do you have to drill a hole in the plate or is there a plate with a hole I need to order?
@marksmotorcycle375
3 ай бұрын
The plate that came as standard with my bike has a little knock out section that you remove for the wires.
@DrMarvinLara
4 ай бұрын
Torque wrenches are not for removing lug bolts
@marksmotorcycle375
4 ай бұрын
Why comment if you are going to be negative, this is to help people that genuinely need help.
@beararse7309
11 күн бұрын
@@marksmotorcycle375 he's not being negative lol. Torque wrenches are not designed or meant to be used to take off lug bolts. He's educating you so dont be a bitch about it.
@gerketeitsma3431
5 ай бұрын
and then you let it run on how many rpm?
@gerketeitsma3431
5 ай бұрын
can you unscrew the clamp and then go driving with it?
@marksmotorcycle375
5 ай бұрын
What I did was drive it to warm it up, then parked up, loosened the clamp and let it tick over, I wouldn’t drive it with the clamp loose.
@paulwalsh4236
5 ай бұрын
What is that tool call for lug nut
@marksmotorcycle375
5 ай бұрын
Hi, it’s not plug and play, you have to connect to the bikes loom, you can use the blue connector where it clamps onto an existing wire, or you can cut and solder for a more permanent fix. Hope this helps.
@joeedge5618
6 ай бұрын
How do the wires in the kit fit to the bikes wiring do you need to cut anything or is it plug and play ?
@Armourpro22
6 ай бұрын
Didn't work for me sadly I've been driving around for 2weeks with no clamp 😢
@user-zc6ox1vq7n
7 ай бұрын
Hi great video did you reconnect the fuel pipe to the side of the injector when you ran the engine? Thanks
@multipreach2674
8 ай бұрын
Did you try a puller before hand?
@marksmotorcycle375
8 ай бұрын
No I didn’t, I don’t have any special tools, all I did was exactly as I said in the video. Thanks for watching.
@thelondoncraftsmanworkshop
8 ай бұрын
Thank you!
@dannybartlett4225
8 ай бұрын
i hate my van with a passion have a love hate relationship like lol
@ShyRage1
Жыл бұрын
If I have the key and take it off properly, does it matter what lug it goes back on?
@stewartaberdeen9370
Жыл бұрын
Appreciate
@stewartaberdeen9370
Жыл бұрын
Hi Mike did you remove jet line fuel return plus clamp and electric feed So everything to that injector
@stewartaberdeen9370
Жыл бұрын
Just to know what size socket spline to remove clamp please
@stewartaberdeen9370
Жыл бұрын
Hi i got the aa out and they found no 4 injector fault and did a test on it with multimeter to confirm im trying tomorrow my neighbour mechanic doesnt believe its possible i will show him im even more adamant now to do it What size torx spline tool for that clamp marc please got to get bus to auto shop for the tool
@marksmotorcycle375
Жыл бұрын
Good stuff, I hope all goes well for you.
@stewartaberdeen9370
Жыл бұрын
What size is the torx you used for the clamp
@jittawanphrakousonh2662
Жыл бұрын
I have 2015 gla 250 what size for socket?
@marksmotorcycle375
Жыл бұрын
No specific size, just one that will hammer on to the nut or stud.
@DavidAbadesDios
Жыл бұрын
active traduction
@myphone307
Жыл бұрын
What years is that Mercedes I have the same problem in my 2016 e350 they striped my lock bolt and can’t get it off
@marksmotorcycle375
Жыл бұрын
It was a 2005 car.
@myphone307
Жыл бұрын
How do u know it was a 21mm was the 20mm too small
@thpxs0554
Жыл бұрын
Brilliant. It would probably work on all these stuck injectors, just a matter of time. And leaving it running for hours is better than struggling for hours.
@timlewis8231
2 жыл бұрын
Absolutely brilliant! Was thinking along the same lines and was about to try this when I saw this video.
@marksmotorcycle375
2 жыл бұрын
Good luck hope it works out for you.
@themagpie_1
2 жыл бұрын
i have to change my injector seal on number 2 injector, so this will be a big help as its leaking diesel, so it has likely built up the crust like yours.
