I really enjoy your straightforward, calm clear style Tyler. Thank you for the info. Yours is the only instructional video I have found about affixing wood to aluminum studded trailer walls. Thank you. Please release more content when you have time 😊.
@alliecat.3
Күн бұрын
Thanks for looking out. I just became aware I have a leak. YAY!
@jasonhand4471
3 күн бұрын
From a structural standpoint, it looks like you used a lot of unnecessary lumber there. You could have used the indents already molded into the Tacoma bed for the cross slats and then ran a single stringer (like a 2x8) down the middle for support. Would save a lot of weight! I then use those long plastic bins on each side of the stringer for drawers. Nice build though, these always end up being completely custom and unique to the user!!
@nyreeavi1863
2 ай бұрын
Did you try self tapping sheet metal screws?
@livingabestlife8
3 ай бұрын
How do you cut the panel to fit odd places. Is there a technique?
@TheKavebear1
6 ай бұрын
Very helpful. Thanks!!
@martydelgado3672
6 ай бұрын
I like your approach to make it. Keep it simple. Thanks for sharing your ideas.
@erikaalire9832
6 ай бұрын
Very helpful indeed! Thank you for your video
@KlouseInTheKloudz
6 ай бұрын
Was, in fact, very helpful
@kennethhudson8013
8 ай бұрын
You could get the fatigue matt pieces that interlock and glue them to the plywood with contact cement spray from harbor freight
@mikeprater6898
9 ай бұрын
How long are those vertical 2x4s
@Mike_Blanda
9 ай бұрын
Sweet! Simple and useful
@geneirvine9710
9 ай бұрын
Thanks for the video. I haven’t read all the comments, forgive me if someone already asked but I was wondering why you chose not to hang the right side support over the wheel well? Good job and making it removable!
@alanday5255
9 ай бұрын
I too am wanting to do this. I was sad you did not address the paneling gaps for frame movement.
@saragonzales3981
11 ай бұрын
im starting soon thank you this helped alot
@mfstr
Жыл бұрын
why did't you utilize the entire width of the bed?
@jamesrowland1508
Жыл бұрын
Is the idea for doing this just better insulation or what?
@GoogleDoesEvil
5 күн бұрын
Fixing water damage
@saraandrew9912
Жыл бұрын
Just built one of these for my Chevy Colorado this weekend, and its great! I went with a narrower 30-inch width, and its very stable and sturdy.
@tylerwilliams310
Жыл бұрын
Nice! Glad to hear it. I ended up making another version that was about that wide; great for solo trips. Have fun using it!
@madammim694
Жыл бұрын
looking good, thanks for the tip!
@danielmayorga4812
Жыл бұрын
NIce, nothing fancy, quick and very practical. Can't wait to do my own. Thank You .
@ChizzleVision
Жыл бұрын
One, you give next to no useful description.... and who the hell are the kids you mount under your bed????
@hirinijoseph
Жыл бұрын
Thanks really simple easy setup
@user-ux8go5lc3l
Жыл бұрын
Hey Tyler- great build! Curious if you have a materials list?
@RehabbedFurnitureLab
Жыл бұрын
Solid tip! Thanks! 💪🏼
@edmundbrown8715
Жыл бұрын
thanks brotha much appreciated
@amentothatt
Жыл бұрын
where and how can I customize these wood structure
@jessiefoley4402
Жыл бұрын
Thank you, this is what I’m doing now also
@deenakeys6646
Жыл бұрын
Thank you. Paneling my 5th wheel and was looking for what to do when paneling around windows.
@jeffreycorey4144
Жыл бұрын
Nice video. With the plywood that thick do you need the cross slats? Just drill holes in the plywood to keep the supports in place.
@mikey27437
Жыл бұрын
Seams like a good idea, but How does it hold together after you drive your truck over a bumpy road, Do you have to redo Jack, Leo and Geo again? Or it was never meant to be driven off road?
@LL-ue3ek
Жыл бұрын
You could probably used thinner wood to reduce overall weight. Especially when you have a support run in the middle.
@kylejutras4841
Жыл бұрын
What did you do for the trim?
@dawnbuteau6140
Жыл бұрын
Tysm!
@heck3104
Жыл бұрын
Sweet thank you. Going to be my project tomorrow hopefully it’s done in two days
@mylifemymusic21
Жыл бұрын
Thank you for sharing! we are remodeling our 5th wheel and need to attach paneling to the aluminum roof so we will have a ceiling 😅😅
@gregl2249
Жыл бұрын
Did you make a video of finished bed?
@riodward
2 жыл бұрын
Tyler, thank you. I am taking this on right now. Much appreciated.
