Hi Goma, are you using the case in the 4-slot configuration?
@leagneu
Ай бұрын
Those fucking feet oh no
@Rixicc
2 ай бұрын
bro show more innards of the build...
@nwylynko
4 ай бұрын
Crazy how the Mac just categorically beat the dell
@EONTHEBEAT
4 ай бұрын
Windows laptops these days aren't good on battery while they're in a sleep mode, my 11 years old Toshiba laptop barely drains battery in sleep mode. I think sleep mode needs to be worked on for the latest laptops. Great video man keep it up!
@Sahelanthr0pus00
4 ай бұрын
hey, to fix that you can change the settings in your laptop so that when the lid is closed it doesnt do that. to do it click the windows icon and type "lid" and click the first setting that comes up. then change the close lid setting to hibernate.
@cyscoe
4 ай бұрын
Hey man I like the video, I have a tip for you, I think you should add a key light at a 45 degree angle from you face to give better lighting to your body for the talking head shot. You can see what I mean on my channel with my lighting setup and how it would look for you. The review was great!
@Goma_Tech
4 ай бұрын
Yeah I was looking at the best lighting setups with the "lights" I do have haha. I appreciate the advice, I will take a look!
@phoenics2465
4 ай бұрын
I wish I could just buy this man the subscribers he deserves
@Goma_Tech
4 ай бұрын
Thanks man! Trying my best to learn and make good looking videos haha
@MrVioletfirefly
5 ай бұрын
I love it...getting a 3600 to save money on a am4 platform and then using a 4090! ever heard of bottleneck?
@Goma_Tech
4 ай бұрын
lol yeah, it's overkill but I was trying to push the cpu to it's very limit
@tsmith906
5 ай бұрын
Im quite happy with my 3700x. ESPECIALLY the wraith prism cooler it comes with!!!
@joaomachado4822
5 ай бұрын
3600 was a banger for its time. A solid purchase. Nice video, bro
@Goma_Tech
4 ай бұрын
Indeed it was, I appreciate it man!
@R1L1.
5 ай бұрын
nah man 5800x3D is the goated cpu of time. if you are talking budget then 12100F probably is much about budget cpus so this is the only one that comes to mind then probably 3600.
@Goma_Tech
4 ай бұрын
True! For performance gaming wise, it's S tier for sure
@runDATrun6
5 ай бұрын
Solid video bro! I have this CPU paired with an RTX 4060 and I think it works great
@rednath7734
5 ай бұрын
💀
@runDATrun6
5 ай бұрын
???
@neverE1
5 ай бұрын
The bottleneck really isn't bad tbh
@runDATrun6
5 ай бұрын
@@neverE1 runs just fine, get 160 frames on COD. I don’t really need or care for more
@RySabre
5 ай бұрын
Man The ryzen 5 3600 was the most popular cpu in 2022-2023, everywhere i went i heard about it. Also,i would recommend making a reviews on the Ryzen 7 5700x
@Goma_Tech
4 ай бұрын
If I can find it locally I would love to compare the two with modern titles!
@larsern2752
6 ай бұрын
Dude, your power supply is suffocating with that glass panel instead of the mesh one
@SaltyFeta
6 ай бұрын
Nice vid and feet lol
@paulovictor6358
7 ай бұрын
Jesus cpu at 100°C
@abdullahalnoman4307
7 ай бұрын
that feet made it so ugly and unpleasent to look at it
@Smeaglepewp
Жыл бұрын
Hook Em 🤘🏾
@xDKxAlucard742
Жыл бұрын
Kinda crazy your CPU is getting that high of temps, maybe set the pump speed higher in NZXT cam and fix the push/pull config on your fans? Or maybe even the tube orientation. I'm running a 12700k and Corsair iCUE H115i Elite and average around 50C when running games. I know the 13900k runs hot but thats high af for this set up. Love the feet though
@SocialSophia
Жыл бұрын
*Did you make the 3D printed feet? That's so creative as a play on words*
@Goma_Tech
Жыл бұрын
haha I wish, I got them off of esty!
@FrakkD
Жыл бұрын
So how did you find the case works with the msi 4090? i have the same card and really want to build in this case.
@Goma_Tech
Жыл бұрын
I put the gpu support pillar to the lowest they can and rotated them. I had to remove the top horizaotal support frame on the gpu side of the case to fit it in. Then the top pannel was able to close just barely. It will make the case feel less sturdy but works
@nahrizulashraf
Жыл бұрын
I just realized this model should've not fit in meshlicious due to it's extra length. Do you put extra force for the top panel to close? Or it does have some extra space to fit in?
@Goma_Tech
Жыл бұрын
I put the gpu support pillar to the lowest they can and rotated them. I had to remove the top horizaotal support frame on the gpu side of the case to fit it in. Then the top pannel was able to close just barely
@nahrizulashraf
Жыл бұрын
@@Goma_Tech and u did all these just using the same original pcie riser? Or do I need to use even longer ones? Thanks!
@ElfinHilon10
Жыл бұрын
Heya. I hope you're still responding to comments. Are you using the tempered glass panels on either side, or are you using mesh? Thanks! Love the build! Also, GO UT.