@marksmotorcycle375
2 жыл бұрын
Simple to reseal as long as you get the injector out. Good luck.
@vauny24
3 жыл бұрын
Hi just watched your intresting vid, you disconected the problem injector loosened the clamp then started the engine, does disconecting the wiring plug stop that injector spraying fuel into the cylinder? Problem i have is white smoke im trying to identify which injector is the culprit and i was wondering if i start the engine then disconect connector plug to an injector 1 at a time, would it tell me which injector is faulty ie white smoke stops, thats presuming theres only 1 faulty injector causing the white smoke, smels like un burnt diesel.
@booooo666
3 жыл бұрын
Gr8 video Did diagnostics tell you which one it was.. Which one is 4 and which one is one?
@marksmotorcycle375
3 жыл бұрын
Yeah diagnostic did give a number for the one with the fault, then the auto spark pointed it out in the engine after the diagnostic test, so I could remove it myself.
@booooo666
3 жыл бұрын
@@marksmotorcycle375 thanks.. Is no1 on the left?
@booooo666
3 жыл бұрын
@@marksmotorcycle375 new maf sensor and no3 injector needed.. Getting done today.. Hope it comes out in one piece.
@booooo666
3 жыл бұрын
Update... New maf sensor and wire to n03 injector fixed.. Running sweet. 😁😁
@davidaustick5183
3 жыл бұрын
Cheers boss I've just bought a Renault trafic same engine and although it's running fine sort of lol I've noticed around injector number 3 same one on the video and there's like a hard tar substance around it so I assume it's leaking do you know if they are a straight swap or coded
@marksmotorcycle375
3 жыл бұрын
It sounds like it’s leaking, that black tar like substance is hardened diesel, I got a lend of an injector setting tool, re ground it and put a new copper washer in, that sealed it and stopped the leak, TBH, I don’t know if they are coded.
@stewartaberdeen9370
Жыл бұрын
I read they don't need coding on the 1.9
@anthonyhowes4030
3 жыл бұрын
Hi Mark, I have a 2002 trafic dci. Has random starting faults. Then driving, randomly cuts out and won't start. Low fuel pressure. Around 50 to 60 bar. Does this sound the same fault as yours?
@marksmotorcycle375
3 жыл бұрын
No sorry, your problem is different to mine, low fuel pressure could be your pump, though I’m not a mechanic. Hope you get it sorted though.
@anthonyhowes4030
3 жыл бұрын
@@marksmotorcycle375 that's the problem not sure if it's the pump or injectors. Could end up costing loads and not sure if it will be fixed. Thanks for replying bud.
@richards1037
3 жыл бұрын
This short video gave me a big help Mark. I couldn't remove any of all 4 injectors when engine cold. I'll do it as you saying. Loosen the clamp and leave it there in case it won't fly out😉 Hopefully i get it out. Cheers pal👍👍👍
@marksmotorcycle375
3 жыл бұрын
Good luck, I hope you it get sorted!
@richards1037
3 жыл бұрын
Yeah. Its out. Thanks again. Its really worth!!! Spot on mate👍👍👍
@roman6149
3 жыл бұрын
Nice)
@Kai99342
3 жыл бұрын
So can you drive without the wheel lock because no one is showing how to put it back in without the key?
@meatyklaws8774
3 жыл бұрын
Duh
@marksmotorcycle375
Жыл бұрын
Don’t be an idiot, you will need a new set of nuts and key.
@PeterFinch
3 жыл бұрын
Any Ideas on cleaning the gunk left in the injector hole?
@PeterFinch
3 жыл бұрын
Fantastic. Thanks Marks Motors. I guess this explains why glow plugs need a bit of heat when removing - to soften gunk?
@TheGamingAnimator
3 жыл бұрын
Why not break bar
@howtolife5705
4 жыл бұрын
Anyone had any luck with this method on injectors that are rusted in solid due to water ingress?
@MechanicCompetence
4 жыл бұрын
Hello! Thank you very much for this video, just did this on my Renault Trafic to get injector 4 out and it worked perfectly!! Took a few minutes of warming up and some revs and suddenly it POPPED right out of there! I would like to warn others though that in doing this I bent the metal fuel line from the rail to the injector. It worked fine but I did have to push and pull it and bend it around to get it back in there!
