My 22 Refresh with 6.2L died of the same at about 25k miles. Pulling a 7k lb trailer to go camping. Ruined my vacation. Hard to forgive!
@pablocastillo4529
Ай бұрын
Perfect explanation, thank you
@marcusreed6647
Ай бұрын
They should have had that jaws theme music playing in this video. 😂
@WatchoutNSG
2 ай бұрын
The functionality of the car coming down to a piece of transparent plastic circle cutout
@Secretsofsociety
2 ай бұрын
But Why???
@joeethereal2968
2 ай бұрын
Just copped a new ACDELCO TEHCM & a SONNAX 6L80L valve body with all the updates. $1200+ well invested. Doing a ground-up build for my GMT936 chassis.
@lgpugh35
2 ай бұрын
Thatbis why I plan to get the 6.6 liter crate engine swapped into my GMC SIERRA in the future. It has no dod and afm, just a pure work engine.
@TheRobert1952
2 ай бұрын
Thanks
@desmondpayne9880
2 ай бұрын
Which pressure switch is number 3
@ttt-de6sm
4 ай бұрын
Gonna stick with my 95 Ford 300
@devinsmith3216
4 ай бұрын
Just happened to my 2022 yesterday. 74000 miles. 12k replacement motor. Block is on back order LOL
@Golden_writes550
4 ай бұрын
All covid year vehicles take a dump...
@shawnwagers6061
5 ай бұрын
will a bad phaser make any type of noise while the vehicle is running such as knocking,ticking,
@shanewalsh5493
5 ай бұрын
Clacking noise
@capitalr8649
5 ай бұрын
I replaced the passage sleeve twice and it’s still leaking from the connector. I have a new TECHM installed as well. At this point I’m tired of dropping the pan to address the sleeve. Plus the pins aren’t loose.
@maroman951
5 ай бұрын
I just got done doing the same thing on mine. 2008 escalade. Vehicle would act fine until it got warmed up all the way. And then I would start having random delay shifting RPMs shoot up but no acceleration and most of the time reverse wouldn't engage. Was hoping replacing these discs in the THECM would fix the issue but it did not. Now I'm wondering what else it could be.....
@MyLooneyBin
6 ай бұрын
Well I guess you're not answering comments, but just in case anyone else knows. I did the repair, but I took all the bolts out by feel and am not sure what sizes go where I have 11 bolts. 5 different sizes. Any help would be greatly appreciated. Thanks.
@texastoughcarports2115
6 ай бұрын
2022 gmc sierra 1500 at4 Made in 2021. 75k miles. Dead! 😢
@jaybuss6105
6 ай бұрын
Ok my question is mine moves with pulley and cam shaft is also on driver side close to strut tower.i did timing due to the plastic coming off a guide.starts up runs great drives just that driver side chain will not stay tight
@ม่วนกรุบ
7 ай бұрын
I have a 6L45R transmission in a 2010 E90. My problem is it jerks from 2nd to 3rd gear. Other than that, it's normal to go down from 3 to 2. No fault code The oil is good and not lacking. Can you recommend me?
@viniciusrochafaria6936
6 ай бұрын
Mine does the same only when car is cold
@josecastillero9462
7 ай бұрын
What was the noise like?
@josecastillero9462
7 ай бұрын
What noise did that failure cause?
@josecastillero9462
7 ай бұрын
Que ruido ocasionaba esa falla??
@jackofspades24
7 ай бұрын
With these gm having displacement on demand or afm, the best thing to do is disable this feature. If not it's bound to fail
@shanewalsh5493
7 ай бұрын
I would disable this feature due to the fact that it will fail and cause a repair that costs more than the fuel mileage that it saves.
@khalidkhamis2829
7 ай бұрын
Where you got these tool ? or what is the name of this tool?
So what causes the camshaft to become damaged in the 1st place?? Lack of oil changes?? Etc
@0lz179
9 ай бұрын
Yeah i think so, or the engine oil level has been low. Also could be wrong type of oil used.
@keithpreston7252
10 ай бұрын
Somebody owes Somebody else one whole ass engine free w/ warranty
@jamesricker9707
10 ай бұрын
Hello quick question I wanted to know how long it took you to change out that phaser and if it was difficult or easy I have a 2009 Pontiac G6 GXP with a 3.6 L and I need to change mine out
@shanewalsh5493
10 ай бұрын
Skilled person 2.5 to 3.5 hours. Removal of the intake system to gain access to valve covers . The use of a special tool is required to change the phasor.
@jamesricker9707
10 ай бұрын
@@shanewalsh5493Did you have enough room to take it out with the cover still on?
@shanewalsh5493
10 ай бұрын
Yes, you can take it out with the side cover still on. It's tight but it can be done
@jamesricker9707
10 ай бұрын
@@shanewalsh5493also, was the bolt blocked by the timing cover?
