Sorry to hear that, seems rather strange. Hope it gets sorted soon In your favour.
@AdamSNook.
57 минут бұрын
Me to not sure if even they know why
@SimonsSolarShed
40 минут бұрын
@AdamSNook. I mean it's clearly your own content. It almost seems like they don't want to pay out, you're in fact earning for them via you're traffic it sounds to me like they are stalling, not sure why though.
@simonspider
Сағат бұрын
Bunch of wallies
@CortinasAndClassics
Сағат бұрын
Blimey Adam that's crazy of them. What the hell!
@AdamSNook.
Сағат бұрын
i know its crazy i have not resued any content lol its all me and my car
@CortinasAndClassics
Сағат бұрын
@@AdamSNook. Have you got a tripod so you can film at different angles? It could be a bot doing this and bots arent clever.
@AdamSNook.
Сағат бұрын
i have spoken to youtube and they have stated i need to reappeal in december
@CortinasAndClassics
Сағат бұрын
@@AdamSNook. That's madness.
@AliMackMechanical
Сағат бұрын
Get the patreon link in the discription Lad. I got demontised. For 3 months myself I appealed it and was reinstated after 3 months. Keep it up don't let them grind you down 👍
@AdamSNook.
Сағат бұрын
thank you mate i really do hope the reinstate me 3 months is a long time to wait crazy
@AdamSNook.
Сағат бұрын
patreon.com/AdamsNook?...
@alanhiggins1093
Күн бұрын
Well done brilliant work 👍
@AdamSNook.
Күн бұрын
Thank you mate means a lot
@procta2343
2 күн бұрын
Looking great there buddy, yeah welding touch ups and grinding is a pain in the arse, I must have spent weeks on doing it on my rover metro, when me and my dad did the boot floor corners and replaced the inner arch. If people are getting a little sick of the floor work, then it might be worth doing a video on another panel repair, like the scuttle panel, you removed. When i was documenting the metro build years ago, i did stuff under the bonnet etc. Just so the lads got a change of scenery, plus it might bump the views up more.
@AdamSNook.
2 күн бұрын
yeah i do understand people dont want to keep seeing same sort of work over and over on the same part but the floor was a very big job if need be i will finish these bits of camera but might upset other people so carnt win lol but will try and film other stuff i nthe next videos
@procta2343
2 күн бұрын
@@AdamSNook. yeah you cannot win sadly, the bulkhead to me looked a bigger job, due to the fab work you did. In fact i think you did the floor repairs quicker.
@AdamSNook.
2 күн бұрын
@@procta2343 yeah i do feel like i did the floors rather fast to be fair
@AdamSNook.
2 күн бұрын
i i will move on to somthink else for the next video as i dont want people getting bord of seeing the same work over and over :)
@bigsquatchsasfoot1964
2 күн бұрын
Take my hat off to you Adam doing a job like that out side under a tarp in all weathers takes a lot of balls and determination, well done mate your doing a fine job 👍
@AdamSNook.
2 күн бұрын
Thank you hehe
@banger220
2 күн бұрын
Hi Adam, not sure if I am being a bit thick but where is the link to your Amazon wish list
@AdamSNook.
2 күн бұрын
Under my youtube name will see if I can had it to the commemt section
Heads up,remove any trim parts etc inside,and cover your glass.also U will save £s using grinding stones and finish with flap discs.flap discs don't last 2 mins on welds.
@AdamSNook.
2 күн бұрын
Yeah going to remove the trims and yeah will try to find my stone went walkies dome where
@metalman4141
2 күн бұрын
Great work Adam but this floor welding is dragging on now .
@AdamSNook.
2 күн бұрын
@@metalman4141 ii know but can only do it when i can these are jobs that need doing if i dont film any of i then people will wonder where im gone if people will pefer me to start filming again once the floor is done please comment below
@AdamSNook.
2 күн бұрын
@@metalman4141 i will try to show somthink diffrent in the next video
@chrismaisy3612
2 күн бұрын
Your doing a fab job mate
@AdamSNook.
