Shelly Plus 1 PM Or Shelly 1PM Gen3 Will Do this job Links to purchase From Shelly Web : bit.ly/4cax2pY From Aliexpress : s.click.aliexpress.com/e/_DlWe1kF From Amazon : amzn.to/3Xw5eYQ
@akhlaq87
Ай бұрын
Hey, thank you very much vor detail wiring pics and explanation. I've bought the Range 0-2m and Output 0-5V linked from your description and bought Shelly uni plus. Could connect to shelly via the app, but there is no voltage (all the time 0.0v). I've double checked but your wiring with mine but didn't found the difference. So white from sensor to white of shelly (ANALOG IN), red with red (VAC1), and black and green (VAC2/GND) with blue from sensor. Any idea what I'm doing wrong? Is there any wiring difference with shelly uni and shelly uni plus?
@wesmart1
Ай бұрын
You're welcome, my friend. Yes, your wiring is correct. Did you activate the sensor on the Shelly UNI Plus? You need to do that with the Plus model by adding a peripheral.
@Omobilo
Ай бұрын
Thanks for this. Seems your ali link also shows probe is a 2-wire one and not a 3-wire. Can you please confirm also from your end before I order? The 3rd (that looks like a wire) is not a wire but some hose for air vent if not mistaken? btw: what esp32 board would you buy today for this as an alternative to the shelly uni since i have esp integration setup on Homeassistant?
@wesmart1
Ай бұрын
You're welcome Buy from this link s.click.aliexpress.com/e/_DkgA4zv Choose any size suitable for you and then choose 0-5V Don't worry about the pictures just choose from 0-5, volts there will be three wires for sure Use the new version of Shelly Uni Shelly plus uni s.click.aliexpress.com/e/_oCF3Et4 Fully compatible with Home Assistant and many advantages
@Omobilo
Ай бұрын
@@wesmart1Thanks. Why not the 0-10v for a 2m depth or best 0-5v?
@wesmart1
Ай бұрын
@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.
@wesmart1
Ай бұрын
@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.
@kashxpert
2 ай бұрын
Thank you, I have the exact same setup nut forgot to ground the sensor green wire but it seems to work fine. Is there an issue with that? Should I fix it? I have value flaunting a bit but not significantly.
@wesmart1
2 ай бұрын
You're welcome, Yes, that's right, don't modify anything. This flaunting is considered normal, don't worry
@yadeocal8045
2 ай бұрын
Hello, I have a Shelly Plus1 and a roller door that opens with 12 volts. This door needs to be opened by supplying it with 12 volts of electricity. Now, something confusing me. If I input L N 12 volts, is it sufficient to use it to open the electric door or do I need an additional adapter for the door roller? And how should I wire it according to which diagram?
@wesmart1
Ай бұрын
Usually, the motor for the roller door operates at 220 volts, and the 12 volts come from the control board that manages the roller . The easiest way for you to set this up is to take power from the main operating source of the motor to run the Shelly Plus1, which uses a dry contact relay. Use the dry contact relay on the Shelly Plus1 to interface with the control circuit of the roller shutter. This way, the Shelly can control the shutter without directly handling the 12V control signals.
@Najathoney
2 ай бұрын
Niceeeee
@wesmart1
2 ай бұрын
👍
@dommyregs
2 ай бұрын
I have same sensor, on home assistant I see measurement in Volt. How replace unit volt in %?
@wesmart1
2 ай бұрын
You need to use template in yaml configuration To convert from volts to percentage
@dommyregs
2 ай бұрын
How to do?
@wesmart1
2 ай бұрын
That's it. name: "Roof Tank level" unit_of_measurement: "%" state: > {% set voltage = states('sensor.roof_tank_level_adc') | float %} {% set percentage = (voltage / 2) * 100 %} {{ percentage | round(0, default=0) }} You must change the sensor and voltage according to the name and volt of the device you have
@dommyregs
2 ай бұрын
@@wesmart1 i paste it but home assistant says an error, It cant't reboot because it see error in line
@user-sd1od7sm9x
3 ай бұрын
NAIL, You are always creative
@wesmart1
3 ай бұрын
Thank you my friend
@wesmart1
4 ай бұрын
Purchase Links: From Shelly : bit.ly/3wvba97 From Aliexpress : s.click.aliexpress.com/e/_DlySczR From Amazon : amzn.to/3IeGXO2
@jibrriel
4 ай бұрын
light switches is one thing. elevator hell no
@wesmart1
4 ай бұрын
The elevator buttons at the end are like light switches.
@bubble_cookie9000
4 ай бұрын
Does that device measure pressure?
@wesmart1
4 ай бұрын
Yes, it measures the pressure. Watch the full video kzitem.info/news/bejne/tWptmo15q2Rmamk
@juggalojay5981
4 ай бұрын
Until u get shock of a lifetime
@wesmart1
4 ай бұрын
Why the shock?
@wesmart1
4 ай бұрын
Purchase Link: Water level sensor s.click.aliexpress.com/e/_DeZ9rHr only choose 0-5V or 0-10V shelly uni : s.click.aliexpress.com/e/_DeO7ael
@abdelhaialkhaldi7072
4 ай бұрын
Which is the best 0-5v or 0-10v Is theis suitable for tank 2 meters And why you choose these only
@wesmart1
4 ай бұрын
The choice between 0-5V and 0-10V depends on your specific requirements. If you opt for a 5V sensor with a 2-meter tank and a 2-meter measuring range, you'll see 5 volts for a full tank. Conversely, with a 10V sensor and the same tank dimensions, you'd observe 10 volts for a full tank. The decision hinges on the voltage range you prefer to work with and how it aligns with your monitoring needs.