@ejmtnt
11 ай бұрын
My lifters failed at 7k mile as did a friend’s Cadillac same year 6.2. Traded it in for a Red eye go MOPAR
@Titanic19127
11 ай бұрын
Improved on the LFX?
@shanewalsh5493
11 ай бұрын
Yes, new style of chains
@maroman951
11 ай бұрын
Great video thanks for posting. Do you have a link on where you got the repair kit and membranes?
@shanewalsh5493
11 ай бұрын
Rock auto, it's a full kit
@JOULES_ENTERTAINMENT
11 ай бұрын
What are those 3 black links on the chain?.. Are they not for timing of some sort? Or it doesn't matter?
@shanewalsh5493
11 ай бұрын
It does not matter, the chain is just the transfer of power. Most likely to do with how the chain gets assembled at the factory.
@ZeroPlanB
11 ай бұрын
Put all this money into the tech only to cheap out in where it’s most important
@kingstouch8434
Жыл бұрын
Good info!!
@HOWIE_-id1lk
Жыл бұрын
Nice, helped us out a lot. Thanks
@shanewalsh5493
Жыл бұрын
Glad to hear that!
@qosmio2140
Жыл бұрын
Is this even on the HDs?
@DanaLynnette
Жыл бұрын
How long does this repair take please?
@kalani1987
Жыл бұрын
I just did this recently. It did take care of the harsh 1-2 shift, but I still feel a hard/delay shift from P to D. It took me about two hours for everything ( drain, remove pan, remove TCM, seal fix, etc).
@DanaLynnette
Жыл бұрын
@@kalani1987 Thank you. A mechanic just charged me $610 for this. 5 hours of labor
@kalani1987
Жыл бұрын
@@DanaLynnettedid this repair resolve your shift issue?
@DanaLynnette
Жыл бұрын
@@kalani1987 yes, thank God!
@desmondpayne9880
2 ай бұрын
@@DanaLynnette I have a 2010 Chevy Silverado LTZ 6l80 with code p0872 transmission, pressure switch C circuit low do you think this will solve the problem? Thanks in advance.
@dannmann17
Жыл бұрын
Awesome video! I just put some cheap eBay phasers on a 14 Impala and I don’t like the way they sound🤔
@notme8121
Жыл бұрын
It was a lot of information in that short video. Thank you very much! Brief and right to the point. No Nonsense. Well done!
@kalani1987
Жыл бұрын
Wondering if this repair took care of the issues? I have some stored trans codes and have erratic shifting from 1st to 2nd gear.
@terrellscaife2411
Жыл бұрын
That special tool is over $300
@terrellscaife2411
Жыл бұрын
Hey, thanks a lot
@silverado2500wr450
Жыл бұрын
Do you know if you can get both cams out of a 2010 Pilot in the car? I know I can get the front out, but not sure of the rear. Both cam lobes are pitted. Can't get front cam from Honda anymore. Tried getting used heads from salvage yards. All of those had bad cams also. Going to try a reman'd head from parts store, and just take the cam out, and whichever rockers I'll need to replace due to pitting. Rear cam is supposedly still available
@shanewalsh5493
Жыл бұрын
Not sure if you can, it was a tight fit on this model. Sucks to hear that they don't make them anymore..
@silverado2500wr450
Жыл бұрын
@@shanewalsh5493 yes, it's a shame. This engine was used on so many models for so many years. It's a 2010 pilot, it's not that old! It's an auction car somebody bought. When he told me it taps, I thought right away, auction car, probably needs a cam. I've done them before when I worked for Honda, but never had to do a rear one. So I know the front one I can slide out, just not sure about the rear. I would think if you pulled one out of an accord, the pilots bigger, so should be more room. Sounds logical, right? Oh well, guess I'll find out. LoL
@markpieczynski2130
Жыл бұрын
After watching this, I am almost positive I forgot to line up that plunger. Thanks so much!
@florenbaron7111
Жыл бұрын
Will you please link the tools needed to do this job? My car is a 2014 Mustang V6 3.7. Thank you so much.
@Jd-it5si
Жыл бұрын
Where did u get the tool
@ppideappidea
Жыл бұрын
do you have facebook
@Mastroz1
Жыл бұрын
I have an Acura TL and the dealer wants to change out my cam shafts.. is it worth it? It isn’t a cheap service either. What are your thoughts. Apparently they want to do 2 on mine I believe…
@shanewalsh5493
Жыл бұрын
Any damages or worn camshafts lobes .. if not I would not replace them..
@Mastroz1
Жыл бұрын
@@shanewalsh5493 they said it’s starting to wear, I get a ticking noise sometimes when I start my vehicle in the mornings.. $3500 just for that service..
Пікірлер