Great video about the process of changing PS2 fans... shame the new fan is pretty much just as loud =/
@rivetdomme
3 ай бұрын
Thanks for this. My fan was really gummed up so I had to pull it out of its housing to clean it up.
@Rajzer30401
8 ай бұрын
But despite everything, the console works more quietly, right?
@mastibruch5667
8 ай бұрын
Can i use the fan of an 50004 instead for 39004?
@racerboyo
6 ай бұрын
Yes but it doesn’t fit perfectly. Just don’t put in the middle case screw on the back near the fan or you’ll snap the screw peg. I found out the hard way but yes the 50 series fan works in a 39001. The Noctua fan kits on Amazon work the best but the 3D printed fan bracket doesn’t look that great but it’s the back of the console so can’t complain too much.
@jamiesilvestro3382
9 ай бұрын
You're shit!
@Rick-el3ox
Жыл бұрын
The end made me laugh 😂
@JorshPodGaming
Жыл бұрын
awesome!
@christopherperry4494
Жыл бұрын
Good video I found, but save up for a go pro camera, dudes like a bull in a China cabinet
@ExiledJason
Жыл бұрын
Very handy tutorial, no bullshit just straight to the point
@khiladi
Жыл бұрын
Great tutorial, thanks!
@Stealfos
Жыл бұрын
How do i know wether the fan is broken or it is an iternal problem?
@prototype1808
Жыл бұрын
Don’t use fucking tweezers. Just pull it by the cord. The tweezers ripped off my connector. So fucking irritated
@koriyagay
2 жыл бұрын
Do you know if the Scph3000 is the same to repair?
@DarkNeon27
2 жыл бұрын
You can also use the quieter fan from a 5xxxx series PS2
@Zontar82
2 жыл бұрын
cannot find a fan with a connector like that anywhere, any help?
@zandem3701
2 жыл бұрын
search for 2 pin
@newkfromrotterdam
2 жыл бұрын
lol, that ending 😆
@MassimoAntonioCarofano
2 жыл бұрын
Hi, anybody mention a Brand-Model name to replace it? As in description, the FAN replacement for PS2 Fat must be 60x60x15mm, 7V powered with a 2Pin connector..
@mattzee6287
2 жыл бұрын
Was that a 3 pin?
@DannyWilliamH
2 жыл бұрын
Do *NOT* pull that PSU board out or put it back in with your bare hands! Doing so will give you a massive shock if your skin bridged the legs of that giant capacitor. If you have heart issues it can be lethal, if not it can still really hurt you.
@nogueirv
2 жыл бұрын
Looks like someone had a bad experience xD, Seems like we found this out the hard way.In my case, my heart was a little messed up, so it went back to work just fine.LOL
@DannyWilliamH
2 жыл бұрын
@@nogueirv Haha, no, I'm in the repair business and an electrical engineer. I've avoided an incident by knowing what a power supply can do to a person lol. The PS2 has a single MASSIVE cap along with a few smaller ones. The little guys would just poke you a bit but that large cap can be lethal at worst and a bad experience at best. I posted that as a warning that I hope people see and heed.
@nogueirv
2 жыл бұрын
@@DannyWilliamH Your warning came late for me then. 😂👍
@harmonicposting
2 жыл бұрын
basically you're saying like dont touch it unless you have to? but then if you have to, what should you do? im new to this kind of stuff sorry for my ignorance lol
@obidahasdia4095
11 күн бұрын
Gloves @@harmonicposting
@onuryldz4592
2 жыл бұрын
Hey, you said it's still loud. But was it the same? Like it reduced to bearable loud from vacuum cleaner? Noctua fans are kinda expensive and I'm looking for cheaper alternatives
@esh92
2 жыл бұрын
Hey, i would say the new fan is about 30-40% less noisy than the old one. The one noctua fan i found would not fit because it was too thick... of you do find one, let me know. scroll through the comments, someone mentioned something about using an original sony fan from a newer model that should be good
@onuryldz4592
2 жыл бұрын
@@esh92 Actually that must be my question 😂 I checked all comments I know SCPH-5XXXX models fans is quiter but I can't find them on the internet
@johndee759
3 жыл бұрын
How do you get the right connector?