2 күн бұрын
Thank you
@dreamcatcher.404
2 күн бұрын
You are doing an amazing job!
@AdamSNook.
2 күн бұрын
Thank you
@fredjones1238
2 күн бұрын
safety glasses, mask, ear plugs , mate
@AdamSNook.
2 күн бұрын
Do have some.safty glasses but carnt see properly though them lol it is understand what tou mean safety first
@fredjones1238
2 күн бұрын
@@AdamSNook. you won't see anything if you lose an eye , and we don't won't that to happen , shes starting to come together cheers
@AdamSNook.
2 күн бұрын
@@fredjones1238 that is so true :)
@AliMackMechanical
2 күн бұрын
👍👍👍👈
@kevfit4333
4 күн бұрын
Watching since the start mate. You have done some epic work in a project that most would have considered too far gone and parted off. You've saved this one.
@AdamSNook.
4 күн бұрын
Thank you
@matthewc.419
4 күн бұрын
Yeah , as well as a V8 , id kinda like to drop a BMW M3 straight 6 in a Mk3 cortina too !!!!
@AdamSNook.
4 күн бұрын
yeah or a ford focus st engine hehe
@matthewc.419
4 күн бұрын
@@AdamSNook. that 5 cylinder is insane engine , i allways loved that Quattro noise .........too Wish i still had my old mk3 escort ..........gutted !!!
@dannyharty3656
5 күн бұрын
You can see a lot of progress all ready fantastic job well done
@AdamSNook.
5 күн бұрын
Thank you meams a lot
@colinprice5414
10 күн бұрын
You have done well mate keep up the good work cheers all the best cheers 🍻🤠🇦🇺🦘
@AdamSNook.
10 күн бұрын
Thank you.means a lot
@metalman4141
11 күн бұрын
Bloody hell mate if anyone deserves a medal it’s you 👍
@AdamSNook.
11 күн бұрын
Thank you mate means a lot
@dannyharty3656
5 күн бұрын
I sead it before not many people like adam left in the world right now
@richardmitchell2274
11 күн бұрын
Done well there,loads of welding 👍
@AdamSNook.
11 күн бұрын
Thank you :)
@richardmitchell2274
11 күн бұрын
@@AdamSNook. No worries doing a great job 👍
@alanhiggins1093
11 күн бұрын
Well done good job 👍
@AdamSNook.
11 күн бұрын
thank you
@bigsquatchsasfoot1964
11 күн бұрын
Brilliant work Adam it’s a real treat to see the old girl slowly being bought back to its former glory I think it’s absolutely amazing how far you’ve got it especially out in the drive it’s not like you’re tucked away in a comfy garage ! I have a lot of respect for you taking on a job like this , wish I had the balls to do it …Fab work fella 👍
@AdamSNook.
11 күн бұрын
thank you mate really means a lot :)
@richardtaggart9252
11 күн бұрын
When you paint your floor get some stick down sound proofing and it will look brilliant and hide a lot of repairs
@AdamSNook.
11 күн бұрын
Any idears what sound proothing to ise u would have liked to ise similar to what was down before all I can really find is car audio sound proothing I would like somthink like a tar
@terryatkinson3182
10 күн бұрын
Seam sealer will hide a multitude of sins inside and out. The car didn't have sound proofing so it's not a priority I'd say. 😊@@AdamSNook.
@AdamSNook.
10 күн бұрын
@@terryatkinson3182 yeah im going to use seam sealer im not bothered to much about the welds on top of the floor its underneath i want to make sure is smooth
@terryatkinson3182
11 күн бұрын
Either you have hands like shovels or that grinder is tiny 😂 You'll wear gloves when that disc explodes 🙄 how do I know that 🫣
@AdamSNook.
11 күн бұрын
It is a tiny grinder does not spin that fast would hiw ever wear gloves when using my big grinder lol safety first and I'm guessing younhave had one shatter on you
@terryatkinson3182
11 күн бұрын
@AdamSNook. several times over the years, when you're young things don't bother you but when you're older, you don't heal as fast. Just looking out for you and anyone else I see doing stuff that can hurt you 🫣👍🇮🇪
@gerhard6105
9 күн бұрын
I have had that also. It was in 1993. I used the big 230mm disc grinder and right after start up, the disc exploded in three pieces. I had two other colleagues working in the hall and fortunately the three pieces missed them. The pieces went through the total distance of the hall. Very scary. Yes, already then we Dutch worked safe.