@marksmotorcycle375
4 жыл бұрын
Luke Nope that’s exactly what happened to my fuel rail pipe, that’s why I suggested leaving the injector clamp loosely fitted. Really glad to be able to help you out👍🏻😁
@MrCW1979
4 жыл бұрын
I'm looking at buying the traffic sl27 dci 2.5 , I hope I don't need to use this amazing advice, but if I do I thank you in advance... brilliant mate 👍🏻
@marksmotorcycle375
4 жыл бұрын
Chris whitlow thank you, and i hope you don’t need to do this on yours. Good luck with it!
@McCoyConfection
4 жыл бұрын
Oh my goodness! That is absolutely genius!
@marksmotorcycle375
4 жыл бұрын
Shane Jansen van Vuuren thank you
@chiccoka
4 жыл бұрын
Good video thx. I have the same engine and the car pulsating during acceleration .Did you had any of this symptom before it get worse?
@marksmotorcycle375
4 жыл бұрын
chiccoka thanks for the comment, not that I can remember, though “pulsating “ could be the engine getting starved of fuel, just a guess though.👍🏻
@chiccoka
4 жыл бұрын
@@marksmotorcycle375 thx m8. I think i need to do a bottle test
@Rich.Wilkin
4 жыл бұрын
Great advice thanks for sharing
@stephenvedmore1385
4 жыл бұрын
Thanks for this. How did you establish which injector was causing the problem?
@marksmotorcycle375
4 жыл бұрын
Stephen Vedmore Hi, a mechanic ran a diagnostic test using a snap on device, and that one showed up as the fault.
@paulgough3402
4 жыл бұрын
Top advice. Just did it on my trafic 2003 van 30mins later popped out 👍
@marksmotorcycle375
4 жыл бұрын
Paul Gough great stuff, glad to help👍🏻
@user-fn8kr5bq4k
4 жыл бұрын
Thanks for your time appreciate 👌👍🌹
@rct2
4 жыл бұрын
I take it you leave the fuel rail connected to that injector whilst doing this just remove the electrics? Stupid question i know but my m8s van is has same prob in injector one and he has been quoted silly money to replace it. Many thanks for the video.
@marksmotorcycle375
4 жыл бұрын
rct2 yeah, but just loosen the injector clamp don’t remove it altogether, there is a chance the injector would fly out and hit the bonnet otherwise.
@michellerob880
4 жыл бұрын
Awwww I hope she’s still around 😊🐾🐾❤️
@marksmotorcycle375
4 жыл бұрын
michelle rob , thanks for your comment, sadly she is not, she got cancer in one of her rear paws, got a toe removed but it spread up her leg, the vet put her to sleep, that was a hard day.
@michellerob880
4 жыл бұрын
Marks Harley..... Sorry to hear that, love our furbabies 😔❤️
@marksmotorcycle375
4 жыл бұрын
michelle rob we got another cat from cats protection, took a while to come round to the idea again though, she was a bit wiffy when we got her so we called her Phoebe, after Phoebe from friends and her song smelly cat!
@walterrodriguez4516
4 жыл бұрын
I bought the same one a while ago. I'm still building it.
@marksmotorcycle375
4 жыл бұрын
They are a great kit, a lot of thought and design has gone into producing it, get stuck in and get it finished.
@lukechappell8728
5 жыл бұрын
Fucking hell get in with it we don’t wanna know the life story shit video. No showing how to prime after or anything
@yourloveismydrug6537
5 жыл бұрын
A lot safer if you undo the clamp so it is loose but the bolt is still in a few turns . that way it can come loose but not fly out
@themagpie_1
2 жыл бұрын
and bend the high pressure line
@jordydereus
5 жыл бұрын
Thanks mate! Today i did the same an a 2.5 . Worked perfect!
@marksmotorcycle375
5 жыл бұрын
Jordy de reus great, glad my video helped you out, 👍🏻
@Kurdos20000
6 жыл бұрын
Jeeeez, mate! thanks for that amazing video and thanks for sharing it. very helpful.
Пікірлер