri69 nah, he was catching up to a car on an 80 road showing 85 on speedo and still getting closer slowly. So probably very accurate.
@klsojenzljbenodbd
Жыл бұрын
Blaze racing 50?
@fullthrottleES
Жыл бұрын
yes blaze 50-70 exhausst
@ServeraServera0
Жыл бұрын
I thought these Euro 5 bikes were already terrible stock, but I am sure impressed
@aleksanteri1234
Жыл бұрын
They are i have one its so terrible, i need a bigger nozzle and to remove the restictor plate.
@skizz2272
Жыл бұрын
do you use the original crankshaft, or did u buy a tuning one?
@fullthrottleES
Жыл бұрын
i changed the crankshaft to a reinforced one however for a sport 70cc cylinder, you would be fine with the original along as your original crankshaft has less than 6000km.
@undergrounddrift187
Жыл бұрын
is there a huge difference between this motoforce 70cc and stock 50cc bro ?
@fullthrottleES
Жыл бұрын
yes theres definitely a noticable difference, my friends cannot ever keep up and i am the same speed as the 125 4 strokes like a yamaha m125. however im putting an 80cc soon. look at my other video and it shows the difference.
@romanmussmann5910
Жыл бұрын
you could hit 120 without the bag and jacket
@jussi798
Жыл бұрын
Or without balls
@eriklook2189
Жыл бұрын
Kinnng! Good quality
@frb.moritzm
Жыл бұрын
what did you change about it?
@dylandetaeye
Жыл бұрын
he changed the cdi that goes to 13.000 rpm, a bigger 21mm carburator from Delorto and a blaze 50-70 exhaust. please read description before u ask something.
@fullthrottleES
Жыл бұрын
@@dylandetaeyethankyou
@AnisBeen-wo7ez
3 ай бұрын
@@dylandetaeye how much cost all this modification
@dylandetaeye
3 ай бұрын
@@AnisBeen-wo7ez I am not the owner of this bike, but I think probably around 500€
@AnisBeen-wo7ez
3 ай бұрын
@@dylandetaeye ah ok it's nice thanks
@maxebhd643
Жыл бұрын
Was it easy to tune the carb with the racing ecu and which racing ecu did you get ? I have problems to get a good sparkplug colour with the derestricted stock ecu. Your Bike sounds really good!
@fullthrottleES
Жыл бұрын
I just changed the carb to a 21mm from a 16 at the mechanic. I dont think they changed the main jet or tuned it any further. I just bought a 13,000rpm cdi (ecu) not a racing one otherwise the engine blows up. It cost 130€. If you reply to this comment i will reply with the link to it. When i last changed my spark plug, it was very black.
@fullthrottleES
Жыл бұрын
@@Dekuuuuuuuueunfortunately the product isn’t sold anymore, however i an selling my ecu since I’m buying a racing ecu for a change of cylinder. My instagram in @finngoodyear_ Message me if your interested.
@dominykaszaksas1523
Жыл бұрын
setup or stock? gear size? exhaust?
@fullthrottleES
Жыл бұрын
Stock engine but aftermarket exhaust and aftermarket carburetor. gear ratio is 14x58. exhaust is blaze 50-70cc racing.
@millelidholm3302
Жыл бұрын
Did you manage to get it out properly or is it to complicated? I’m currently trying to figure out how I should remove the catalytic converter the best way possible on my MRT 2022
@fullthrottleES
Жыл бұрын
Nope, i gave up and changed the exhaust
@fullthrottleES
Жыл бұрын
You need to either hammer the catalytic converter out with a long flat head screw driver and a mallet or buy an after market derestricted exhaust. I have recently mounted an aftermarket exhaust (straight pipe) called “Jazen 50-70cc exhaust” the bike goes 90kmh with this setup.
Пікірлер