@procta2343
11 күн бұрын
getting there pal, Once that floor pan is sorted, id say that is another mega mile stone completed. Are you still buying spares for it as you go along? When i was doing the metro rebuild, i was adding some bits and pieces in, Such as the electrics, the previous owner decided to add a later steering column, and cut the cars electrics to get it work. While the cars interior was out, it wasn't hard to replace the full loom, to the later one. With in a matter of days i had the cars dash back in.
@AdamSNook.
11 күн бұрын
i havent got anymore parts as of yet but will be soon i do have all the other parts i orded before i need to make a list so i can tick it off as i go
@dereknolan9891
11 күн бұрын
Looking good Adam 👍
@AdamSNook.
11 күн бұрын
Thanks 👍means a lot mate
@classiccarrebuilds2771
13 күн бұрын
Your commitment to saving a car that was so far gone is amazing, it will be worth it when you take to the road for the 1st time 👍👍👍
@AdamSNook.
13 күн бұрын
Thank you means a lot
@festeringfesterer
14 күн бұрын
You need the shroud on the welder tip it directs the gas forwards the job to cool the weld
@AdamSNook.
13 күн бұрын
It's a fluxcore welder no gas
@banger220
14 күн бұрын
Where is your Amazon wish list link Adam
@AdamSNook.
14 күн бұрын
It's in the description at the top that says links
@dannyharty3656
14 күн бұрын
Can't wait to see her on the road adam great job as usual
@AdamSNook.
14 күн бұрын
Thank you.and yeah I carnt wait either
@user-up8fi4nm7n
15 күн бұрын
Davis Joseph Brown Deborah Lewis Jeffrey
@TheJonno1968
15 күн бұрын
I thought there should be a shroud on the end of the welding gun? We used to call that pigeon shit welding back in the day! You doing a good job mate but if I were you I’d try and find someone to help set up your welder and give you some tuition. You doing a better job than I would tho mate. Keep up the good work.
@NeilDurrant
14 күн бұрын
It's flux-core, no need for the shroud.
@petergrinnell2500
15 күн бұрын
Just a bit of advice you need to get that torch a bit closer to the metal your a little to far away and it would do my head in with out the shroud being on the torch as well but the welder sounds alot better and I don't drag mine down like you or going side to side with flux wire (only when using gas) but your doing a good job keep it up mate
@AdamSNook.
15 күн бұрын
Yeah I dont normally have it that far away was just getting back into things lol and thank you
@janandersen8422
15 күн бұрын
optimal distance from weldimg gun to metal is c.a. 3/8 inch, 9 to 10 mm.
@dreamcatcher.404
15 күн бұрын
keep up the amazing work!!!
@AdamSNook.
15 күн бұрын
Thank you! Will do!
@alanhiggins1093
15 күн бұрын
Keep up the good work it’s looking good 👍
@AdamSNook.
15 күн бұрын
Thanks, will do!
@MarkShaw-ll6pm
15 күн бұрын
Doing good I look forward to the next video
@AdamSNook.
15 күн бұрын
Thank you mate looking forward to doing the next one
@bigsquatchsasfoot1964
15 күн бұрын
Hope you had a great holiday! Awesome Adam amazing how different it is already making some great progress mate 👍
@AdamSNook.
15 күн бұрын
Thank you so much yes holiday was great missing it lol found it hard to fit back in when I got home and get moving
@kevinhare7037
15 күн бұрын
Even when not using gas, I'd rather have a shroud and a proper glove to steady it. Keep it a lot closer and do small runs randomly around edge to stop too much heat build up and distortion. Well done for keeping a rare car alive.
@AdamSNook.
15 күн бұрын
yeah i get ya i do have some really good welding gloves now :)
Пікірлер