@scornthwaite
2 жыл бұрын
This is the type of setup I'm looking for. I need to be able to use my entire bed on the daily, but want something easy to store and easy to put in/take out when headed out. Awesome base to work with! 👍
@joeyyknapp
2 жыл бұрын
Thank you for the inspiration. Managed to make a very similar design with your help.
@christiankulmann3325
2 жыл бұрын
Mini Solar Tip, You can steplessly dim down a bulge and all other hungry electricity consumers with a 5000W dimmer (7, EUR). I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos about it on my channel kzitem.info/news/bejne/xnlo1aCYfHSZm2U The inverter stays cool, quiet and the MOSFETs remain intact because extreme current peaks no longer arrive at the inverter. Now every Mini PV Inverter is enough to sell large devices...
@reginaldsanders8488
2 жыл бұрын
Great! Can you buy that in a kit?
@scotcompston
2 жыл бұрын
Not really helpful. Would like to see how the drawers are made
@t3angling575
2 жыл бұрын
Best idea I've seen yet. I needed a modular idea, fairly cheap and easy to build. Of course, from this main build one can tweak as needed for their purposes and desires. Spot on. Thank you so much for sharing, this has just saved serious $$$$$ in tents, awnings, etc. Excited to get this built for my truck this weekend. I know this is a 2020 build, and it is 2022, but still the best idea I've seen in 2 years of trying various tents, awnings, etc., and having to sell them. Storage looks to be easy as well, get some plastic tubs, notch them together with a piece of rope and slide them in and out. Perfect.
@tylerwilliams310
2 жыл бұрын
That makes me so happy to hear man! Exactly why I made the video. Best of luck with your build and adventures. thanks again!
@jamesbutler1862
2 жыл бұрын
Where do you get wood studs this small
@DrKushLove
2 жыл бұрын
Cut them your self measure and fabricate from a smaller 2x4 is what I did
@sandysees8924
Жыл бұрын
Maybe furring strips would work? I know Home Depot has them
@charlescote8391
2 жыл бұрын
Cool....good ideas
@rickdouglas2747
2 жыл бұрын
Build me up me I will pay you
@ferrjerr
2 жыл бұрын
Great idea! Thanks for sharing. Inspirational for sure
@fire58372001
2 жыл бұрын
Hi there, I saw your vid. I've been truck camping since the mid 80's. Here's what I've learned & I'll pass them on to you. 1) Get stuff you need at a camping store for backpacking. It's small, compact, & light weight. 2)Get splash guards for your truck. It'll help keep you & your rig clean. They work. I know. 3) When parking for the night, park headlong into the wind. That way if a storm comes you won't have to worry about a side wind ripping off your camper shell. Plus, if anything comes bouncing towards the truck, since you have a slimmer profile, it might miss you. If it does hit, the front of the truck is reinforced. 4) Use bug spray on the interior doors & windows/ screens openings to help keep bugs out. Use wasp & hornet spray around & on your tires to help keep critters out. Basically, all points of contact on the ground. 5) An inch is a lot of room. Learn how to stack & get used to sand & dirt. Use floor mats to put your shoes on too 6)Air out your sleeping area every morning or often. In an enclosed space the air gets stale & it will smell like feet & assholes. I know this from being in an 80 man berthing when I was in THE NAVY! 7)Use a small fan to circulate the air in your sleeping area. This will help prevent hot & cold spots from forming & help prevent condensation & mold & mildew from forming. I hope this helps. Great vid, thanks for sharing. Drive safe. 🤠
@heck3104
Жыл бұрын
Awesome good too know
@carypeaden4147
2 жыл бұрын
Why did you not use the last 8 inches (wheel well width) on the right side of the truck bed for the bed? I would like to build a system like this that I could configure in two different ways. One configuration would be for single person sleeping when I go hunting alone, the left half of truck bed would be used for my bed and the right side of the truck bed would be left empty so I could store my ice chest, game cart, bow case, and other hunting gear. The other configuration would be for a two person bed and it would take up most or all of the truck bed. I would use that when my wife and I go truck camping on vacations. Any suggestions on how to do the two different configurations?
@tylerwilliams310
2 жыл бұрын
I just like having some empty space on the sides to stash things while I'm in the bed. I actually did exactly what you're describing. All I had to do was cut different sized slats and different sized plywood tops. I took out the middle brace and slid the right one over to the center to fit. Voila, single bed for solo adventures and more storage space.
@stephenasbridge878
2 жыл бұрын
Simple but smart! I think even I could make one…so I’ll give it a try. Thanks for sharing your idea.👍
Пікірлер