@johndee759
3 жыл бұрын
Can you put in a noctua?
@ArikIkirA
3 жыл бұрын
there is a company (TPO) that made it if you are in the US you can buy it on amazon but it is not cheap (35usd). It comes with the holder because the original socket on the console is too narrow for the noctua. It takes 12v which is 5 more than the original which means that in the long run might give problems with the electric distribution on the MB. On the SCPH30000 models might be a solution in terms of noise but not in terms of aesthetics since it protrudes about a cm. Also, if you have a 50000 there are virtually no upgrades because on those models the fan is much quieter (and again this is because the console socket for the fan output is at 7v so it is probably not having the fan spinning at the right speed).
@onuryldz4592
2 жыл бұрын
@@ArikIkirA But can you put SCPH-5XXXX fan into SCPH-39001 ?
@tyisafk
2 жыл бұрын
@@ArikIkirA I just installed that exact mod today. As a 30000 model console owner, it's worth it. The fan spins and pushes air out. Like you said, we'll have to see about long term, but I don't use my PS2 frequently, but that also means the fan is VERY noticeable when I do use it. It sounds like a jet taking off lol. It's actually so quiet that now I can hear the IDE HDD spinning up instead, so I guess it's time to move to SATA and get a smaller SSD to rid that noise.
@ArikIkirA
2 жыл бұрын
@@tyisafk nice update. If you upgrade to SATA (with original modded BB unit or compatible "lan port") consider trying a 2.5 instead of 3.5 for the simple reason they take much less juice, and so the console's PSU is not going to full blast pushing the fan to spin even faster registering the HDD consumption. Anyway also 3.5 SATA should not be as high in electric consumption as an IDE. I know about the noise, I had to leave my 30000 because I could not stand it anymore... 50000 is just another level but are not that easy to get :( keep me posted in case you need anything and happy gaming!
@ArikIkirA
2 жыл бұрын
@@onuryldz4592 Short answer: you can but I cannot say it would be much better. Long answer: I have done it on several consoles with no problems (all NTSC-J... I mention because here the power is 100V, 20 less of NTSC - the model you mention - and it is half of PAL region). The power distribution line would benefit from a 1.5ohm resistor just before the line of the fan. Huge hassle for very little difference. (Also, the PSU in 39000 is a tank and can resist much worse). Anyhow, 39000 are by far quieter than 30000 so it may be not worth the price of 50000 to harvest the fan. I say "harvest" because if you buy a fan like this one in the video the supplier will probably advertise them for 30k and 50k. The main difference in noise is given by the RPM that is regulated by the MB, not in the fan itself. A noctua is your only way to stay on the 39000 (that according to many is the very best); I personally have a 50000 in my setting, after I have been across all models and I can tell you that imo 50ks are the best providing a good balance of pros and cons along with great usability and accessibility... but that it is a matter of personal choices for a long time I did not want to get rid of my 30000 (that is when I experimented with 50k fans lol).
@tyreecampbell7365
3 жыл бұрын
Got my ps2 working after this video
@armaan2310
3 жыл бұрын
Can 24v fan of same dimension will work???
@armaan2310
3 жыл бұрын
I'm not getting any of the fans in india But after a long search I got two online. If the dimensions are 60x60x15mm it's available in 24V version . And for 12V I'm getting dimensions 60x60x10 Can I use 24v 60x60x15mm or 12V 60x60x10mm ?
