I have a 2011 that has a leak. I wasn't sure if this was layed out like the 04 we use to have. But it looks like it is which is nice cause I know where everything is. Lol. Thx
@rexhorning7228
3 ай бұрын
You will keep breaking the latch! Need to replace the original door seals. The seals keep the correct tension on the latch. The seals loose the flex and people doing makeshift seals to keep the doors from rattling and leaking air. All the extra force from slamming doors then wears out latch and striker.
@stunnascott1145
4 ай бұрын
My truck doin this
@Davefromwisconsin
5 ай бұрын
I’ve had three different freightliners in the last 18 years where the bunk blower stopped working. Every time it was the PDM, which is the fuse box in the b-pillar. They had water damage from rain water leaking into the cab. If someone knows where to seal it so it won’t leak that would be appreciated but now after replacing the last one I put it in a ziplock bag and installed the screws from the inside of the bag and so far it’s been two years trouble free.
@yosthamsandoval2034
Ай бұрын
Would you have power going to the blower before changing the PDM? Trying to figure my blower problem out
@1notsop
6 ай бұрын
Thanks a lot bro great info I took the fuse out and put it back in and it started working 😊
@user-hz4rn8yk5p
7 ай бұрын
Привет, скажите пожалуйста у меня одинаковый влагоотделитель. Воздух не сбрасывает качает 150 и более
@jameswalker8832
8 ай бұрын
This video is perfect. You have helped and are helping man people save a LOT of hard earned money. May God bless you richly my friend. Thank you. 🙏🏾
@gmeagletransportationllc964
9 ай бұрын
Thanks- Gracias,,
@henryvillate8492
9 ай бұрын
Did it work after you mounted it back ??
@moemoe-qs6bi
9 ай бұрын
Yes
@shawnwillis6496
Жыл бұрын
Thanks bro
@nostradamus9608
Жыл бұрын
Great video, and I'm glad I found it! I had the same idea, but I bought a 2" inner diameter stainless sleeve, and the pipe outer diameter turned out to be 2.14". How flexible are those sleeves in terms of expansion? Thanks!
@Vertikala-pc5ig
Жыл бұрын
Does it helps to eliminate wind noise too?
@Abiberhanu
Жыл бұрын
Your video helped me get my door closed I walked in to shipper to check in came back with a door number but door wouldn't close just held it and backed in then I found this video and used a small rubber band and it worked thanks
@manuelsalgado8510
Жыл бұрын
My drier won’t purge, should I replace the dryer? It’s 8 years old
@TruckerMike089
Жыл бұрын
Hey thank you so much for this video. I'm having similar issues but I don't believe it's my fuse. The fan doesn't come on at all so either the motor is bad or I don't have enough pressure in the system. I would have never known about that fuse box right behind the seat. Good running out there for you partner
@weasel884
Жыл бұрын
This video is extremely informational very well done
@omarcarrillo8170
Жыл бұрын
This video is how not to do it
@renemarrufo7536
Жыл бұрын
Explain ?
@jonathanjohnson8754
Жыл бұрын
Great information. I’m ordering mine tomorrow. You gave me the confidence to do it myself. I’ll follow up and let you know how I did.
@supersetfishing1435
Жыл бұрын
Where did you buy it
@moemoe-qs6bi
Жыл бұрын
Most truck parts store have
@zaidchalabi1599
Жыл бұрын
mine has like an inch gap it leaks so much air and water like im outside also wind move door alot i can put 2 fingers in gap i changed weather strip and hinges striker still there not broken not sure why its this bad
@moemoe-qs6bi
Жыл бұрын
Change striker and latch check latch for or wear and tear
@rubenp8750
Жыл бұрын
Thank for posting. I have this van and was not sure where to start looking for the leak.
@draconis0469
Жыл бұрын
This is friggin awesome ko22105 for the part kit...
@bigtexan3188
2 жыл бұрын
it is called purge valve . I bought it at fleetpride for $82.19. part # otr022105
@raynellbright5298
2 жыл бұрын
Thanks for the video,my Freightliner columbia hing is now giving me problems. It's like it has to be lifted to close. I have new striker & door lach...
@d.j.robinson9424
2 жыл бұрын
Thank you, this was a perfect explanation. I'm changing my dryer filter and purge valve tomorrow, this makes it much easier.👍👍🚛
@midnightpassion43
2 жыл бұрын
HEy, that little screw in the middle that has the two-rubber gasket, is that screw suppose too be tight or slack? I made a mistake in loosening it, while it was inside the valve, but I wasn't sure if it was loose before I bothered it.
@codyq0987
2 жыл бұрын
Q1> Do you have parts number for those O-ring? Q2> After you cut the pipe in the middle of the car, what do you do next? Thank you!
@kovalenkoihor4325
11 ай бұрын
You can use "splice kit" it's basically one more additional connection point which replace the leaking part. But, the better idea is to replace the pipe. On junk yard there are a lot of cars and all of them with those pipes. Not really popular place to break so nobody needs them. Don't ask me how I know.
@virgiliofabian
2 жыл бұрын
Thank you 😊
@ewright7739
2 жыл бұрын
Thanks your video saved me. HVAC breaker fuse was burnt out.
@ped832
2 жыл бұрын
Thanks for the video followed your instructions and it worked perfectly to remove my purge valve.
@user-jt9sd3fx9v
2 жыл бұрын
You helped me sir thanks
@NKM10212
2 жыл бұрын
Great Job👍
@hamzaalkurdy7696
2 жыл бұрын
Mine come on when the engine cold and goes a way when the engine worm up , and it’s happened just in winter
@orlaisperez2073
2 жыл бұрын
Thank you 👍
@samplenotla3847
2 жыл бұрын
Am having that same problem at the moment
@alir5316
2 жыл бұрын
Thank you for the video, just had a same issue on a 2013 paccar peterbilt. The perfect I was looking for
@Omarfure
2 жыл бұрын
thank you so much great tips
@sariamohammed1852
3 жыл бұрын
Thank u bro.
@rdodoms2944
3 жыл бұрын
Hey there where you buy
@wsg12097
3 жыл бұрын
Thanks very helpful
@diegolopez19
3 жыл бұрын
Does the whole Air Dryer need to be unmounted to replace the Release Valve?
@moemoe-qs6bi
3 жыл бұрын
No you can replace it wall mounted
@quattrohead
3 жыл бұрын
I replaced the middle O rings last year with some new purple ones from the rain forest. They are leaking again 8 months later.
@chuckbrown7570
3 жыл бұрын
What was the issue?
@moebenjeddou782
3 жыл бұрын
Next time lower your seat all the way down and u will be able to open the fuse box door without unscrewing
@r2rmusic762
3 жыл бұрын
I dont have power to muy ac compresor have u had that issue
@moemoe-qs6bi
3 жыл бұрын
If the system doesn't have proper pressure you could lose power to ac compressor
Пікірлер