@Goma_Tech
Жыл бұрын
Thank you haha!! Glass on the cpu side and mesh on the gpu side.
@welcomehomelucy5153
Жыл бұрын
Wait a meshlicious can fit a 3 fan gpu? Can it fit an atx motherboard too? Thought this was only for the meshroom case
@Goma_Tech
Жыл бұрын
Yes it can! It only depends how thick and long the GPU you are trying to fit it in. Can't fit a atx motherboard in this case, the meshroom case can though
@welcomehomelucy5153
Жыл бұрын
@@Goma_Tech I just got the MSI GAMING X GeForce RTX 3060 Ti
@MRWhiskers6969
Жыл бұрын
I have the same gpu! Thank you for sharing your build, I didn't think my msi 4090 was going to fit the case.
@Sqwidwood
Жыл бұрын
And I was worried my aorus master 3070 it wasn’t gonna fit💀
@AndyU96
5 ай бұрын
You have the meshlicious too?
@insanejustice7922
Жыл бұрын
Bro you cpu temps are crazy 100c almost the entire video so let me told you something I have the 13700k in the meshlicious with a Aio 280mm kraken x63 a asus motherboard z690-i rog strix gaming and rtx 3090 rog strix and my CPU TEMPS ARE BELOW 69C AND MYND YOU MY ROOM IS SUPEER HOT 🔥 SO DEFINITELY CHECK YOUR AIO PUMP AND MAKE SURE YOU TOOK THE PLASTIC ON IT AND KEEPP CHECKING
@S3agrass
Жыл бұрын
and u have 280mm vs 240mm and that is why the temp is high for him
@Goma_Tech
Жыл бұрын
Thank you for the heads up, it was a bios setting I forgot to turn off.
@Cactuspractice12
Жыл бұрын
noise test would be helpful
@phondekarvidhesh
Жыл бұрын
Planning to build this H1 v2 but you are hitting 100 deg. Have you found a solution to decrease that temp? Nice build by the way.
@Goma_Tech
Жыл бұрын
If you have a asus mobo turn off Asus’s performance enhancement, that's how I solved it
@Geezimac
Жыл бұрын
Nice build. My Meshi was an AMD system w/ a 3090. I replaced my NZXT radiator fans w/ Phanteks T30s (pushing air OUT to the front as opposed to drawing cool air in)...I think you may find that helpful in cooling the CPU
@shahimpanjwani8547
Жыл бұрын
Thank you for making unique videos like this! You're killing it bro
@wololo10
Жыл бұрын
13900K here in the mesh, 85C at 253W, no problem
@Goma_Tech
Жыл бұрын
Yeah getting the same results now when I turn off Asus’s performance enhancement
@wololo10
Жыл бұрын
@@Goma_Tech Yeah no need for 300W
@alejandrosalazar6775
Жыл бұрын
Great video!! Informative
@rising4life1
Жыл бұрын
nice build bro
@Goma_Tech
Жыл бұрын
Thank you man!
@saeedalfalasi9246
Жыл бұрын
Which psu is that?
@Goma_Tech
Жыл бұрын
cooler master v750 sfx white
@saeedalfalasi9246
Жыл бұрын
@@Goma_Tech i have a mini itx build with an i9 13900k cpu and 3080ti and 2 ddr5 16gb rams in asus z790i mb with an 850w lianli sfx psu and my system keeps crashing in some games and cpu overheating what could the problem be ?
@xxisolo4100
Жыл бұрын
@@saeedalfalasi9246 what cpu cooler do you have?
@Goma_Tech
Жыл бұрын
Could be that you didn't mount the cooler to your cpu correctly or cooler might be too small since you didn't say which one you're using
@gergelykiss1142
Жыл бұрын
Mate tour cpu constantly hit 100c meaning its thermal throttling all the time. Are u sure you put properly your cpu cooler?
@Goma_Tech
Жыл бұрын
I appreciate you pointing that out! I accidentally left the asus performance enhancement bios setting on. Averaging 86c now 👍
@AnticipatedHedgehog
Жыл бұрын
Was your cpu hitting 100c? Even in a small form factor case that seems too hot for me. Is something not functioning properly?
@Goma_Tech
Жыл бұрын
Thanks for the heads up! Yeah there seems to be a issue with the cooler mount or the nzxt cam software bugged out. Many other's have mention that as well, I will look into it 👍
@wololo10
Жыл бұрын
my 13900K with 240mm AIO in the meshlicious hits 85C at 253W
@gamerwarzone9993
Жыл бұрын
very good keep lit up
@Goma_Tech
Жыл бұрын
Thank you bro! 💪
@MellowSkyy
Жыл бұрын
The 3d printed feet
@Sqwidwood
Жыл бұрын
Gives me some kind of strange feel
@tdogfpv
Жыл бұрын
I think they’re there for the plugs at the bottom
@akam9919
5 ай бұрын
The PC case has an onlyfans now.
@abelederon855
Жыл бұрын
Bravo!👏👍
@ni5ga
Жыл бұрын
What are the components
@Goma_Tech
Жыл бұрын
msi gaming x 4090, 13900k, 32gb ddr5 5600mhz, asus z660-i, cooler master sfx 750w
Пікірлер