@abdelhaialkhaldi7072
4 ай бұрын
@@wesmart1 thank you
@wesmart1
4 ай бұрын
You're welcome
@wesmart1
4 ай бұрын
Purchase links From Amazon : amzn.to/3HVSX6L From Shelly : bit.ly/46ApQjp From Aliexpress s.click.aliexpress.com/e/_DCqs1B7 From Jordan: Wesmart4.com
@dudevinci
5 ай бұрын
me reacting to this pointless information 😑😑😑
@wesmart1
5 ай бұрын
This short video I am preparing the full video now everything will be explained
@wesmart1
5 ай бұрын
Buy Links Shelly Plus Uni From Shelly : bit.ly/49fqy85 From Aliexpress : s.click.aliexpress.com/e/_DdUio0d Water Flow s.click.aliexpress.com/e/_DdbgZK5 Digital Electronic Counter: s.click.aliexpress.com/e/_DkXocX3
@thedaveking
5 ай бұрын
Sure, I want to live in a world where random youtube viewers modify building elevator controls.
@wesmart1
5 ай бұрын
That's your belief, my friend. If there's one mistake, please point it out, and let's have a constructive conversation.
@thedaveking
5 ай бұрын
@@wesmart1 It's arguably always a mistake to modify the controls for an elevator you don't own, without permission from its owner, and to encourage others to do the same. I'd be interested to see a video where you show your work to your neighbors and the building management, and see how they like it.
@wesmart1
5 ай бұрын
I appreciate your perspective on the matter. In my situation, I own the apartment and serve as the authorized representative for the other building owners. Rest assured, I won't engage in any illegal activities.
@RestNPizza
5 ай бұрын
Now I want my own elevator
@wesmart1
5 ай бұрын
It's easy you can do it.
@wesmart1
5 ай бұрын
Buy Links -------- shelly 1 plus form shelly web : bit.ly/3UQr440 from aliexpress : s.click.aliexpress.com/e/_9QYunD from amazon Saudi Arabia : amzn.to/3BJGm4Q from amazon USA : amzn.to/3P5Z2Pj from amazon DE : amzn.to/3zFIUhX from amazon UK : amzn.to/3Qlkocz from Jordan : wesmart4.com/product/shelly-plus-1
@wesmart1
5 ай бұрын
Purchase Link : bit.ly/3O11nNC
@cenjoz
6 ай бұрын
@wesmart1 What display device do you use in the video?
@wesmart1
6 ай бұрын
Fire tablet and hubitat dashboard
@user-ud4rv5mo8d
9 ай бұрын
Purchased sensor and it says it needs 24v DC power - what will happen if I use 24V AC as I seem to have plenty of spare AC power adaptors ?
@wesmart1
8 ай бұрын
The device will not work correctly with 24VAC You can use 12vdc if 24vdc not available
@wesmart1
9 ай бұрын
Fluid level sensor purchase link s.click.aliexpress.com/e/_DkgA4zv from amazon USA : amzn.to/3pCg2Tb For High Temperature Liquid / Diesel / Dirty Water Sewage Level s.click.aliexpress.com/e/_DDguI4N --------------------------------------------------- shelly uni from shelly web : bit.ly/3C7i1WS from aliexpress : s.click.aliexpress.com/e/_Dn2NelD from Amazon UK : amzn.to/3AlwNYE from Amazon DE : amzn.to/3AnoVG0
@wesmart1
9 ай бұрын
Purchase links s.click.aliexpress.com/e/_DECfRYR
@WarlonWinterheart
Жыл бұрын
Did not like the robot voice, but otherwise a very good and informative video. Thanks!
@wesmart1
Жыл бұрын
My main channel WeSmart is in my original language which is Arabic here it is a subchannel the videos are in English Using text to speech
@maak6270
Жыл бұрын
You rock man, very well explained!
@wesmart1
Жыл бұрын
Thank you 👍
@pierrejaubert9189
Жыл бұрын
Hello, thanks for sharing. I have bought the shelly unit and sensor before watching your video... and my water level sensor has only 2 wires (red and black) instead of the 3 like yours. Any idea about the cabling? Thanks in advance for your support.
@wesmart1
Жыл бұрын
Hello You're welcome You need to buy a piece to convert current to voltage Like this s.click.aliexpress.com/e/_DlE2JyD
@daiashthomas
Жыл бұрын
Would this sensor work in Kerosene or bio-diesel.
@wesmart1
Жыл бұрын
There is another type dedicated for diesel You can connect in the same way in the video You should order 0-5 or 0-10 volt output This is a link s.click.aliexpress.com/e/_DnLNVX3
@ToTo-od9wz
Жыл бұрын
Hello, I have same configuration but unfortunately the readings are not stable. I have a range between 0,07V and 0,28V without moving the sensor. It is necessary a stabilized power source? You use one in this example? Thank you.
@wesmart1
Жыл бұрын
Welcome These changes are not significant if they are at a level higher than 1 volt And the reasons are mostly the passage of wires with other electrical wires
@directhouses838
Жыл бұрын
Hello, thanks for your very relaxed explaination. It's very easy to follow ..... but i have a little problem. I have the exact same combination. But when i connect the green wire to the ground .... nothing will work. When i disconnect it the shelly led goes up again .... Do you have any idea what i am doing wrong? Thank you so much. Kind regards, Frank, France
@wesmart1
Жыл бұрын
Hello Do the colors of the wires on the sensor the same colors as the video ??
Пікірлер