@ArikIkirA
3 жыл бұрын
the ps2 power distribution for the fan should be 7v so I think it might not have enough juice to work properly! I hope you managed to get the right one! take care
@xn0gaming
3 жыл бұрын
Must be hard doing this all with one hand, while holding the camera with the other. :D
@esh92
3 жыл бұрын
Yep :D
@CreativeStorms
3 жыл бұрын
no intro, no talking, just showing and teaching, best tutorial ever
@esh92
3 жыл бұрын
Thank you! Intros and excessive yapping are two things i really hate.
@DeltaGamingOfficialYt
2 жыл бұрын
@@esh92 god bless you
@Andre-Cardozo-
3 жыл бұрын
_After a whole day this was the best video I watched on youtube today - Thanks so much for sharing_
@esh92
3 жыл бұрын
Thanks for the kind words, glad it helped!
@_Platinum-
3 жыл бұрын
Thanks for the video. We can still hear the fan but did you notice a difference with the older one ?
@esh92
3 жыл бұрын
yeah, the older one was louder!
@xls4750
3 жыл бұрын
Hmm 🤔 does the ps2 even need a fan I gonna do a experiment I will remove the fan and see if it over heats or lags or glitches or freezes
@excitingstuff5615
3 жыл бұрын
Experiment 😂😂😂 I’d be sad if I accidentally burnt out my ps2 but that’s bc I got it for my 5th bday
@theshaboodle8713
3 жыл бұрын
ordered a ps2 a long time ago that for some reason didn't come with one. DEFINITELY needs it
@barnabas5688
3 жыл бұрын
The fan is there for a reason!!
@Marlevlyn
3 жыл бұрын
You man handle that ps2 lol. Is the fan made by Sony or a aftermarket?
@esh92
3 жыл бұрын
aftermarket!
@EAGLS021
2 жыл бұрын
@@esh92 I tried a fan that looks exactly like your new one but it does not work. What do you think?
@PBA3000
3 жыл бұрын
Why is it still loud?
@esh92
3 жыл бұрын
the fan i got wasn't good quality. get a good one from a source you trust
@PBA3000
3 жыл бұрын
@@esh92 The problem is they are all from china & i have to wait 1 month for it to arrive.
@PBA3000
3 жыл бұрын
I ordered the same one yesterday
@PBA3000
3 жыл бұрын
I've seen one from noctua but they are too big and brown. Some people installed it but it looks ugly because it comes out of the ps2 case 🤦♂️
@ArikIkirA
3 жыл бұрын
@@PBA3000 true, and not only that: the noctua takes 5v more that can give the MB problems in the long run. Also the SCPH50000 models do not need this mod (since there the noctua will just spin for 7v which makes the fan much noisier thus almost indistinguishable from the original)
@thomascharnock
3 жыл бұрын
Thanks for this, helped me swap out a noisy fan with minimal effort.
@esh92
3 жыл бұрын
Happy it helped!
@1977Bonifácio-man
3 жыл бұрын
Good video mate
@Rotoid
3 жыл бұрын
Thank you for this video! What is your ps2 model and what’s the brand of the new fan?
@esh92
3 жыл бұрын
Happy it helped, bud! It's a SCPH-39004, the PAL version. For the fan: i searched for "PS2 Fan" in ebay and a bunch of them came up. Of course you can cut the connector off the old fan and solder it to any 60x60x15 mm fan you can find. The original PS2 fans run on 7 volts. idk if a normal 12v PC fan would work... if i ever try that i'll be sure to make a video. Here's mine: www.ebay.de/itm/Leiser-DC7V-L%C3%BCfter-Interner-Ersatzl%C3%BCfter-7-6-1-5-cm-f%C3%BCr-Sony-PS2-PlayStation/174377146581?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@getlaidgatorade8165
3 жыл бұрын
My man tried doing a speedrun
@esh92
3 жыл бұрын
the Video is sped up where no details are necessary (screwing stuff in/out) But yeah, it could all be done under 15 minutes :D
@anthonyaviles8665
3 жыл бұрын
here is the link for the fan www.amazon.com/gp/product/B07RLM53S5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Пікірлер